Dentium
SuperLine Digital Simple kit
Surgical guide library for guided implant placement, SuperLine system, exoplan.
Free libraries
2111 libraries
Megagen
MiNi Internal
Titanium implant library with internal hex connection for exoplan planning.
Zest Dental Solutions
Locator
LOCATOR implant library for exoplan; planning removable overdenture cases with attachments.
ZimVie
ZimVie
Implants for planning and guided surgery in RealGUIDE; TSX, TSV, Eztetic platforms.
Zest Dental Solutions
Locator kit
Surgical guide library for planning LOCATOR overdenture guided surgery in exoplan
MIS
MIS
Implant library for digital planning and guided surgery templates in RealGUIDE.
Anthogyr
Anthogyr-Labside-XBase-SA
Implant library for exocad DentalCAD, Labside XBase SA interface geometry for restorations
BEGO
CADAbut 8 2 DO
Prosthetic abutment geometry library for planning restorations in exocad.
BEGO
CADBar 8 1 AN
Implant library for exocad with CADBar 8/1 AN geometry for restorations.
DIO
UF Sub Cemented ABT SSCA 65505
Cemented abutment component for UF Submerged platform, restoration design in exocad.
Expression
Expression V2
Tooth anatomy library for exocad DentalCAD, reference morphology for crowns and bridges
FOBOS
FOBOS-Pallada
Tooth anatomy library: base morphology for crowns and restorations in exocad
Gebdi
Gebdi Tribos L3
Tooth anatomy library, L3 character forms, reference morphology for crowns and bridges in exocad; pronounced relief, sharp incisal edge.
George
George Zacusai PRADIP
Tooth anatomy library for exocad with pronounced surface texture; crowns, bridges, full-contour restorations.
Lorant
Lorant Stumpf 07
Tooth anatomy with detailed morphology for modeling crowns and restorations in exocad.
Lorant
Lorant Stumpf 12
Anatomical tooth library: reference morphology for crowns, bridges, full-anatomy modeling in exocad.
PDL
PDL CatBack1 4.2
Tooth anatomy library: reference morphology for crowns and bridges, pronounced cusps, for exocad.
Anthogyr
Anthogyr-Labside-Temp-Monobloc-MDT
Temporary monobloc component geometry for provisional restorations on MDT interface, exocad.
Anthogyr
Labside SA
exocad implant library with platform geometry for designing implant-supported restorations.
BEGO
CADAbut 0 1 D
Implant geometry for designing restorations on CADAbut interface in exocad.
BEGO
CADAbut 0 5 F
Abutment library for exocad DentalCAD, designing restorations on BEGO interface.
Cowellmedi
Sub R Ti A S06 conid
Implant library for exocad, Submerge R platform, S06 conical connection.
DIO
UF Sub Cemented ABT SSCA 55407
Abutment library for cement-retained restorations, UF Submerged platform, exocad.
DIO
UF Sub DIgital ABT DUR 4570
Digital abutment library for UF Submerged system, implant crown and bridge design in exocad.
Paltop
MUA
Multi-Unit abutment implant library for exocad: screw-retained bridges and full-arch restorations
Grin
Grin Design KS
Tooth anatomy library, KS-style morphologies as reference shapes for crowns and bridges, exocad DentalCAD.
PDL
PDL CatBack1 2.0
Reference tooth morphology for modeling crowns, bridges and full-anatomical restorations in exocad.
Pogarskiy
Pogarskiy Design 1.1
Tooth anatomy library for exocad DentalCAD: starting morphologies for crowns, bridges, restorations.
Pogarskiy
Pogarskiy Design 2.0
Second-generation tooth anatomy library: reference morphologies for crowns, bridges and full-contour restorations in exocad.
Other
Prometheus
Tooth anatomy library for exocad, natural pronounced morphology, reference for monolithic restorations.
Zirkonzahn
zirkonzahn_phonares_bold_universal
Anatomical tooth library, bold morphology, universal shapes for crowns and bridges in exocad
ZRS
zrs03
Anatomical tooth morphology library for exocad; crown, bridge and restoration proposals.
BEGO
Esthetic TTiA NH SCSCXRSRSXRI stock
Implant library for exocad, restoration design on Esthetic connection interface.
DIO
UF Sub Digital ABT DPR 1555
Abutment library with UF Sub Digital connection for exocad, single crowns and bridges
DIO
UF Sub Hybrid Link UNHl 40552
Link geometry library for hybrid abutment, UF Submerged platform, exocad.
DIO
UF Sub Regular Hex CA
Implant library for exocad: Submerged regular platform, hexagonal engaging interface, restorations.
Dentaurum
tioLogic
Implant library for exocad providing geometry for prosthetic component positioning.
Nucleoss
T6 Premil Yenamak
CAD library for exocad DentalCAD: premill titanium blank geometry, T6 implant system, prosthetic superstructures.
DTLab
DTLab.25
Tooth anatomy library for exocad with reference shapes for restorations.
Grin
Grin Design 9
Authorial tooth anatomy: reference morphologies for crowns, bridges, monolithic restorations in exocad.
Jan
Jan Haito M7
Tooth anatomy library, masculine M7 morphology, crown and bridge references for exocad.
Other
Phonar S72_VS
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-anatomic restorations.
ZRS
zrs08
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full restorations.
ZRS
zrs29 ua F19 + 02 up-L
Tooth anatomy library for exocad: reference morphology for crowns, bridges, restorations.
Alpha-Bio
Tec ATID
ATID implants with conical connection and internal hex, exoplan planning.
Alpha-Bio
Tec DFI
Cylindrical implants with internal hex connection for exoplan surgical planning.
Alpha-Bio
Tec NeO CS
Implant library, NeO CS conical platform, for planning in exoplan.
Alpha-Bio
Tec NeO
NeO implant library with internal connection for surgical planning in exoplan.
Alpha-Bio
Tec kit
Surgical guide library for exoplan using GSTK sleeves and planning.
Camlog
CAMLOG PROGRESSIVE LINE PROMOTE PLUS GSM
Progressive-Line implant library with conical connection for surgical planning in exoplan.
Camlog
CAMLOG PROGRESSIVE LINE PROMOTE PLUS SnapIn
PROGRESSIVE-LINE implant library with SnapIn post and Tube-Line connection for exoplan
Camlog
CAMLOG SCREW LINE PROMOTE PLUS GSM
Implant library with internal hex connection for exoplan surgical planning
Camlog
CAMLOG SCREW LINE PROMOTE PLUS SnapIn
Implant library with internal hex and snap-in post for exoplan planning
Camlog
CAMLOG SCREW LINE PROMOTE SnapIn
Implant library with SCREW-LINE SnapIn connection for exoplan planning
Camlog
CONELOG PROGRESSIVE LINE PROMOTE PLUS SnapIn
Titanium implant library for exoplan, conical Morse 6.5° connection, SnapIn, FDA-marked.
Camlog
PilotDrill ProgressiveLine kit
Surgical guide library for exoplan, pilot guided drilling planning, PROGRESSIVE-LINE system.
Camlog
PilotDrill ScrewLine kit
Surgical guide library: guided pilot drills, internal trilobe connection, exoplan planning.
Camlog
RegularBone ProgressiveLine kit
Surgical guide library for guided implant placement, ProgressiveLine platform, Guide System tools, exoplan.
Camlog
RegularBone ScrewLine kit
Surgical guide library for exoplan, internal hex 2.5 mm connection, Roxolid
exocad
universal sleeve
Universal sleeves for surgical guide design in Guide Creator module, exoplan.
Hiossen
ET3
Tapered implant library with internal conical Morse taper connection for exoplan
Hiossen
ET4
Implant library for exoplan, conical connection with internal hex, titanium Grade 4.
Hiossen
OneGuide sleeve
Surgical guide sleeves for guided implant placement, planned in exoplan.
Hiossen
SS GH28
Implant library, internal hex connection, titanium Grade 5, digital planning in exoplan
Implant Direct
Legacy3 SBM
Implant library for exoplan, internal hex connection, titanium Grade 5, FDA.
Implant Direct
Legacy4 HA
Implant library, HA-coated, internal hex connection, for planning in exoplan
Implant Direct
ScrewPlus SBM
Titanium implant library with internal hex connection for exoplan planning
Implant Direct
SwishActive SBM
Bone-level implant library, internal hex connection, SBM surface, for exoplan planning
Implant Direct
sleeve
Surgical sleeve library for guided surgery workflow in exoplan.
Medentika
sleeve
Guide sleeve for surgical templates, for planning guided components in exoplan.
MIS
C1
Titanium implant library with conical Morse taper connection for exoplan
MIS
M4
Implant library, internal hex connection, cylindrical-conical design, self-tapping thread, for exoplan.
MIS
MGUIDE C1 V3 kit
Surgical guide library for exoplan: guided implantation with C1 and V3 implants.
MIS
MGUIDE Pilot kit
Surgical kit library for guided surgery, pilot drilling protocol, for exoplan.
MIS
MGUIDE SEVEN kit
Surgical template library for exoplan; guided SEVEN implant placement, internal hex connection.
MIS
SEVEN
Implant system library with internal hex connection, platform switching, FDA-marked, for exoplan.
MIS
V3
V3 implant library for exoplan planning, conical connection, titanium Grade 23.
MIS
fixation
Surgical guide library for fixation pins, Fixation Pin workflow in exoplan Guide Creator.
MIS
sleeve
Surgical sleeve library for designing surgical guides in exoplan Guide Creator.
Neobiotech
IS II active
Implant library, internal hex connection, bone-level design, for exoplan planning.
nt-trading
Compatible DentsplySirona sleeve
Surgical guide sleeves compatible with Dentsply Sirona for exoplan Guide Creator.
nt-trading
Compatible Straumann sleeve
Straumann-compatible surgical sleeves for guided surgery templates in exoplan.
Azure by ZimVie
Azure by ZimVie
Morse taper connection implant library for guided surgery planning in RealGUIDE
Camlog
Camlog
Implant library with trilobe connection for 3D planning and guided surgery in RealGUIDE.
Hiossen
Hiossen
Multi-line implant components for planning and guided surgery in RealGUIDE.
Implant Direct
Implant Direct
Implant and abutment components for planning and surgical guide design in RealGUIDE.
Medentika
Medentika
Implant planning and surgical guide components for RealGUIDE workflows.
Bredent
Bredent
bredent neo.lign denture teeth library for exocad Full Denture module.
Kulzer
Kulzer
Teeth library for exocad Full Denture and DentureCAD, modeling removable and complete dentures
Myerson
Myerson
Kenson denture tooth library for exocad Full Denture/DentureCAD, approved.
Anthogyr
Abutments centralized-milling
Abutment library for centralized milling, Anthogyr connection, for exocad DentalCAD.
Bicon
SHORT FDUA ImplantLevel
Implant-level reference geometry for restorations with FDUA components in exocad.
DIO
UF Sub Cemented ABT SSCA 75104
Cemented abutment geometry for designing restorations on UF Submerged platform in exocad.
DIO
UF Sub Cemented ABT UNSCA 40405
UF platform abutment geometry for cemented restorations in exocad implant module.
DTLab
DTLab.3
Tooth morphology library for exocad DentalCAD, reference shapes for crowns, bridges, restorations.
Jan
Jan Haito F26
Anatomical tooth library for exocad, author morphology for crowns, bridges, restorations.
VITA
VITA Physiodents-T6S
Tooth anatomy library for exocad: broad, shortened T6S form for crowns, bridges.
VITA
VITA Physiodents-T7M
Tooth anatomy library, medium T7M shape, reference for crowns and bridges in exocad.
Other
g_1
Tooth anatomy library with reference shapes for the exocad DentalCAD modeling wizard.
Other
new
Tooth anatomy library with reference morphologies for crowns, bridges, full-anatomy restorations in exocad DentalCAD.
ZRS
zrs41 ua F31 + 53 up-L
Tooth anatomy library for exocad DentalCAD; reference morphology for upper-left segment crowns.
Cowellmedi
Sub R MU Bar 55 conid
Multi-Unit and bar components library, 55° conical platform, screw-retained frameworks, exocad.
DIO
UF Sub Cemented ABT SSCA 65205
Cementable abutment library for designing crowns and bridges in exocad.
DIO
UF Sub DIgital ABT DUN 3570
UF Submerged digital abutment library for modeling crowns and bridges in exocad
DIO
UF Sub Hybrid Link UFHL 45501
Link geometry library for seating crowns and bridges on titanium base, exocad.
DIO
UF Sub Hybrid Link UFHL 55401
Hybrid Link geometry for modeling implant restorations on UF Sub platform, exocad.
Nondas
Nondas Vlachopoulos
Authored tooth anatomy library for exocad DentalCAD: crowns, bridges, full-anatomy restorations.
PDL
PDL CatBack1 0.3
Reference tooth-shape library for modeling crowns, bridges and full-anatomy restorations in exocad.
PDL
PDL CatBack1 5.0
Tooth anatomy library for exocad: starting crown and bridge forms.
Pogarskiy
Pogarskiy Design 1.4
Reference tooth anatomy library for crowns and bridges in exocad DentalCAD.
Tribos
Tribos - 1
Tooth anatomy library for exocad DentalCAD: modeling crowns, bridges, full-anatomical restorations.
AB Dental
SP NP Direct
Implant library for exocad, direct-to-implant screw-retained restorations on SP NP platform without Ti-Base.
Alpha-Bio
Tec TCT-N
Implant library for exocad with TCT-N connection for implant-supported restorations.
Anthogyr
Anthogyr-Labside-Preface-MDT
Preface MDT interface geometries for positioning implant-supported restorations on scans in exocad DentalCAD.
BEGO
CADAbut 0 1 F
Implant geometry for designing crowns and small bridges in exocad.
BEGO
CADAbut 1 1 F
Abutment interface library for designing implant-supported restorations in exocad.
BEGO
Esthetic CADCAM SCSCXRSRSXRI
Implant library for exocad DentalCAD, SCSCXRSRSXRI interface geometry for restoration design.
DIO
UF Sub Cemented ABT SSCA 45404
Cemented abutment geometry, UF Submerged platform, DIO interface, for exocad.
DIO
UF Sub Cemented ABT SSCA 65404
Cemented UF Submerged abutment geometry for modeling crowns and bridges in exocad.
Thommen
DyTi-Base PF 3 5 Coated Captive Screw
Ti-Base library, coated variant with captive screw, PF 3.5 platform, for exocad.
Anatoly
Anatoly-unique
Tooth anatomy library for exocad DentalCAD, reference for modeling crowns and bridges.
Culp
Culp-Mature
Mature tooth anatomy library, worn cusps; crown and bridge reference for exocad.
DTLab
DTLab.19
Tooth anatomy library for exocad: reference crown shapes for bridges, restorations, predictable contacts.
George
George Zacusai ANNE
Tooth anatomy library with soft morphology, starting forms for crowns and bridges in exocad.
Knut
Knut Miller - Triangular
Tooth anatomy library with triangular morphology, restoration reference for exocad DentalCAD.
Lorant
Lorant Stumpf 19
Tooth anatomy library for exocad, reference morphologies for crowns, bridges, full-anatomy restorations.
Paulo
Paulo Giovanny 1
Tooth morphology library for crowns, bridges, restorations in exocad; natural surface.
Pogarskiy
Pogarskiy Design 1.2
Tooth anatomy library with reference shapes for modeling crowns and bridges in exocad.
Pogarskiy
Pogarskiy Design 3.0
Anatomical tooth library for crowns, bridges and full-contour restorations in exocad.
Other
tribos17
Tooth anatomy library for exocad, morphology references for crowns, bridges, full-contour restorations.
ZRS
zrs02
Anatomical tooth library for exocad DentalCAD with reference crown and bridge morphologies.
Anthogyr
Anthogyr-Labside-Preface-SA
Preface SA interface geometry positioning restorations relative to implant in exocad
BEGO
CADAbut 3 2 D
Abutment geometry library for designing restorations on this interface in exocad DentalCAD.
Cowellmedi
Sub R BTU S06 conid
Implant library with conical connection reference geometry for restorations in exocad.
DIO
UF Sub Digital ABT DPR 3570
Abutment library for exocad, UF Submerged digital protocol, size 3570, implant-supported restorations.
Paltop
ACS
ACS implant library for designing implant-supported restorations in exocad DentalCAD.
Thommen
DyTi-Base PF 5 0 PEEK Captive Screw
PEEK Ti-Base library, PF 5.0 platform, captive screw retains prosthetic screw, exocad.
Other
Gory
Tooth anatomy morphology library for exocad DentalCAD: reference shapes for crowns, bridges.
Jan
Jan Haito F1
Anatomical tooth library with author's morphology for modeling crowns, bridges in exocad DentalCAD.
Marcelo
Marcelo Almeida FI1
Tooth anatomy library for exocad DentalCAD, full-anatomy morphology for crowns and bridges.
Pritidenta
Priti T
Tooth anatomy library for exocad, balanced natural forms for crowns, bridges, restorations.
Smeiga
Smeiga 06
Tooth anatomy library for exocad: reference morphologies, starting shape for crowns and bridges.
geller
geller
Tooth anatomy library for exocad DentalCAD: crowns, bridges, full-anatomical restorations.
Other
hd2
High-detail tooth anatomy library for crowns and restorations in exocad DentalCAD.
VITA
vita3
Tooth anatomy library with reference morphologies as starting shapes for crowns, bridges in exocad.
ZRS
zrs18 ua F08 + 57 up-L
Tooth anatomy library for exocad: frontal F08 and occlusal 57, upper left.
Adin
Dir Con To Implant
Direct-to-implant connection geometries for crowns, abutments and hybrids in exocad.
BEGO
CADBar 3 4 AN
Implant library for exocad DentalCAD with bar geometry and correct connection.
Bicon
SHORT UA Stock Abutment stock
Stock Universal Abutment geometry for restorations on standard UA in exocad.
DIO
UF Sub Cemented ABT UNSCA 40205
Cemented abutment CAD geometry, UF Submerged platform, implant-supported crown modeling for exocad.
DIO
UF Sub Hybrid Link UFHL 45403
Implant library with Link geometry for modeling restorations on titanium base in exocad.
Expression
Expression U3
Tooth anatomy library defining unified morphology for crowns and bridges in exocad
VITA
VITA Physiodents-Z2S
Anatomical library for exocad DentalCAD, Z2S shape for crowns, bridges, full-anatomic restorations.
ashortia
ashortia+
Extended tooth anatomy library for exocad, reference for crowns, bridges, full-anatomy restorations.
Other
care2
Reference tooth shapes for modeling crowns, bridges and full-anatomy restorations in exocad.
geller
geller_1
Tooth anatomy library with reference morphologies for crown and bridge modeling in exocad.
Other
rooted
Tooth anatomy library with root portion for full-form restorations in exocad DentalCAD
ZRS
zrs55
Tooth anatomy library for exocad DentalCAD: modeling crowns, bridges, full-contour restorations.
Implant Direct
RePlant SBM
Implant library with tri-lobe connection, titanium Grade 5, SBM surface, for exoplan planning.
BEGO
MultiPlus System SSCSCXRSRSXRI
Implant library for MultiPlus platform with CAD geometries for implant-supported restorations in exocad.
DIO
UF Sub Digital ABT DMR 2540
Abutment geometry, UF Submerged DMR 2540 platform, for exocad implant module.
Paltop
Int Hex TiBase Round
Ti-Base library for internal hexagon connection, round version, exocad DentalCAD.
DTLab
DTLab.22
Tooth anatomy library for exocad: reference shapes for both jaws, modeling crowns and bridges.
Expression
Expression T1 Exo
Tooth anatomy library: young morphology, distinct cusps, reference forms for exocad DentalCAD.
Expression
Expression V3
Tooth anatomy library for exocad: reference morphology for crowns, bridges, full-contour restorations.
Grin
Grin Design 7
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-anatomy restorations.
Other
Intrepid
Anatomical tooth library with detailed morphologies, reference shapes for crowns and bridges, exocad DentalCAD.
Lorant
Lorant Stumpf 09
Tooth anatomy library: starting morphology for crowns, bridges, full-anatomy in exocad.
Lorant
Lorant Stumpf 13
Tooth anatomy library, upper left central incisor master tooth for exocad crowns.
PDL
PDL CatBack1 1.1
Tooth anatomy library, reference morphology for crowns, bridges, restorations in exocad.
Pogarskiy
Pogarskiy Design 5.1
Tooth anatomy library for exocad with reference morphologies for crowns, bridges, restorations.
Thimble
Thimble Tanlibrary 1
Tooth anatomy library for exocad DentalCAD: crowns, bridges, full-anatomic restorations.
Tribos
tribos-27
Tooth anatomy library for exocad: starting morphologies for crowns, bridges, full-contour restorations
BEGO
CADAbut 0 7 F
Preformed abutment library for designing implant-supported restorations in exocad.
BEGO
CADAbut 1 1 D
Implant library for exocad with abutment geometry for modeling implant-supported restorations.
DIO
UF Sub Cemented ABT UNSCA 40607
Abutment geometry for cemented restorations on UF platform in exocad.
DIO
UF Sub Digital ABT DPR 1540
Abutment geometry with UF Sub interface for implant-based restoration design in exocad.
Glidewell/Hahn
EV LABDP
Implant library for exocad, EV LABDP connection, implant-supported prosthetic design geometry.
Implant Direct
Temp Non Engaging Abutments
Temporary non-engaging abutment geometry for exocad, Non-engaging and FDA variants.
Thommen
DyTi-Base PF 5 0 Coated Captive Screw
Coated Ti-Base abutment, PF 5.0 platform, captive screw, for exocad
Grin
Grin Design 1
Tooth anatomy library for exocad, reference morphology for crowns, bridges, full-anatomy restorations.
Lorant
Lorant Stumpf 06
Tooth anatomy library: reference morphology for crowns, bridges and full-anatomy restorations in exocad.
Nondas
Nondas
Authored tooth anatomy library for exocad DentalCAD: source morphologies, crowns, bridges, restorations.
VITA
VITA Physiodents-T8L
Anatomical T8L tooth-shape library for crowns, bridges and full-contour restorations in exocad.
Other
haitof1
Tooth anatomy library for exocad, base shapes for crowns and bridges.
ZRS
zrs56
Tooth anatomy library with reference morphologies for crowns and restorations in exocad.
Anthogyr
Anthogyr-Labside-Flexibase-SA
Ti-Base library for implant-supported prosthetic restorations in exocad.
BEGO
CADAbut 0 1 NH
Implant geometry for designing cement- and screw-retained restorations in exocad
BEGO
Esthetic CADCAM NH SCSCXRSRSXRI
Implant library for exocad DentalCAD, Esthetic CADCAM NH interface, platforms SC, SCX, RS, RSX, RI.
BEGO
Semados Pre-milled SCSCXRSRSXRI
Pre-milled blank library for designing custom abutments and screw-retained restorations in exocad.
Cowellmedi
Sub N DA S11 conid
exocad implant library, Submerged Narrow platform, conical DA S11 connection geometry.
DIO
UF Sub DIgital ABT DCR 2570
Abutment library for exocad, DIO UF Submerged connection, implant-supported crowns and bridges.
DIO
UF Sub Hybrid Link UNHl 40402
Link geometry library for hybrid abutment base, UF Submerged platform, exocad.
Paltop
Conical TiBase Round
Ti-Base geometry for conical connection with round non-antirotation interface, exocad
Other
Bravo
Tooth anatomy library with reference crown and bridge morphologies for exocad DentalCAD.
Expression
Expression T3
Tooth anatomy library with aged, slightly worn morphology and smoothed occlusal relief for exocad.
Expression
Expression U2
Tooth anatomy library for exocad: reference morphology for crowns, bridges, full-anatomic restorations.
Gebdi
Gebdi Tribos L6
Tooth anatomy library, expressive L6 morphology; reference for crowns and bridges in exocad.
Lorant
Lorant Stumpf 15
Reference canine shape (tooth 13) for crown and bridge modeling in exocad.
Marcelo
Marcelo Almeida MC1
Tooth anatomy library for exocad, reference for metal-ceramic restorations: crowns, bridges, full anatomy.
PDL
PDL CatBack1 0.4
Reference tooth anatomy library for automatic crown and bridge shape proposals in exocad.
Pogarskiy
Pogarskiy Design 2.2
Tooth anatomy library for exocad DentalCAD: crowns, bridges, full-anatomic restorations.
Pogarskiy
Pogarskiy Design 6.3
Anatomy library for exocad: reference forms for crowns, bridges, full-anatomy restorations.
Other
TRITON
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-contour restorations.
ZRS
zrs26 ua F16 + 07 up-L
Tooth anatomy library for exocad, reference morphology of upper-left segment, crowns and bridges
ZRS
zrs33 ua F23 + 53 up-L
Tooth anatomy library, upper left canine reference morphology for exocad
ZRS
zrs35 ua F25 + 10 up-L
Tooth anatomy library for exocad: upper left second premolar, reference morphology.
ZRS
zrs40 ua F30 + 04 up-L
Anatomy library for exocad: upper left tooth morphology, reference for crowns and bridges.
BEGO
CADBar 5 1
Implant library for exocad with geometry for designing implant-supported restorations.
Cowellmedi
Sub N Ti S11 conid
exocad implant library, Sub N S11 conid interface, conical connection for restorations.
DIO
UF Sub Cemented ABT SSCA 45107
Subgingival cemented abutment; exocad library for modeling crowns on it.
DIO
UF Sub Cemented ABT UNSCA 40507
Cemented abutment library for crown modeling in exocad DentalCAD.
DIO
UF Sub DIgital ABT DLN 5570
Digital abutment library for exocad, modeling crowns, bridges, custom suprastructures.
Glidewell/Hahn
NB-AC
Implant library for exocad with NB-AC interface, single and bridge restorations.
Glidewell/Hahn
NB-RP
Implant library for exocad with NB-RP interface geometry for restorations
Thommen
Milling Abutment
Millable abutment library for designing custom abutments on implants in exocad.
CTD
CTD5
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-contour work.
Grin
Grin Design EAS
Tooth anatomy library for exocad DentalCAD: reference morphologies for crowns, bridges, monolithic restorations.
Juan
Juan Carlos Palma FHD
Tooth anatomy library for exocad DentalCAD; reference shapes for crowns, bridges, restorations.
PDL
PDL CatBack1 5.1
Tooth anatomy library, morphology reference for crown and bridge modeling in exocad.
Pogarskiy
Pogarskiy Design 0.0
Tooth anatomy library for exocad DentalCAD; base morphologies for crowns and bridges.
Other
care1
Anatomical library of reference crown shapes for modeling restorations in exocad DentalCAD.
Zirkonzahn
zirkonzahnTRITON
Anatomical tooth library with bold occlusal forms for crowns, bridges, exocad
BEGO
Conical TiA SCRSX CC stock
Implant library with conical connection for restoration modeling in exocad DentalCAD.
DIO
UF Sub Cemented ABT SSCA 55205
Cemented abutment library, UF Submerged platform, for restoration modeling in exocad.
DIO
UF Sub Cemented ABT SSCA 65405
Cemented abutment geometry, UF Submerged platform, for exocad crown and bridge design
DIO
UF Sub DIgital ABT DLN 3570
Abutment library with UF Sub connection for designing restorations in exocad
DIO
UF Sub DIgital ABT DUN 5570
Digital abutment library with geometry for modeling implant-supported restorations in exocad.
DIO
UF Sub Digital ABT DMR 2570
Digital submerged protocol abutment geometry, size DMR 2570, for exocad restorations.
DIO
UF Sub Digital ABT DMR 4570
Implant library with UF Submerged abutment geometry, DMR 4570 platform, for exocad.
Nucleoss
Angled TiBase
Angled Ti-Base geometries for designing crowns and small bridges with angle correction in exocad.
Expression
Expression S2
Tooth anatomy library, S character variant 2, reference morphology for crowns and bridges in exocad DentalCAD.
Grin
Grin Design MS
MS-style tooth anatomy: reference shapes for crowns, bridges, restorations in exocad DentalCAD.
VITA
vita-T8L
Tooth anatomy library for exocad DentalCAD: reference morphologies for crowns and bridges.
Camlog
CAMLOG SCREW LINE PROMOTE PLUS Guided
SCREW-LINE Promote plus implants for guided surgery planning in exoplan
Implant Direct
ReActive SBM
Titanium implant library for exoplan: conical body, internal hex, three-point indexation, FDA.
Implant Direct
ScrewIndirect SBM
Implant library for exoplan: external hex, titanium, tissue-level with multi-unit abutments
Implant Direct
SwishPlus SBM
Titanium implant library with internal hex connection for exoplan planning.
Medentika
Quattrocone
Implant system library, conical connection with internal hex, titanium, for exoplan.
Neobiotech
IT III active 28
Implant library for exoplan, tissue-level with internal hex connection, SLA surface.
nt-trading
Compatible Camlog sleeve
Sleeve library for planning and producing surgical guides in exoplan.
Adin
TMA-MU multiunit support
Multi-Unit geometry library for TMA platform, screw-retained restorations in exocad.
Adin
Temporary Library
Temporary component library for provisional restorations on implants, exocad DentalCAD
Adin
Ti-base CloseFit UNP-NP
Ti-Base geometry with CloseFit UNP-NP interface for crowns and bridges in exocad.
Anthogyr
Anthogyr-Labside-Temp-Abutment-DT
Temporary abutment with component for provisional restorations on Preface DT interface in exocad.
Anthogyr
Anthogyr-Labside-XBase-MDT
Labside XBase MDT geometry library for designing implant-supported restorations in exocad.
BEGO
scanbody BEGO-SCRC 113small
Scanbody library for exocad, defines digital implant position reference, 113 small variant.
Cowellmedi
Sub N DA S06 conid
Implant library, DA S06 configuration, Submerged Narrow platform, conical connection, for exocad.
Cowellmedi
Sub R BTU S11 conid
Implant library for exocad with conical interface for implant-supported restorations.
DIO
UF Sub Cemented ABT UNSCA 40505
Cemented abutment geometry on UF platform for restoration design in exocad
DIO
UF Sub Digital ABT DPR 2555
Abutment geometry, UF Sub Digital connection, article DPR 2555, single crowns and bridges, exocad.
Anatoly
Anatoly-oval
Anatomical tooth library with oval shapes, reference for crowns and restorations, exocad.
Expression
Expression O1
Tooth anatomy library for exocad DentalCAD: crowns, bridges, full-anatomy restorations.
Gebdi
Gebdi Tribos L4
Tooth anatomy library, L4 character, reference for crowns and restorations in exocad.
Other
Marz Artegal
Tooth anatomy library with reference morphologies for crowns, bridges and full-contour restorations in exocad.
ZOO
ZOO Cat
Tooth anatomy library for exocad with cat-inspired morphology for crowns and bridges.
ZRS
zrs44 ua M02 + 02 up-L
Anatomical tooth library for exocad, upper-left jaw morphology, reference for crowns and restorations.
ZRS
zrs46 ua M04 + 04 up-L
Anatomical tooth library, symmetric M04+04 morphology, upper-left jaw, crown reference for exocad.
Adin
Ti-base Int-Hex Coni-Con
Ti-Base geometry with Internal Hex Coni-Con connection for crowns and bridges on titanium base, exocad.
BEGO
CADAbut 5 2 NH
Abutment library for exocad, implant interface geometry, 5.2 NH platform
Cowellmedi
Sub R Ti S06 conid
Implant library for exocad DentalCAD, Submerge R interface, S06 variant, conical connection.
DIO
UF Sub DIgital ABT DUN 2570
Digital abutment library for designing implant-supported restorations in exocad DentalCAD.
DIO
UF Sub Digital ABT DMR 4540
UF Submerged abutment library, DMR 4540 platform, crown and bridge modeling in exocad.
DIO
UF Sub Hybrid Link UFHL 55502
Implant library with Link geometry for UF Sub Hybrid in exocad DentalCAD.
Glidewell/Hahn
IOSSA
Implant library with IOSSA connection geometry for designing implant-supported restorations in exocad.
Expression
Expression V1
Tooth anatomy library with reference morphology for crowns and bridges in exocad.
Lorant
Lorant Stumpf 18
Anatomical upper left first molar, reference morphology for modeling in exocad DentalCAD.
ZRS
zrs25 ua F15 + 56 up-L
Upper-left tooth anatomy library for crown and bridge modeling in exocad.
ZRS
zrs31 ua F21 + 53 up-L
Reference tooth anatomy for exocad, F21 morphology with 53 left variant.
Anthogyr
Anthogyr-Labside-HealFit-SH-BL
Geometry library for laboratory bone-level implant restorations, HealFit connection, exocad.
BEGO
CADBar 8 1
Implant library for exocad DentalCAD, geometry for designing implant-supported restorations.
Cowellmedi
Sub RN MU DA 45
Angled 45° Multi-Unit interface for full-arch prostheses on MU abutments, exocad.
DIO
UF Sub Cemented ABT SSCA 45304
Cemented abutment geometry library, UF Submerged platform, for exocad implant CAD.
DIO
UF Sub Cemented ABT SSCA 45505
Cemented abutment library with digital geometry for restoration design in exocad.
DIO
UF Sub Cemented ABT SSCA 55405
Cement-retained abutment CAD geometry, UF Submerged platform, for exocad DentalCAD.
DIO
UF Sub Cemented ABT SSCA 75407
Cemented abutment library for modeling crowns and bridges in exocad, SSCA platform.
Glidewell/Hahn
TAPERED
Tapered-connection implant library for designing prosthetic restorations in exocad
DOF
DOF
Tooth anatomy library: reference morphologies for modeling crowns and restorations in exocad.
Jan
Jan Hajto F6
Tooth anatomy library, feminine F6 morphology for crowns and bridges, exocad.
Pogarskiy
Pogarskiy Design 5.2
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-anatomy restorations.
VITA
VITA Physiodents-T2S
Tooth anatomy library, compact T2S frontal morphology for crowns, bridges, full-contour restorations in exocad.
Zirkonzahn
ZZ - Zirkonzahn
Tooth anatomy library for exocad; expressive morphological style, reference for restoration modeling.
ZRS
zrs32 ua F22 + 08 up-L
Upper left lateral incisor anatomy, reference form for anterior crowns in exocad.
Adin
Ti-base Touareg-Swell RS
Ti-Base interface geometry for modeling implant crowns and bridges in exocad.
DIO
UF Sub Cemented ABT UNSCA 40207
Cementable UF Submerged abutment geometry for building restorations in exocad.
DIO
AQ-TiBase DIO-UF2
Ti-Base geometry, AQ system, UF2 interface, for crowns and bridges in exocad.
Thommen
DyTi-Base PF 3 5 PEEK Removable Screw
Ti-Base geometry for implant restorations on PEEK base, removable screw, exocad.
Thommen
VARIOmulti Gen1 multiunit
First-generation Multi-Unit library for screw-retained restorations on Gen1 platform, exocad.
Ceramill
Ceramill Mindforms by Knut Miller - rectangular
Tooth anatomy library for exocad, rectangular morphologies referencing crowns and bridges
Expression
Expression G2
Tooth anatomy library for exocad DentalCAD: shape source for crowns, bridges, full-contour restorations.
Other
Kelvin
Tooth anatomy library for exocad: reference shapes for crowns, bridges, full-contour restorations.
PDL
PDL CatBack1 0.2
Tooth morphology set with reference shapes for crowns, bridges, restorations in exocad.
Peak
Peak Point - Triangular
Triangular tooth anatomy library, reference morphology for crowns and restorations in exocad.
Pogarskiy
Pogarskiy Design 6.4
Tooth anatomy library with reference morphologies for crowns, bridges, restorations in exocad.
robtoly
robtoly-unique
Tooth anatomy library with expressive, individually crafted morphologies for exocad DentalCAD.
Zirkonzahn
zirkonzahn_z_10
Anatomical tooth library with occlusal style for crowns, bridges, restorations in exocad.
ZRS
zrs05
Anatomical tooth library for exocad; morphological variant base for crowns, bridges, restorations.
ZRS
zrs14 ua F04 + 07 up-L
Tooth anatomy set, anterior F04 and occlusal 07, upper-left jaw, exocad.
BEGO
CADAbut 5 2 D
Abutment library for exocad DentalCAD, CADAbut 5.2 D interface, implant restoration design.
BEGO
CADBar 0 7 MultiPlus
Implant library with CAD-bar geometry and MultiPlus interface for exocad.
BEGO
CADBar 17 1 AN
Implant interface library for exocad, anti-rotational geometry for single-tooth restorations
DIO
UF Sub Cemented ABT SSCA 65407
Cemented abutment geometry for UF Submerged platform; crowns and bridges in exocad.
DIO
UF Sub DIgital ABT DLN 3555
Abutment for implant-supported restorations, UF Sub platform, for exocad.
DIO
UF Sub DIgital ABT DUR 2570
Abutment geometry, UF Submerged platform, for implant-supported restoration design in exocad.
DIO
UF Sub DIgital ABT DUR 5555
Digital abutment geometry, UF Submerged platform, configuration 5555, for exocad.
DIO
UF Sub Hybrid Link UNHl 40551
Link library for UNHl hybrid base on UF Submerged platform, exocad.
Glidewell/Hahn
ZI
Implant library for exocad DentalCAD with ZI connection geometry for restorations.
Implant Direct
Smart Base Cylinders
SmartBase cylinder geometry as support for implant-supported restorations in exocad.
Nucleoss
MU TiBase
Multi-Unit and Ti-Base geometries for single crowns and screw-retained bridges in exocad.
Thommen
DyTi-Base PF 4 5 PEEK Captive Screw
Ti-Base geometry for crowns and small bridges, PF 4.5 platform, captive screw, exocad
Expression
Expression S1
Tooth anatomy library, S character morphology, for crowns and bridges in exocad DentalCAD.
Hilton
Hilton Riquieri
Tooth anatomy library for exocad with morphologies for crowns, bridges, restorations.
Jan
Jan Hajto M7
Tooth anatomy library based on M7 morphology for designing crowns and restorations in exocad.
Pogarskiy
Pogarskiy Design 6.1
Tooth anatomy library for exocad DentalCAD: reference crown, bridge and restoration shapes.
VITA
VITA Physiodents-O5L
Tooth anatomy library, O5L mould, morphological reference for crowns and restorations in exocad DentalCAD.
ZRS
zrs13 ua F03 + 05 up-L
Tooth anatomy library, upper-jaw morphology reference for crowns and bridges in exocad.
AB Dental
Fully Guided sleeve
Sleeves for fully guided surgical templates in exoplan
Adin
Swell
Swell parallel-wall implants, V-thread, AB/AE surface, for exoplan planning.
Adin
Touareg CloseFit
Implant library with conical connection and internal hex for exoplan planning.
Adin
Touareg OS
Library of tapered spiral implants with Internal Hex for exoplan planning.
Adin
Touareg S
Conical spiral implant library with internal hex connection for exoplan
Adin
Touareg S
Implant library with conical Morse taper connection for exoplan planning
Adin
Touareg UniFit
Touareg implant library with UniFit conical connection for exoplan surgical planning.
Adin
adinguide Narrow kit
Surgical guide library for guided implant planning, narrow platform
Adin
adinguide kit
Surgical guide library for exoplan, fully guided workflow via titanium sleeves.
Adin
fixation
Fixation pin library for surgical guide planning in exoplan.
Adin
sleeve
Surgical sleeve library for designing guided surgery templates in exoplan.
Alpha-Bio
Tec ICE
ICE implant library for surgical planning in exoplan, Internal Hex connection.
Alpha-Bio
Tec NICE
Implant library with Morse taper conical connection for surgical planning in exoplan.
Alpha-Bio
Tec SPI
Implant library with internal hex connection for exoplan surgical planning.
Alpha-Bio
Tec fixation
Fixation pin library for exoplan surgical guides, guided surgery workflow
Alpha-Bio
Tec sleeve
Surgical sleeve library for designing guided implant templates in exoplan.
Anthogyr
sleeve
Metal guide sleeve library for designing surgical guide templates in exoplan.
BEGO
Pilot kit
Pilot surgical guide library for navigated initial drilling in exoplan.
BEGO
Semados Mini
Implant library for planning Semados Mini system in exoplan
BEGO
Semados RI
Semados RI implant library for surgical planning in exoplan software.
BEGO
Semados RS Pro
Implant library for exoplan planning, internal hex with Morse taper connection
BEGO
Semados RS RSX kit
exoplan guided surgery library, Morse taper connection, compatible with BEGO Guide.
BEGO
Semados RS
Surgical library of tapered self-tapping implants with hex connection for exoplan.
BEGO
Semados RSX Pro
Planning library of Semados RSX implants with conical connection for exoplan.
BEGO
Semados RSX
Conical self-tapping implant library with platform switching for exoplan surgical planning.
BEGO
Semados S kit
Surgical guide library for exoplan enabling fully guided Semados S implant planning.
BEGO
Semados S
Titanium implant library for exoplan planning, S-Line series, various indications.
BEGO
Semados SC
Self-tapping cylindrical implant library, Grade 4 titanium, internal hexagon connection, for exoplan.
BEGO
Semados SCX
Implant library for exoplan, conical Morse taper connection with internal hexagon.
BEGO
sleeve
Surgical sleeve library for guided surgery templates in exoplan.
Bicon
Integra CP
Titanium implant library with conical locking taper connection for exoplan planning.
Bicon
sleeve
Sleeve library for surgical guide design in exoplan Guide Creator.
Bredent
SKYplanX Pilot kit
Surgical guide library for exoplan, pilot guided drilling protocol
Bredent
SKYproguide R HB D1 kit
Surgical guide library for exoplan; guided surgery, Hard Bone D1 protocol.
Bredent
blueSKY
Bone level implant planning with Morse taper conical connection for exoplan.
Bredent
fixation
Fixation pin library for designing surgical guides in exoplan.
BTI
Externa Universal Plus
Implant library with external hexagon Universal Plus platform for exoplan planning.
BTI
Externa Universal
Implant library with external hex connection, Universal platform, for exoplan.
BTI
Interna 30
Implant library with internal hex connection for exoplan surgical planning.
BTI
Interna Narrow
Narrow platform Interna implants with internal hex connection for exoplan.
BTI
Interna Universal Plus
Implant library with internal hex Universal Plus connection for exoplan planning.
BTI
Interna Universal Plus
Implant library with Morse taper conical connection for exoplan surgical planning
BTI
Interna Universal
Implant library with Interna internal hex connection for exoplan surgical planning.
Camlog
CAMLOG SCREW LINE PROMOTE GSM
Surgical guide library for implant planning workflow in exoplan
Camlog
CAMLOG SCREW LINE PROMOTE PLUS old
SCREW-LINE Promote Plus implant library, internal hex connection, for exoplan planning
Camlog
CAMLOG SCREW LINE PROMOTE old
SCREW-LINE Promote implant library with internal hex connection for exoplan
Camlog
CONELOG PROGRESSIVE LINE PROMOTE PLUS GSM
Implant library, internal conical hex connection, digital planning in exoplan.
Camlog
CONELOG SCREW LINE PROMOTE PLUS GSM
Implant library for exoplan, internal Morse taper 3.5° connection, titanium, FDA-marked
Camlog
CONELOG SCREW LINE PROMOTE PLUS Guided
Implant library with conical Morse taper connection for guided surgery in exoplan.
Camlog
CONELOG SCREW LINE PROMOTE PLUS SnapIn
Implant library for exoplan, conical Morse taper connection, Promote plus surface, snap-in.
Camlog
CONELOG SCREW LINE PROMOTE PLUS old
Titanium implants with conical Morse taper connection, for exoplan planning.
Camlog
DenseBone ProgressiveLine kit
Surgical guide library in exoplan for PROGRESSIVE-LINE implants, dense bone drilling.
Camlog
iSy
Titanium implant library for exoplan, internal Trilobe connection, FDA version for US implant planning
Camlog
sleeve
Surgical sleeve library for guided implant planning in exoplan, Guide System.
Dentis
sClean SQSL
Implant system library, SQSL platform, FDA-cleared parts, for exoplan planning.
Dentis
sClean straight
Implant library for exoplan planning; titanium, internal hexagon, straight type, FDA-marked.
Hiossen
OneGuide kit
Surgical guide library for exoplan; guided implant placement and digital planning.
Hiossen
SS GH18
Implant library with internal hex connection for digital planning in exoplan, FDA version.
Implant Direct
GoDirect
Tissue-level one-piece implant library for overdenture cases, internal hex, exoplan, FDA-marked.
Implant Direct
InterActive SBM
Implant library for exoplan; Morse taper connection, platform switching, titanium Grade 5.
Implant Direct
InterActive kit
Surgical guide library for exoplan, InterActive connection, guided surgery via DIRECTguide.
Implant Direct
Legacy1 HA
Titanium HA-coated implant library, internal hex conical connection, for exoplan planning.
Implant Direct
Legacy1 SBM
Titanium implant library, internal hex connection, SBM surface, for exoplan planning
Implant Direct
Legacy2 HA
Implant library for exoplan, HA coating, conical internal hex, titanium Grade 23.
Implant Direct
Legacy2 SBM
Titanium implant library with internal hex connection for exoplan planning.
Implant Direct
Legacy3 HA
Implant library for exoplan: conical Morse connection, internal hex, titanium.
Implant Direct
Legacy4 SBM
Titanium implant library with internal hex connection and SBM surface for exoplan.
Implant Direct
ScrewPlant SBM
Implant system library with internal hex connection for exoplan planning.
Implant Direct
SimplyIconic SBM
Conical implant library with internal hexagon SimplePlatform connection for exoplan.
Implant Direct
Standard kit
Surgical guide library for exoplan supporting the standard surgical implant kit.
Implant Direct
simply Inter Active SBM
Implant library with SBM surface, internal hex connection, for exoplan planning.
Implant Direct
simplyLegacy2 SBM
Implant library with SBM surface, internal hex connection, for exoplan, FDA-cleared.
Implant Direct
simplyLegacy3 SBM
Tapered implant library with Internal Hex connection, for exoplan planning
Implant Direct
simply Re Active SBM
Implant system library for guided surgical planning in exoplan, FDA‑marked.
Implant Direct
simply Re Plant SBM
Implant planning library for exoplan, FDA-cleared, with compatible Ti/PM/DC prosthetic components.
Keystone
Genesis
Implant system library with conical Morse taper connection for exoplan planning.
Medentika
Microcone kit
exoplan surgical guide library for implant planning and guide design.
Medentika
Microcone
Implant library with conical Morse taper internal connection for exoplan planning
Medentika
Minicone kit
Surgical guide library for exoplan, Minicone line, not compatible with guided surgery.
Medentika
Minicone
Implant library with internal hex connection for exoplan planning; guided surgery incompatible.
Medentika
Procone
Implant system library with conical Morse taper connection for exoplan.
Medentika
Quattrocone kit
Surgical guide library for exoplan, guided implant planning, Morse taper conical connection.
Medentika
Quattrocone30
Titanium implant library with conical Morse taper connection for exoplan guided planning.
medentis
ICX ActiveMaster BL
Implant library with conical Morse taper connection for exoplan planning.
medentis
ICX Premium TL
Tissue level implant library with internal hex connection for exoplan planning.
Neobiotech
IS III active
Implant planning data for surgical guide design in exoplan, SLA surface.
Neobiotech
IT III active 18
Tissue-level titanium implants, internal hex connection, SLA surface, for exoplan.
Neobiotech
IT III active WN18
Tissue-level implant library for exoplan; internal hex connection, SLA surface, FDA-cleared.
Neobiotech
IT III active WN28
Tissue-level implant library, internal hex non-submerged, titanium, for exoplan.
Neobiotech
Narrow kit
Surgical guide library for exoplan, Narrow kit, IS-III/IS-II/IT-III active implant systems.
Neobiotech
RegularWide kit
Surgical guide library for navigated implant placement, NaviGuide system, exoplan.
Neobiotech
fixation
Surgical guide library for fixation screws, guide planning and fabrication in exoplan
Neobiotech
sleeve
Surgical guide sleeves for exoplan, VARO Guide guided surgery system.
Neoss
Guide kit
Surgical guide library for exoplan, 3.5–6.0 system, fully guided Neoss implant placement.
Neoss
Guide sleeve
Guide sleeve library for surgical templates, planning and drilling in exoplan.
Neoss
ProActive Edge
Implant library, conical internal Morse taper connection, titanium grade 4, for exoplan.
Neoss
ProActive Straight 325
Narrow Ø3.25 implant library, Morse taper connection with anti-rotation hex, exoplan.
Neoss
ProActive Straight
Straight titanium implant library, conical internal-hex connection, for exoplan planning.
Neoss
ProActive Tapered
Tapered implant library, internal Morse taper connection, titanium Grade 4, for exoplan
Neoss
ProActive Wide
Wide implant library with conical Morse 11.5° connection for exoplan.
nt-trading
UniversalPilot sleeve
Guide sleeve library for surgical templates, universal pilot platform, exoplan.
SIN
Epikut Plus CM115
Implant library for exoplan, conical Morse taper 11.5° connection, immediate loading.
SIN
EpikutGuide sleeve
Sleeve library for surgical guide, guided implant placement planning in exoplan.
SIN
StrongSW HI
Implant library with internal hexagon connection for exoplan planning.
SIN
StrongSWC Plus CM115
Implant library with conical Morse taper connection for exoplan planning.
SIN
Unitite kit
exoplan surgical guide library for guided placement of Slim and Compact implants.
SIN
UnititeSlim
Implant library for narrow spaces, internal hexagon connection, titanium, exoplan.
Steco
StecoGuide Compatible DentsplySirona sleeve
Surgical guide library with guide sleeves compatible with Dentsply Sirona, for exoplan.
Steco
StecoGuide Compatible Straumann sleeve
Surgical guide sleeves for template design, Straumann-compatible, for exoplan.
Sweden Martina
Hexagonal sleeve
Guide sleeves for surgical templates, guided surgery planning in exoplan.
Sweden Martina
Kohno SP
Implant library with Morse conical connection for planning in exoplan.
Zest Dental Solutions
sleeve
Surgical guide sleeve, single guide sleeve for LOCATOR Guided Kit, exoplan.
Adin
Adin
Implant components for digital planning and guided surgery in RealGUIDE; connection unspecified.
Alpha-Bio
Alpha-Bio
Implant library for digital planning and surgical guide design in RealGUIDE.
BEGO Implant Systems
BEGO Implant Systems
Implant library with internal Morse taper connection for RealGUIDE planning.
Bicon
Bicon
Titanium implant planning components for RealGUIDE guided surgery; 1.5° locking taper connection.
Blue Sky Bio
Blue Sky Bio
Implant models for RealGUIDE: 3D placement planning and surgical guide design.
Bredent
Bredent
Implant components for digital implant planning in RealGUIDE, SKY lines.
Dentis
Dentis
Internal-connection implant models for planning and surgical guide design in RealGUIDE
DESS
DESS
Prosthetic components and abutments library for popular implant systems, RealGUIDE planning.
DIO Implant
DIO Implant
Components for digital implant planning and guided surgery in RealGUIDE
Hahn
Hahn
Titanium implant components, internal hex connection, for planning and guided surgery in RealGUIDE.
Neobiotech
Neobiotech
Implant components for RealGUIDE: implant planning and surgical guide design
Neoss
Neoss
Implant system components with NeoLoc connection for RealGUIDE planning and surgical guides
P-I Branemark
P-I Branemark
Implant components for digital guided surgery planning in RealGUIDE.
Rhein 83
Rhein 83
Components for RealGUIDE: planning OT Equator and OT Bridge implant systems
SIN Implant System
SIN Implant System
Implant planning and surgical guide components for RealGUIDE workflow.
Sweden Martina
Sweden Martina
Implant library with components for digital planning and guided surgery in RealGUIDE.
Candulor
Candulor
Ceramic NFC+ tooth library for full denture design in exocad
Gebdi
Gebdi
Tribos 501 tooth library for full removable dentures in exocad DentureCAD
MAJOR
MAJOR
Artificial teeth library for full and partial removable dentures, exocad.
Merz Dental
Merz Dental
Digital artificial tooth sets for full removable dentures in exocad DentureCAD.
Ruthinium
Ruthinium
Acrylic teeth library, Acry Plus and Smart lines, lingualized setups for exocad DentureCAD
Schottlander
Schottlander
Tooth library for exocad DentureCAD with setup presets and open files.
SHOFU
SHOFU
Semi-anatomic esthetic teeth for removable and full dentures, digital setup in exocad.
BEGO
CADAbut 3 3 D
Implant library for exocad, 3.3 D platform geometry, designing crowns and bridges
DIO
UF Sub Cemented ABT SSCA 55104
Cemented UF Submerged abutment geometry library for implant modeling in exocad.
DIO
UF Sub Cemented ABT UNSCA 40605
Cemented abutment component, UF platform, for restoration planning in exocad.
Glidewell/Hahn
NEO
Implant library for exocad DentalCAD, NEO connection, designing implant-supported restorations.
Paltop
Ti-Temp
Temporary component geometry for designing implant-supported provisional restorations in exocad.
Ceramill
Ceramill Mindforms by NT
Tooth anatomy library for exocad DentalCAD, reference for modeling crowns and bridges.
Grin
Grin Design Drake
Authored themed tooth anatomy for exocad, morphology reference for crowns, bridges, full-contour work.
Hilton
Hilton Riquieri N1
Authorial tooth anatomy set for exocad DentalCAD: shapes for crowns, bridges, restorations.
Marcelo
Marcelo Almeida MI1
Tooth anatomy library for exocad: crowns, bridges, full-anatomy reconstructions.
PDL
PDL CatBack1 5.2
Reference tooth anatomy for crowns, bridges and restorations in exocad.
Pogarskiy
Pogarskiy Design 0.3
Tooth anatomy library for exocad DentalCAD, reference for crowns, bridges, full-anatomical restorations.
BEGO
CADAbut 0 5 D
Abutment geometry library for planning implant-supported crowns and bridges in exocad.
BEGO
CADBar 16 1
Implant library for exocad, BEGO CADBar 16 connection geometry for prosthetic restorations.
Bicon
SHORT UA Custom Abutment LP
Library for designing custom low-profile abutments for SHORT implants in exocad.
DIO
UF Sub Cemented ABT UNSCA 40105
Abutment geometry for exocad, designing cemented crowns on UF Submerged implants.
Glidewell/Hahn
STR
Implant library with STR interface for restoration design in exocad.
Expression
Expression P2
Tooth anatomy library, second P-line variant; reference morphology for restorations in exocad.
Expression
Expression P3
Tooth anatomy, reference jaws for crowns and restorations in exocad DentalCAD.
Thimble
Thimble Tanlibrary 2
Tooth anatomy library for exocad DentalCAD: crowns, bridges, full-anatomic restorations.
Matt Roberts
matt roberts
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, restorations.
ZRS
zrs09
Tooth anatomy library for exocad DentalCAD, reference crown shapes for prosthetics.
ZRS
zrs12 ua F02 + 53 up-L
Tooth anatomy library, upper jaw morphology, crown and restoration reference for exocad.
ZRS
zrs21 ua F11 + 05 up-L
Upper-left tooth anatomy library, F11+05 combination, crown modeling reference in exocad.
ZRS
zrs34 ua F24 + 53 up-L
Upper left first premolar anatomy for exocad; F24 profile, palatal scheme 53.
ZRS
zrs50 ua M08 + 05 up-L
Tooth anatomy library for exocad: upper M08 form with lower 05 analog.
AB Dental
MU-P64
Multi-Unit MU-P64 geometries for screw-retained crowns and bridges in exocad.
BEGO
CADBar 1 1
Implant geometry library for designing bar-supported restorations in exocad
BEGO
CADBar 3 2
Bar geometries for implant restorations in exocad DentalCAD, BEGO implant interface.
Cowellmedi
Sub R ANG S06 conid
Implant library defining angled conid connection interface for exocad restorations.
DIO
UF Sub Digital ABT DMR 3540
Submerged abutment library, DMR 3540 size, for modeling crowns and bridges in exocad.
DIO
UF Sub Hybrid Link UFHL 45701
Implant library with Link geometry for modeling crowns and bridges in exocad.
CTD
CTD3
Tooth anatomy library with morphologies as references for crowns and bridges in exocad.
DTLab
DTLab.0
Tooth anatomy library for exocad: reference morphologies for designing crowns and restorations.
DTLab
DTLab.20
Tooth anatomy library for exocad DentalCAD with reference crown and bridge shapes.
DTLab
DTLab.6
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, restorations.
Expression
Expression O3
Tooth anatomy library with soft organic occlusion for crown modeling in exocad.
Gebdi
Gebdi Tribos L2
Tooth anatomy library, L2 forms for modeling crowns and restorations in exocad.
Lorant
Lorant Stumpf 20
Tooth anatomy library for exocad; reference geometry for crowns, bridges, restorations.
Pogarskiy
Pogarskiy Design 2.1
Tooth anatomy library for exocad: crowns, bridges, monolithic full-contour restorations.
VITA
VITA PHYSIODENS T6S L1S O25E U25E
Tooth anatomy library with T6S, L1S, O25E, U25E shapes for exocad crowns and bridges.
Anthogyr
Anthogyr-Labside-XBase-DT
Ti-base geometries for designing implant-supported restorations on DT interface in exocad
Anthogyr
SRBB centralized-milling
Implant geometries with SRBB interface for centralized-milling implant restorations in exocad
BEGO
CADAbut 3 3 NH
Implant library for exocad DentalCAD: abutment geometry, non-hex connection, restoration design.
Cowellmedi
Sub R MU Ti 55
Multi-Unit component for screw-retained restorations on 55° titanium MU abutments, exocad.
DIO
UF Sub Cemented ABT SSCA 55404
Abutment library for cement-retained restorations, UF Submerged platform, exocad.
DIO
AQs-TiBase DIO-UF2
Ti-Base library with AQs UF2 interface for crowns, bridges, hybrids in exocad
Glidewell/Hahn
NB-AC IOSSA
Implant library with NB-AC interface and IOSSA scanbody for exocad.
Thommen
DyTi-Base PF 5 0 Coated Removable Screw
Coated Ti-Base geometry, PF 5.0 platform, removable screw, for exocad.
DTLab
DTLab.8
Tooth anatomy library for exocad DentalCAD: crown morphologies, bridges, full-anatomical restorations.
Knut
Knut Miller - Universal
Tooth anatomy library with balanced universal shapes for exocad DentalCAD.
Lorant
Lorant Stumpf 14
Anatomical exocad library: reference tooth for crowns and small anterior bridges.
Marcelo
Marcelo Almeida MC3
Tooth anatomy set for crowns, bridges and full-anatomy restorations in exocad.
Pogarskiy
Pogarskiy Design 6.0
Tooth anatomy library for exocad with reference shapes for crowns, bridges, restorations.
Zirkonzahn
zirkonzahnHERMES
Dynamic tooth anatomy for exocad: pronounced relief, crowns, bridges, full-anatomical restorations.
DIO
UF Sub Cemented ABT SSCA 55207
Cementable UF Submerged abutment library for designing crowns and bridges in exocad.
DIO
UF Sub Cemented ABT SSCA 75507
Abutment geometry for modeling cemented crowns and bridges, SSCA platform, exocad.
DIO
UF Sub Digital ABT DPR 3540
Implant library for exocad DentalCAD with submerged abutment geometry, size 3540.
Noris
MultiUnit
Multi-Unit geometries for screw-retained bridges and full-arch restorations in exocad.
Thommen
PF3 0 VARIOunite
VARIOunite PF3.0 interface library for implant-supported restoration design in exocad.
Other
Alex_Jim_G31
Anatomical tooth library for exocad, author morphologies for crowns, bridges, restorations.
Jan
Jan Hajto F7
Tooth anatomy library, feminine F7 morphology for crowns and bridges in exocad.
Jan
Jan Hajto M5
Tooth anatomy library, morphological variant M5, for modeling crowns and restorations in exocad.
Lorant
Lorant Stumpf 11
Tooth anatomy library for exocad DentalCAD; crown, bridge, full-anatomy proposals.
Other
PAIAN
Tooth anatomy library for exocad DentalCAD, base morphologies for crowns and restorations.
PDL
PDL CatBack1 0.0
Tooth anatomy library for exocad, source morphologies for crowns, bridges, restorations.
Pogarskiy
Pogarskiy Design 0.4
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-contour restorations.
Smeiga
Smeiga 05
Tooth anatomy library for exocad, base forms for crowns, bridges, restorations
VITA
VITA Physiodents-X2L
Anatomical X2L shape library for crowns, bridges and full-anatomic restorations in exocad.
VITA
vita1
Tooth anatomy library for exocad: morphology references for crowns, bridges, full-contour restorations.
ZRS
zrs10
Tooth anatomy library for exocad: reference shapes for crowns, bridges, restorations.
Anthogyr
Anthogyr-Labside-Preface-DT
Preface DT interface geometry: digital reference aligning restoration to implant in exocad.
BEGO
CADAbut 3 1 F
Abutment library for exocad DentalCAD, 3.1 F platform, designing implant-supported restorations.
BEGO
Conical TTiA SCRSX CC stock
Implant library for exocad, BEGO Conical connection, for crown and bridge design.
DIO
UF Sub Digital ABT DMR 1570
UF Submerged digital-protocol abutment geometry, size DMR 1570, for crowns and bridges, exocad.
DIO
UF Sub Hybrid Link UNHl 40401
Link geometry library for hybrid restorations on UF Sub platform, exocad.
Thommen
DyTi-Base PF 4 5 Coated Removable Screw
Ti-Base geometry, coated 4.5 platform, removable screw, implant crowns and bridges in exocad.
DTLab
DTLab.15
Tooth anatomy library, reference shapes for modeling crowns and restorations in exocad.
Other
Dem
Tooth anatomy library for exocad: crown forms as reference morphology for single crowns, bridges, full-anatomy restorations.
Other
Esthetic
Tooth anatomy library with reference shapes for natural restorations in exocad
George
George Zacusai YANN
Tooth anatomy library, reference shapes for crowns and bridges in exocad.
Knut
Knut Miller - Rectangular
Rectangular tooth anatomy library, reference morphology for restorations in exocad.
Lorant
Lorant Stumpf 08
Tooth anatomy library: crown morphology as starting proposals for full-anatomy exocad restorations.
Smeiga
Smeiga 03
Tooth anatomy library for exocad DentalCAD, reference morphologies for prosthetic modeling.
Other
custom
Tooth shape set for exocad, neutral base for crowns, bridges, full anatomy
Other
denti
Anatomical library of reference crown morphologies for restoration modeling in exocad DentalCAD
generic
generic
Tooth anatomy library for exocad DentalCAD: reference morphologies for crowns, bridges, full-anatomy restorations.
ZRS
zrs01
Anatomical tooth library, morphology template for crowns and bridges in exocad.
ZRS
zrs04
Anatomical tooth library for exocad, morphology set for crowns and bridges
BEGO
CADBar 5 2 AN
Implant library for exocad with geometry referenced when designing restorations
Cowellmedi
Sub N ANG S06 conid
Interface geometry for designing implant restorations on Sub N angled conical connection in exocad.
DIO
UF Sub Cemented ABT UNSCA 40305
CAD form of cemented abutment, UF Submerged platform, for exocad restoration modeling.
Euroteknika
Naturall Natea
exocad library with geometries for implant-supported restorations on two implant lines.
Noris
InternalHex
Implant library with internal hexagonal connection for exocad implant module.
Thommen
VARIOflex temp peek ScanAb
Temporary PEEK scan abutment for designing implant-supported provisional restorations in exocad.
Other
DEMI
Tooth anatomy library: reference shapes loaded as morphology for crowns, bridges in exocad.
DTLab
DTLab.13
Tooth anatomy library for exocad: reference morphologies as templates for crowns and bridges.
Expression
Expression U1
Tooth anatomy library with universal morphology for exocad, neutral cusp and fissure pattern.
Pogarskiy
Pogarskiy Design 3.2
Tooth anatomy library for exocad, modeling crowns, bridges, full-anatomy restorations.
BEGO
CADAbut 1 1 NH
Abutment geometry library for designing implant-supported restorations in exocad.
BEGO
CADAbut 3 1 D
Implant library for exocad DentalCAD, interface geometry for implant-supported restorations
Cowellmedi
Int R Ti S10 conid
Titanium base library for prosthetics on conical connection in exocad
DIO
UF Sub Hybrid Link UFHL 45502
Implant library for exocad with Link geometry, modeling restorations on titanium base.
DIO
UF Sub Hybrid Link UFHL 45703
Link geometry library for exocad, designing implant-supported restorations on the matching interface.
Thommen
Ti-Base
Ti-Base geometry library for designing crowns and abutments in exocad.
Ceramill
Ceramill Mindforms by Knut Miller - oval
Tooth anatomy library with oval morphologies for crowns and restorations in exocad.
PDL
PDL CatBack1 1.3
Tooth anatomy library for exocad, reference shapes for crowns, bridges, full-contour restorations.
PDL
PDL CatBack1 3.0
Tooth anatomy library, CatBack1 morphology, position 3.0, for crowns and bridges in exocad.
Pogarskiy
Pogarskiy Design 6.2
Tooth anatomy library for exocad DentalCAD: crowns, bridges, full-anatomical restorations.
VITA
VITA Physiodents-T1S
Tooth anatomy library, narrow youthful morphology; reference for crowns, bridges, full-anatomical restorations in exocad.
Other
c
Anatomical tooth reference forms, starting morphology for crowns and full-anatomy restorations in exocad.
Matt Roberts
el_MatRoberts
Reference tooth anatomy library for modeling crowns and bridges in exocad.
Adin
TMA multiunit support
Multi-Unit geometry library for modeling superstructures on MU abutments in exocad.
Anthogyr
Labside DT
Implant library for exocad providing geometry for designing implant-supported restorations.
BEGO
CADAbut 1 2 NH
Abutment library with non-rotating connection for modeling implant restorations in exocad.
BEGO
CADAbut 1 4 F
Abutment library for exocad: positioning crowns and bridges on implant interface.
BEGO
CADBar 11 1
Implant library with CADBar geometry for implant-supported restorations in exocad DentalCAD.
Bicon
SHORT UA Copings stock
Stock coping geometry for crowns on SHORT UA abutments, exocad.
DIO
UF Sub Cemented ABT SSCA 45205
Subgingival cemented abutment, SSCA 45205 connection, abutment library for exocad DentalCAD.
DIO
UF Sub Cemented ABT UNSCA 40107
CAD abutment geometry for cemented UF Submerged connection, exocad crown modeling
DIO
UF Sub Cemented ABT UNSCA 40307
Cemented UF Submerged abutment geometry for exocad, digital fit for implant-supported restoration
DIO
UF Sub Cemented ABT UNSCA 40407
Cemented abutment for designing crowns and small bridges in exocad.
AIDA
AIDA-Air
Anatomical tooth library with lighter morphology and soft relief for exocad.
DTLab
DTLab.23
Tooth anatomy library for exocad DentalCAD: reference shapes for crowns, bridges, full-contour restorations.
Juan
Juan Carlos Palma UFHD
Ultra-high-detail anatomical tooth library with microrelief for aesthetic restorations in exocad.
Lorant
Lorant Stumpf 16
Upper left first premolar anatomy, Stumpf style, master tooth for exocad.
PDL
PDL CatBack1 1.0
Reference tooth morphology, starting shape for crowns and restorations in exocad DentalCAD.
PDL
PDL CatBack1 3.1
Anatomy library, CatBack1 position 3.1, base for crowns, bridges, monolithic exocad work.
ZRS
zrs06
Anatomical tooth library for exocad: morphological variant defining crown, bridge, restoration shapes.
ZRS
zrs43 ua M01 + 60 up-L
Tooth anatomy library for exocad, M01+60 morphology, upper left segment.
Adin
Ti-Blank Int-Hex Coni-Con
Ti-blank library for exocad with Internal Hex and Coni-Con connections
Anthogyr
Anthogyr-Labside-Temp-Abutment-SA
Temporary abutment for provisional restorations, SA connection, for exocad.
BEGO
CAD-CAM BegoSemados Ti Base
Ti-Base geometries for implant-supported crowns and bridges, BegoSemados connection, exocad.
BEGO
CADBar 6 1
Implant library for exocad DentalCAD with connection geometry for bar-supported restorations.
Cowellmedi
Sub R Ti A S11 conid
Implant library with conical connection, Submerge R S11 platform, for exocad.
Cowellmedi
Sub R Ti B S06 conid
Implant library with Submerge R interface, B/S06 variant, conical connection, for exocad.
Glidewell/Hahn
AS
Implant geometry for designing implant-supported restorations on the AS platform in exocad.
Glidewell/Hahn
NB-RP Hybrid Bar
Bar geometry library on NB-RP interface for implant-supported bar restorations in exocad.
Implant Direct
Smart Base Engaging 6mm
Engaging SmartBase abutment geometry, 6mm height, for exocad implant restoration design
Thommen
DyTi-Base PF 3 5 Coated Removable Screw
Coated Ti-Base geometry with removable screw, PF 3.5 platform, for exocad.
Thommen
DyTi-Base PF 4 5 PEEK Removable Screw
Ti-Base geometry, PF 4.5 platform, removable screw variant, for exocad.
Thommen
VARIOflex temp
Temporary component library for designing provisional implant restorations in exocad.
Brenes
Brenes-Elchi Round
Tooth anatomy library with rounded morphology, reference for crowns and restorations in exocad.
Other
Enterprise
Tooth anatomy library with reference morphologies for modeling crowns and bridges in exocad.
Knut
Knut Miller - Oval
Oval-shaped tooth anatomy library, reference for anterior restorations in exocad DentalCAD.
PDL
PDL CatBack1 5.3
Tooth anatomy library, reference shapes for modeling crowns and bridges in exocad.
Pritidenta
Priti Q
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, restorations.
Other
THALIA
Tooth anatomy library for exocad DentalCAD: reference shapes for crowns, bridges, full-anatomy restorations.
ZOO
ZOO Crocodile
Tooth anatomy library for exocad, reptile-inspired reference shapes for crowns and bridges.
ZRS
zrs15 ua F05 + 07 up-L
Tooth anatomy library for exocad: frontal F05 and posterior 07, upper left jaw, crowns and bridges.
ZRS
zrs37 ua F27 + 07 up-L
Upper left second molar anatomy, F27 buccal with 07 palatal, exocad.
AB Dental
I10 Trapeze
exoplan library for planning I10 trapezoidal implant, marked FDA cleared.
AB Dental
I2 ScrewType
Screw-type implants with internal hex connection for exoplan planning
AB Dental
I5 Conical
Implant library with conical connection for surgical planning in exoplan.
AB Dental
I55 Conical
Conical implant library with internal hex connection for exoplan surgical planning
AB Dental
Partially Guided sleeve
Sleeves for partially guided surgical templates in exoplan, ABGuided protocol.
Adin
Swell
Swell implant library for surgical planning in exoplan software.
Adin
Touareg OS
Touareg OS implant library with internal hex connection for exoplan planning.
Anthogyr
AXIOM BL 28
Planning of 2.8 mm narrow implants with internal hex in exoplan.
Anthogyr
AXIOM BL PX
Bone level implant library with external hex connection for exoplan planning.
Anthogyr
AXIOM BL REG
Axiom Bone Level implant library, REG profile, conical connection for exoplan
Anthogyr
AXIOM BL REG
Bone Level implant library, REG profile, conical connection, for exoplan.
Anthogyr
AXIOM TL PX
Tissue-level implant library for surgical planning in exoplan
Anthogyr
AXIOM TL REG
Tissue-level implants, internal hex connection, for surgical planning in exoplan
Anthogyr
AXIOM TL X3
Tissue Level implants with conical connection for exoplan surgical planning.
Anthogyr
FirstDrill kit
Surgical guide library for guided pilot drilling protocol in exoplan.
Anthogyr
Mini Implant
One-piece mini implants with Optiloc connection for overdenture stabilization, exoplan.
Anthogyr
fixation
Surgical guide library for exoplan with fixation pins for guide planning
Bicon
3.0mm kit
Guided surgery library for exoplan, Morse taper connection, 3.0 mm platform.
Bicon
4.0mm kit
Surgical guide library for exoplan supporting guided surgery with 4.0mm instruments.
Bicon
4.5mm kit
Surgical guide library for exoplan, guided surgery workflow, 4.5mm system.
Bicon
5.0mm kit
Surgical guide library for exoplan, guided osteotomy using 5.0mm kit.
Bicon
Pilot kit
Surgical guide library for exoplan, pilot drilling based on Bicon protocol
Biotech Dental
Kontact MB GH18
Monoblock implants with transgingival collar and Morse taper connection for exoplan
Biotech Dental
Kontact N
Surgical guide library for Kontact N implant planning in exoplan
Biotech Dental
Kontact S
Implant planning library for exoplan, Morse taper connection with internal hexagon
Biotech Dental
Kontact
Kontact implant library for surgical guide planning in exoplan software.
Biotech Dental
Kontact
Kontact implant system library with internal hex connection for exoplan
Bredent
SKYclassic
SKY Implant System library with internal hex connection for exoplan planning
Bredent
SKYplanX MB D234 kit
Surgical guide library for exoplan, guided surgery and digital implant planning workflow.
Bredent
SKYproguide C MB D234 kit
Guided surgery template library for exoplan with drill sleeves and fixation pins.
Bredent
SKYproguide Pilot kit
Surgical guide library for exoplan, pilot drilling, Guide Creator, fixation pins
Bredent
SKYproguide sleeve
Surgical guide sleeve library for SKY Pro Guide system, exoplan.
Bredent
miniSKY
miniSKY implant library with Morse taper connection for exoplan planning.
Bredent
narrowSKY
Narrow implant library with internal hex connection for exoplan surgical planning.
Bredent
sleeve
Surgical guide sleeves for guided implant workflows in exoplan.
Bredent
whiteSKY Alveo
One-piece zirconia implant library for immediate placement planning in exoplan.
Bredent
whiteSKY TL
One-piece zirconia Tissue Line implant library for surgical planning in exoplan.
BTI
Externa Tiny
Narrow-platform TINY implants with external hex connection for exoplan planning
BTI
Externa Universal Plus
Implant library with external hex connection for exoplan surgical planning
BTI
Interna Universal
Implant system library with internal hex connection for exoplan planning
BTI
Interna Wide
Wide-platform Interna implant library for surgical planning in exoplan.
BTI
Interna Wide
Interna Wide implant library with internal hex connection for exoplan.
Camlog
CERALOG Hexalobe
Zirconia implant library with Hexalobe internal connection for planning in exoplan.
Conexao
Slim Porous
Titanium implant library with internal hex connection for exoplan planning.
Dentaurum
tioLogic TwinFit
Implant system library with internal hexagon connection for exoplan planning.
Dentis
Simple Guide Plus kit
Surgical guide library for exoplan, guided implant planning, open guide system.
Dentis
sClean OneQSL
Implant library with OneQ-SL connection for digital planning in exoplan, FDA-cleared.
Dentis
sClean SAVE
Titanium implant library, internal hex connection, for exoplan planning, FDA cleared.
Dentis
sClean SQSL
Bone-level implant library with internal hex connection, titanium, for exoplan planning.
Dentis
sClean tapered
Tapered implant library, internal hex connection, for exoplan planning
FGM
fixation
Surgical guide library with anchor pins for template planning in exoplan.
GC
Aadva Standard
Titanium implant library with internal hex connection for exoplan planning.
Global D
InKone Primo
Implant system library with conical connection for implant planning in exoplan.
Global D
sleeve
Surgical sleeve library in steel for guided implant surgery planning in exoplan
Implance
BoneLevel
Guided surgery and implant planning library for Bone Level system, exoplan.
Intra-Lock
kit
Surgical guide library for guided placement of Fusion implants in exoplan.
Keystone
Genesis kit
Surgical guide library for exoplan, conical internal hex connection, fully guided implant placement.
Keystone
Paltop Advanced Classic
Implant library, conical Morse taper connection, titanium, exoplan guided planning; Ti, DC, PM, MU components.
Keystone
Paltop Advanced Classic
Implant library with internal hex connection, titanium, planning in exoplan, FDA-marked.
Keystone
Paltop Advanced Plus
Advanced+ implant system library with digital planning components for exoplan.
Keystone
PaltopDynamic
Implant library with conical internal-hex connection for exoplan surgical planning
Keystone
PaltopPCA
Paltop Conical Active implant library with Morse taper conical connection for exoplan planning.
Keystone
PrimaPlus
Implant library, Morse taper conical connection, immediate loading, for exoplan
Klockner
ESSENTIAL CONE
Tissue-level implant, conical Morse taper connection, transmucosal neck, guided planning in exoplan.
Klockner
Guide kit
Surgical guide library for exoplan: guided surgery planning with sleeves and fixation pins.
Klockner
VEGA
Implant system library for exoplan; conical Morse taper connection, platform switching, titanium.
Leone
29
Implant library with internal hex for exoplan, narrow bone volumes.
Leone
3D fixation
Surgical guide library for exoplan, guided surgery, 3D fixation connection.
Leone
3D kit
Surgical guide library for exoplan: digital implant planning and CAD-CAM guide design.
Leone
3D sleeve
Surgical guide sleeve library with 3D sleeve components for exoplan.
Leone
Classix
Cylindrical titanium implant library with internal hexagon connection for exoplan planning.
medentis
ICX ActiveMaster TL
Tissue-level implant library for guided surgery planning in exoplan.
medentis
ICX Premium BL
Titanium bone level implant library with conical connection for planning in exoplan.
SIN
Epikut HE
Titanium implant library with external hex connection for exoplan planning.
SIN
Epikut Plus HE
Implant library with external hex connection for exoplan; universal use, immediate loading.
SIN
Epikut Plus HE
Implant library with external hex connection for exoplan planning, FDA version.
SIN
Revolution
Titanium implant library for exoplan planning; conical connection with internal hex.
SIN
StrongSW CM16
Implant library with 16° Morse taper conical connection for exoplan
SIN
StrongSW HE
Titanium implant library with internal hex connection for exoplan planning.
SIN
StrongSW Plus CM16
Implant library with 16° Morse taper connection for exoplan planning.
SIN
StrongSW Plus HE
Implant library with external hex connection for planning in exoplan.
SIN
StrongSW Plus HI
Implant library with internal hex connection for planning in exoplan.
SIN
StrongSW kit
Surgical guide library for exoplan: narrow sleeves, color coding, flexible sleeve positioning.
SIN
StrongSWC CM115
Implant library with 11.5° Morse taper conical connection for exoplan planning
SIN
Tryon
Implant library with internal conical connection for surgical guide planning in exoplan.
SIN
UnititeCompact
Unitite-line implant library for surgical planning in exoplan, FDA-marked.
SIN
UnititePrime
Implant library with conical Morse taper connection for clinical planning in exoplan.
SIN
fixation
Fixation pin library for surgical guides, guided surgery planning in exoplan.
SIN
sleeve
Surgical sleeve library for guided implant placement in exoplan, flexible positioning.
Southern Implants
Deep Conical Cylindrical
Titanium implants, Morse taper conical connection, cylindrical shape, platform shift, for exoplan.
Southern Implants
Deep Conical Tapered
Implant library for exoplan, deep conical Morse taper internal connection, self-tapping thread, platform shift, titanium
Southern Implants
Ext Hex Cylindrical
Cylindrical implant library with external hex connection for exoplan planning.
Southern Implants
Ext Hex Cylindrical
Cylindrical implant library with external hex connection for exoplan planning.
Southern Implants
Ext Hex Cylindrical Int Drive
Titanium cylindrical implant library, external hex connection, internal drive, for exoplan.
Southern Implants
ExtHexMax
Implant library, External Hex MAX connection for molar replacement, exoplan.
Southern Implants
Ext Hex Max8
Implant library with External Hex connection for immediate molar replacement, exoplan.
Southern Implants
Ext Hex Platform Switch
Implant library with external hex connection and platform switching for exoplan planning.
Southern Implants
Ext Hex Platform Switch
Implant library with external hex platform switching for exoplan planning; FDA-compatible.
Southern Implants
Ext Hex Tapered Int Drive
Implant library, external hex, tapered body, optional Internal Drive, for exoplan.
Southern Implants
ITTapered
Conical tissue-level implant library with internal octagon connection for exoplan.
Southern Implants
InvertaDC
Titanium implant library with internal hexagon connection for exoplan planning.
Southern Implants
Inverta Ext Hex
INVERTA implant library, External Hex connection, FDA version for exoplan planning.
Southern Implants
ProvataMax
Implant planning library for exoplan, FDA-cleared version of the planning line.
Southern Implants
Tri NexMax
Implant library for exoplan: internal tri-lobe, platform shift, tapered/parallel-walled, FDA-marked.
Southern Implants
Tri NexTapered
Implant library with tri-lobe interface, internal hex and platform shifting; FDA, exoplan.
Southern Implants
kit
Surgical guide library for exoplan; guided surgery, manufacturer kits, digital template planning.
Southern Implants
sleeve
Sleeve components for designing surgical guides in exoplan, guided surgery workflows.
Steco
StecoGuide Compatible NobelBiocare sleeve
Surgical guide library for exoplan with titanium sleeves compatible with Nobel Biocare.
Sweden Martina
CSR RN
Implant library with internal Morse Cone conical connection for exoplan planning.
Sweden Martina
CSR ST
Implant library with conical Morse taper connection for exoplan planning
Sweden Martina
Circular sleeve
Surgical sleeves for designing guides in exoplan; standard indexed and non-indexed.
Sweden Martina
Echoplan Pro A kit
Surgical kit library for guided implant planning with cylindrical implants in exoplan.
Sweden Martina
Echoplan Pro S HardBone kit
Surgical guide library for exoplan: sleeves, guides and drills for guided implant placement in dense bone.
Sweden Martina
Echoplan Pro S SoftBone kit
Surgical guide library for exoplan, guided implant placement protocol in soft bone.
Sweden Martina
Kohno Straight
Tissue-level implant library with straight neck, for planning in exoplan.
Sweden Martina
KohnoOne
Titanium implant library with Morse taper conical connection for exoplan
Sweden Martina
Outlink2
Implant library with external hex connection for exoplan surgical planning
Sweden Martina
Prama LongNeck
Implant library with long transgingival neck, internal hex connection, titanium, for exoplan.
Sweden Martina
Prama RF SL LongNeck
Long-neck implant library, Morse taper conical connection, titanium, for exoplan
Sweden Martina
Prama RF SL
Implants with transgingival neck and Morse taper conical connection for exoplan.
Sweden Martina
Prama RF machined
Implant library with conical endosseous body, Morse taper connection, for exoplan.
Sweden Martina
Prama RF
Titanium implant library with conical Morse taper connection for exoplan planning.
Sweden Martina
Prama RF white
Conical Root Form implants, intramucosal system, for planning in exoplan; FDA marked.
Sweden Martina
Prama ShortNeck
Implant library, 1.80 mm short neck, internal Morse taper connection, for exoplan.
Sweden Martina
Prama Slim ShortNeck
Titanium Slim implants for narrow ridges, ShortNeck profile, Morse taper hex connection, exoplan.
Sweden Martina
Prama Slim
Titanium implant library for digital planning in exoplan, conical Morse 6.5° connection.
Sweden Martina
Prama machined
Implant library with Morse taper conical connection and transmucosal profile for exoplan
Sweden Martina
Prama
Implant library with conical Morse taper connection for exoplan planning.
Sweden Martina
Prama white
Implant library, conical Morse taper connection, titanium, for exoplan planning.
Sweden Martina
Premium SP machined
Implant library, Morse taper internal hex connection, Grade 4 titanium, for exoplan.
Sweden Martina
Premium SP
Implant library for exoplan, conical internal-hex connection, titanium ZirTi surface.
Sweden Martina
Premium Straight
Implant library: cylindrical morphology, straight coronal portion, ZirTi surface, FDA-marked, for exoplan.
Sweden Martina
Premium machined
Implant library, internal hex connection, titanium Grade 4, planning in exoplan.
Sweden Martina
PremiumOne machined
Cylindrical implants with asymmetric thread, Morse taper conical connection, for exoplan.
Sweden Martina
PremiumOne
Library of cylindrical implants with internal hexagon connection for exoplan planning, FDA.
Sweden Martina
Shelta
Conical implant library with internal hex connection for exoplan, FDA-marked.
Sweden Martina
Syra SL
Implant library for exoplan, conical connection with internal hexagon, titanium.
Sweden Martina
Syra
Implant system library with conical Morse taper connection for exoplan planning.
Sweden Martina
fixation
Surgical guide library for guided surgery and digital planning in exoplan.
Thommen Medical
CONTACT
CONTACT system implant library for exoplan planning, FDA-cleared components included.
Thommen Medical
ELEMENT MC INC
Cylindrical implant library, internal octagon OCT 6° connection, titanium Grade 4, for exoplan.
Thommen Medical
ELEMENT
Titanium implant library for exoplan, internal hex connection, digital planning
ADIN Triple Implants
ADIN Triple Implants
Implant library with Internal Hex connection for planning and guided surgery in RealGUIDE
Anthogyr
Anthogyr
Axiom implant library with conical Morse connection for RealGUIDE guided surgery planning
Biotech Dental
Biotech Dental
Kontact implants for planning and surgical guides in RealGUIDE, unified connection.
BTI
BTI
Implant library with conical Morse taper connection for RealGUIDE surgical planning
Cortex Dental
Cortex Dental
Implants and guided surgery components for planning and surgical guide design in RealGUIDE
Dentaurum
Dentaurum
Implant system components with internal hex connection for RealGUIDE planning.
Ditron
Ditron
Implant component library for planning and guided surgery in RealGUIDE, Internal Hex connection.
IPD
IPD
Prosthetic components and surgical guides for guided surgery planning in RealGUIDE.
Keystone
Keystone
RealGUIDE library for implant planning and surgical guides, conical internal-hex connection.
Klockner
Klockner
Implant planning components for RealGUIDE; VEGA and Essential Cone systems.
Leone
Leone
Implant components with internal hexagon XCN connection for RealGUIDE guided surgery planning
Southern Implants
Southern Implants
Internal hex implant library for guided surgery planning in RealGUIDE.
Sweden & Martina - tecnica TDC
Sweden & Martina - tecnica TDC
RealGUIDE library for digital implant-prosthetic workflow and surgical guides.
Thommen Medical
Thommen Medical
Implant library with conical EverGuard connection for guided surgery planning in RealGUIDE.
Winsix
Winsix
Implants for digital planning and guided surgery in RealGUIDE.
Polident
Polident
Multilayer composite-acrylic teeth for removable and full dentures, exocad DentureCAD.
Yamahachi
Yamahachi
Artificial teeth library CROWN NS, acrylic resin, anterior molds C/N, for exocad DentureCAD.
Adin
TMA-MU
Multi-Unit platform library for screw-retained bridges and full-arch restorations in exocad
Alpha-Bio
Tec IH
IH connection library for implant-supported prosthetic design in exocad.
BEGO
CADAbut 16 1 NH
Implant library for exocad with abutment geometry for implant-supported restorations.
Bicon
SHORT FDUA Stock
Implant library with stock FDUA geometry for restoration positioning in exocad.
DIO
UF Sub Cemented ABT UNSCA 40707
Cemented abutment library for exocad, UF Submerged platform, for crowns and bridges.
DIO
UF Sub Hybrid Link UFHL 55403
Link component geometry library for hybrid restorations on DIO interface, exocad.
DIO
UF Sub Hybrid Link UFHL 55503
Hybrid Link geometry for scan alignment and implant restoration modeling in exocad.
DIO
UF Sub Hybrid Link UNHl 40403
Link interface for UNHl 40403 hybrid base, UF Submerged platform, exocad.
Glidewell/Hahn
INC
Implant library with connection data for restoration design in exocad DentalCAD.
DOF
DOF_Hemera
Tooth anatomy library: reference morphologies for modeling crowns, bridges, full-contour restorations in exocad.
DTLab
DTLab.11
Tooth anatomy library with reference crown and bridge morphologies for exocad.
Grin
Grin Design 5
Tooth anatomy library for exocad DentalCAD: reference morphology for crowns, bridges, full-anatomy restorations
Jan
Jan Haito M5
Tooth anatomy library with masculine M5 morphology for exocad DentalCAD; crowns, bridges, full-anatomy restorations.
Pogarskiy
Pogarskiy Design 4.0
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, restorations.
Pogarskiy
Pogarskiy Design 5.0
Tooth anatomy library for crowns, bridges and full-anatomic restorations in exocad.
Other
SERAPHIM
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-contour restorations.
ZRS
zrs23 ua F13 + 05 up-L
Tooth anatomy library, upper-left morphology, reference for crown modeling in exocad.
ZRS
zrs38 ua F28 + 09 up-L
Upper left tooth F28+09 anatomy library for exocad; crowns, bridges, full-anatomic work.
BEGO
CADAbut 16 1 D
Abutment library for exocad, designing restorations on BEGO implant interface
BEGO
CADBar 0 1
Bar geometry library for implant-supported restorations on BEGO interface, exocad
BEGO
MultiPlus multiunit support
Auxiliary Multi-Unit geometries for screw-retained restorations on multi-unit abutments, exocad.
Cowellmedi
Sub N ANG S11 conid
Angled Sub N interface library, S11 conid, for exocad implant restorations.
DIO
UF Sub DIgital ABT DLN 5555
Digital abutment library for single and bridge implant-supported restorations in exocad.
DIO
UF Sub Hybrid Link UFHL 45401
Link component for modeling hybrid superstructures on Submerged Hybrid Link connector, exocad.
Glidewell/Hahn
ANK
Implant library, ANK configuration, for designing implant-supported restorations in exocad.
Glidewell/Hahn
STR-SYN
Implant library with STR-SYN connection for exocad, planning crowns and bridges.
Brenes
Brenes-Elchi Square
Tooth anatomy library with square morphology, reference for crowns and restorations in exocad.
Gebdi
Gebdi Tribos L7
Tooth anatomy library with pronounced occlusion, reference form for crowns and bridges in exocad.
PDL
PDL CatBack1 6.3
Anatomical tooth morphology library, reference shapes for crowns, bridges, restorations in exocad.
Shmatkov
Shmatkov (class 2)
Tooth anatomy library, class 2 morphology, crowns and bridges for exocad.
ashortia
ashortia
Author tooth anatomy library for exocad, morphology reference for crowns and restorations
BEGO
CADAbut 0 6 D
Abutment geometry library for exocad implant module, modeling restorations on the component.
BEGO
CADAbut 3 2 NH
Abutment interface geometry library, 3.2 NH platform, restoration design in exocad.
BEGO
CADAbut 5 2 DO
Abutment geometry library for CADAbut 5.2 DO interface, implant restorations, exocad DentalCAD.
BEGO
PS CADCAM NH SCSCXRSRSXRI
Implant library for Semados PS connection, non-engaging CAD/CAM variant, for exocad
DIO
UF Sub DIgital ABT DUN 2555
Digital UF Submerged abutment library for designing single crowns and bridges in exocad.
DIO
UF Sub Hybrid Link UFHL 55703
Link geometry for UF Sub hybrid abutment restorations in exocad.
Glidewell/Hahn
NB-RP Multi
Multi-Unit NB-RP interface library for exocad, restorations on Multi-Unit abutments.
Glidewell/Hahn
iii-CE
exocad implant library with iii-CE connection for implant-supported crowns and bridges.
Nucleoss
TiBase Short Scanbody
Ti-Base with short scanbody for exocad; single crowns, small bridges, limited space.
Paltop
Ti-Abut Blank
Titanium abutment blanks for milling custom abutments in exocad DentalCAD.
Sweden & Martina
CAD-CAM SwedenMartina Ti Base
Ti-Base geometry for designing implant-supported restorations in exocad.
Other
Buran
Tooth anatomy library for exocad: morphologies as starting shapes for crowns, bridges, full-anatomy restorations.
DOF
DOF Hemera
Tooth anatomy library: reference morphology for crowns, bridges, restorations in exocad.
PDL
PDL CatBack1 1.4
Tooth anatomy library for exocad, reference morphology for crowns, bridges, full-anatomy restorations.
PDL
PDL CatBack1 2.1
Tooth anatomy library for exocad, reference morphologies for crowns and bridges
PDL
PDL CatBack1 4.0
Tooth anatomy library, position 4.0, CatBack1 morphology, for exocad DentalCAD.
Smeiga
Smeiga 08
Tooth anatomy library — reference morphologies for modeling crowns and bridges in exocad.
Other
magdalena
Tooth anatomy library for exocad with reference morphologies for crowns, bridges, restorations.
ZRS
zrs11 ua F01 + 07 up-L
Upper jaw tooth anatomy library F01+07 up-L for exocad crowns, restorations.
ZRS
zrs51 ua M09 + 09 up-L
Tooth anatomy library, matched upper-lower morphology pair, reference forms for crowns in exocad.
DIO
UF Sub Cemented ABT SSCA 55504
Abutment geometry for cement-retained crowns and bridges, UF Submerged platform, exocad.
DIO
UF Sub Cemented ABT SSCA 65204
exocad library for designing crowns and bridges on cementable abutment geometry.
DIO
UF Sub Cemented ABT SSCA 65507
Cemented abutment geometry library, UF Submerged platform, for modeling restorations in exocad
DIO
UF Sub Narrow Non Hex CA
Implant library, narrow Submerged platform, non-hex non-engaging interface, for exocad.
Implant Direct
Smart Base Non Engaging 6mm
Non-engaging titanium base, 6mm height, for screw-retained restoration design in exocad.
Thommen
DyTi-Base PF 4 0 PEEK Removable Screw
Ti-Base for 4.0 PEEK base, removable screw, crowns and bridges in exocad.
Grin
Grin Design 2
Tooth anatomy library for exocad DentalCAD, reference morphologies for crowns, bridges, full-contour restorations.
Lorant
Lorant Stumpf 03
Anatomy library: reference morphology for crowns, bridges and full-contour restorations in exocad.
PDL
PDL CatBack1 3.3
Reference tooth anatomy for position 3.3, CatBack1 style, exocad crowns and bridges.
Pritidenta
priti_Q
Tooth anatomy library for exocad: crowns, bridges, full-anatomy restorations.
Zirkonzahn
zirkonzahnDEMI
Tooth anatomy library, morphology reference for crowns, bridges and restorations in exocad.
BEGO
SubTec CADCAM NH S
CAD/CAM component library, NH S configuration, for implant-supported restoration design in exocad.
BEGO
scanbody BEGO 20big
Digital scanbody reference defining implant axis and orientation for exocad
Cowellmedi
Sub R CMT S06 conid
Implant library for exocad with conical connection for implant-supported restorations.
DIO
UF Sub Cemented ABT SSCA 55305
Cemented abutment library for UF Submerged platform, seating surface for exocad crowns.
DIO
UF Sub Cemented ABT SSCA 65207
Cementable UF Submerged abutment library for designing crowns and bridges in exocad.
DIO
UF Sub Cemented ABT SSCA 75305
Cemented abutment SSCA 75305 library from UF Submerged line for exocad crown design.
DIO
UF Sub DIgital ABT DCR 3555
Abutment library for UF Submerged system, implant-supported restoration design in exocad.
Dentaurum
TwinFit
Implant library for exocad with TwinFit connection geometry for restoration design.
Culp
Culp-Young
Tooth anatomy library with young-arch morphology: pronounced cusps, mamelons, for exocad.
GLT
GLT 2
Tooth anatomy library, second morphological set of base shapes for exocad DentalCAD.
George
George Zacusai LUKAS
Tooth anatomy library with pronounced masculine morphology for crown modeling in exocad.
Pogarskiy
Pogarskiy Design 4.2
Tooth anatomy library for exocad: crowns, bridges, full-anatomy restorations, reference morphologies.
Pritidenta
priti_R
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-contour restorations.
psarris
psarris
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, restorations.
ZRS
zrs36 ua F26 + 09 up-L
Upper left first molar anatomy library for exocad, reference occlusal form.
Leone
Short 65
Short 6.5 mm titanium implant, internal hexagon, for exoplan, limited bone height.
SIN
EpikutGuide kit
Surgical kit library for designing guides and guided surgery protocols in exoplan.
Thommen Medical
kit
Surgical guide library for exoplan: sleeve/drill kit, fully guided and pilot drilling.
AB Dental
MU-P14C
Multi-Unit geometries for screw-retained restorations on P14C platform, exocad.
Adin
Ti-base Touareg-Unifit UF
Ti-Base geometry for Touareg-Unifit UF connection, implant crowns and bridges, exocad
BEGO
CADAbut 0 7 NH
Abutment library for exocad, designing implant-supported restorations on non-hex connection geometry.
BEGO
CADAbut 8 1 D
Abutment geometry library for designing restorations on 8.1 D platform in exocad
DIO
UF Sub DIgital ABT DLN 2555
Digital abutment library for UF Sub platform, designing implant-supported restorations in exocad.
DIO
UF Sub Hybrid Link UFHL 55501
exocad implant library with Link geometry for crowns, bridges, hybrid restorations on ti-base
DTLab
DTLab.1
Tooth anatomy library for exocad, reference shapes for modeling crowns and bridges
DTLab
DTLab.28
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, restorations.
PDL
PDL CatBack1 6.2
Reference tooth morphology library for crowns, bridges and full-anatomy restorations in exocad.
BEGO
PS CADCAM SCSCXRSRSXRI
Implant library for exocad DentalCAD, PS connection, CAD/CAM restoration geometries.
DIO
UF Sub Cemented ABT SSCA 55107
Cemented abutment geometry, UF Submerged platform, for exocad implant module.
DIO
UF Sub Cemented ABT SSCA 75307
Cementable abutment SSCA 75307 library, UF Submerged line, for exocad restorations.
ZRS
Anteriores-ZRS-F8
Anterior teeth anatomy library for exocad; reference for modeling crowns and bridges.
Lorant
Lorant Stumpf 01
Tooth anatomy library with reference morphology for modeling crowns and bridges in exocad.
PDL
PDL CatBack1 3.2
Tooth 3.2 reference anatomy, CatBack1 style, for crowns and restorations in exocad DentalCAD.
ZRS
ZRS 00
Tooth anatomy library for exocad: balanced morphology for crowns, bridges, restorations.
ZRS
zrs07
Anatomical tooth library for exocad: base morphology for crowns, bridges, full-anatomical restorations.
ZRS
zrs27 ua F17 + 04 up-L
Tooth anatomy set, upper F17 morphology, variant 04 left, reference for crowns and bridges in exocad.
ZRS
zrs48 ua M06 + 55 up-L
Anatomical tooth library, M06 morphology with shape 55, upper-left maxilla, exocad DentalCAD
SDS Swiss Dental Solutions
SDS20 sinus
Ceramic zirconia implant library for external sinus lift planning in exoplan.
BEGO
Conical TTiA NI SCRSX CC stock
exocad implant library: stock titanium base, conical connection, non-rotating configuration.
BEGO
Esthetic TTiA SCSCXRSRSXRI stock
Implant library for exocad DentalCAD, BEGO Esthetic interface, stock abutment restorations.
Other
AREUS
Anatomical tooth library with masculine morphology: crowns, bridges, full-anatomy restorations, exocad.
Ceramill
Ceramill Mindforms by AG
Tooth anatomy library for exocad: reference forms for crowns, bridges, restorations.
Expression
Expression D2
Reference tooth anatomy for designing crowns, bridges and restorations in exocad.
HZL
HZL 2
Tooth anatomy library for exocad DentalCAD: reference shapes for crowns, bridges, restorations.
Juan
Juan Carlos Palma HD
High-detail tooth anatomy library for exocad: precise morphology for crowns, bridges, full-anatomic restorations.
PDL
PDL CatBack1 5.4
Reference tooth anatomy for crowns, bridges and full-anatomy restorations in exocad.
VITA
vita2
Tooth anatomy library for exocad: crowns, bridges, full-anatomical restorations.
BEGO
CADAbut 8 1 F
Titanium base library for exocad, modeling implant-supported restorations with precise fit.
BEGO
CADAbut 8 1 NH
Abutment library for designing implant-supported restorations in exocad, non-engaging connection.
BEGO
Conical CADCAM SCXRSX CC
Implant library for exocad: conical connection, engaging SCX/RSX CC configuration.
DIO
UF Sub Cemented ABT SSCA 65105
Cementable abutment geometry, UF Submerged platform, for exocad crown and bridge design
DIO
UF Sub Cemented ABT SSCA 75107
Abutment geometry for cemented restorations, UF Submerged platform, exocad
DIO
UF Sub DIgital ABT DUN 3555
Digital abutment library, UF Submerged platform, for designing crowns and bridges in exocad.
DIO
UF Sub Digital ABT DMR 1540
Digital abutment library, UF Sub platform, DMR 1540 connection, for exocad DentalCAD.
DIO
UF Sub Digital ABT DPR 2570
Abutment library, UF Sub Digital interface, article DPR 2570, for exocad.
DIO
UF Sub Hybrid Link UFHL 55402
Hybrid Link geometry for implant-interface restorations in exocad DentalCAD.
Thommen
DyTi-Base PF 3 5 PEEK Captive Screw
PEEK Ti-Base geometry with captive screw, PF 3.5 platform, exocad.
Thommen
VARIOmulti Gen2 multiunit
Multi-Unit Gen2 component library for screw-retained bridges and bars, exocad.
DTLab
DTLab.24
Tooth anatomy library for exocad DentalCAD with consistent crown shapes for restorations.
Expression
Expression D3
Tooth anatomy library with reference morphologies for crowns, bridges, restorations in exocad DentalCAD.
GLT
GLT 1
Tooth anatomy library, reference morphologies for modeling crowns, bridges, restorations in exocad
Lorant
Lorant Stumpf 17
Upper left second premolar, reference master-tooth morphology for exocad DentalCAD.
Smeiga
Smeiga 12
Tooth anatomy library: morphologies for crowns, bridges and full-contour restorations in exocad.
Other
carlos
Tooth morphologies with distinct style, reference for crowns and restorations in exocad.
Zirkonzahn
zirkonzahnAIDA
Anatomical tooth library for exocad: crowns, bridges, restorations using AIDA morphology
ZRS
zrs17 ua F07 + 09 up-L
exocad anatomy library: form F07 plus occlusal morphology 09, upper left.
AB Dental
Pre-Milled Blanks
Pre-milled blank geometries for custom abutments and hybrid implant restorations in exocad.
Anthogyr
Anthogyr-Labside-Temp-Monobloc-SA
Temporary monoblock component geometry for provisional restorations on SA interface, exocad.
BEGO
CADBar 0 5
CADBar geometry library for designing implant-supported bar restorations in exocad.
DIO
UF Sub DIgital ABT DLN 4555
Abutment library for designing DIO implant-supported restorations in exocad.
DIO
UF Sub Hybrid Link UNHl 40553
Link geometry library for hybrid base on UF Submerged platform, exocad.
Implant Direct
Smart Base Engaging 6mm Modified4mm
Engaging SmartBase abutment library, 6mm modified to 4mm height, exocad.
Nucleoss
Angled TiBase Short Scanbody
Angled Ti-Base and short scanbody library for angled screw-channel restorations in exocad.
Other
Discovery
Tooth anatomy library with crown morphologies as reference shapes for exocad DentalCAD.
Marcelo
Marcelo Almeida MS1
Tooth anatomy library for exocad: natural morphology for crowns, bridges, full-contour restorations.
Smeiga
Smeiga 10
Tooth anatomy library for exocad DentalCAD: full-arch morphologies as reference for crowns and bridges.
VITA
VITA Physiodents-T6L
Tooth anatomy library, T6L shape with large morphology, reference for crowns, bridges, full-anatomic restorations, exocad DentalCAD.
psarris
psarris-elderly
Tooth anatomy library for exocad with aged morphology and functional wear.
Other
worn
Tooth anatomy library for exocad with naturally worn occlusal surfaces.
Zirkonzahn
zirkonzahnTHALIA
Anatomical reference tooth shapes for crowns, bridges and restorations, exocad
ZRS
zrs20 ua F10 + 04 up-L
Upper-left tooth anatomy library, F10+04 morphology, crown and restoration reference for exocad.
3DDX
fixation
Anchor pin library for surgical guide design in exoplan workflows.
AB Dental
I22 ScrewType
Screw-type implant library with dual thread for exoplan surgical planning.
AB Dental
I5 Conical
Implant library with conical hex connection for exoplan surgical planning
AB Dental
I55 Conical
Implant planning library for I55 Conical system, conical connection, exoplan
AB Dental
I6 Narrow
Narrow one-piece conical implant library with integrated abutment for exoplan
AB Dental
I6 NarrowIntegral
One-piece narrow implant for thin ridges, internal hex connection, exoplan
AB Dental
I6b One Piece Ball
One-piece implant with integrated ball attachment for overdentures, exoplan.
AB Dental
I7 Integral
Monoblock conical implant with integrated abutment for exoplan implant planning
AB Dental
Pilot sleeve
Pilot drill sleeve for exoplan surgical guides, guided pilot drilling.
AB Dental
TKD Guided kit
Guided surgery sleeve and instrument library for ABGuide protocol in exoplan.
AB Dental
fixation
exoplan library for fixation pins stabilizing surgical guides in guided surgery.
Alpha Dent
ImplantActive
Implant library with Morse taper conical connection for exoplan, Ti-base compatible.
Alpha Dent
Implant Active Bio
Conical implants library with internal hex connection for exoplan surgical planning.
Alpha Dent
ImplantClassic
Implant library with conical Morse taper connection for exoplan planning.
Alpha Dent
Implant Classic Konus
Implant library with conical Morse taper connection for exoplan planning.
Anker
kit
Surgical guide library for implant planning and template design in exoplan.
Anthogyr
AXIOM BL PX
Bone Level implants with conical internal connection for exoplan surgical planning
Anthogyr
AXIOM BL X3
Bone Level implant library with internal conical connection for exoplan
Anthogyr
Integral kit
Surgical sleeve and tool library for guided surgery in exoplan.
Argon
K3Pro Rapid
Surgical guide library for tapered self-tapping implants, exoplan planning
Argon
K3Pro Short
Short Platform implant library for surgical planning in exoplan, FDA marked
Argon
K3Pro Sure
Implant library with conical Morse taper connection for exoplan planning
Argon
Rapid Surgery kit
Surgical guide library for fully guided K3Pro Rapid implantation in exoplan.
Argon
Rapid Surgery sleeve
Sleeve library for surgical guide, K3Pro Rapid Surgery system, exoplan.
Arum Dentistry
NB2
Implant library with internal hex 11° taper connection for exoplan planning.
BioConcept
BC TissueLevel Standard
Tissue-level implants for single-stage surgical planning in exoplan.
Bioner
ShortDM
Short implants for atrophic posterior jaw, unified prosthetic platform, exoplan planning.
Bioner
kit
Surgical guide library with sleeves for guided implant placement in exoplan.
Bioner
sleeve
Guide sleeves for surgical template design in exoplan guided surgery workflow.
Bionnovation
BioDIRECT Classic
Bionnovation implant library for surgical planning in exoplan software.
Bionnovation
BioDIRECT Conic
Implant library with Morse taper conical connection for exoplan planning.
Bionnovation
BioDIRECT SWE
Implant library for surgical placement planning in exoplan.
Bionnovation
BioDIRECT XP
Bone-level implant library with external hex connection for exoplan planning.
Bionnovation
BioINTERNO Conic
Implant library with Morse taper conical connection for surgical planning in exoplan.
Bionnovation
BioINTERNO Medullary Conic
Implant library for exoplan planning with Morse conical connection interface.
Bionnovation
BioMORSE Conic
Implant library with Morse Taper conical connection for surgical planning in exoplan.
Bionnovation
BioMORSE EZ
Implant library with Morse taper conical connection for exoplan planning.
Bionnovation
BioMORSE SWE
Implant system library with Morse taper conical connection for exoplan planning.
Bionnovation
BioMORSE XP
Titanium implant library with Morse taper conical connection for exoplan planning.
Bionnovation
Classic
Implant library with internal hex connection for exoplan surgical planning.
Bionnovation
Conic
Implant library with conical Morse taper connection for exoplan planning.
Biotec BTK
BT Klassic External
BT Klassic implants with external hex connection for exoplan planning.
Biotec BTK
BT Klassic Internal
Surgical guide library for BT Klassic implants, internal hex connection, exoplan.
Biotec BTK
BT Nano
Library for planning BT Nano implants in exoplan.
Biotec BTK
BT Safe
BT Safe implants with Morse taper connection for exoplan surgical planning.
Biotec BTK
IS Kone Conical
Conical bone-level IS Kone implant library with Morse taper connection for exoplan
Biotec BTK
IS Kone External
Implant library with external hex connection for surgical planning in exoplan.
Biotec BTK
IS Kone Internal
Bone-level implants with internal hex connection for exoplan guided planning
Biotech Dental
AtlaSurgery kit
exoplan surgical guide library for guided implantation with master tube
Biotech Dental
AtlaSurgery2 kit
Guided surgery sleeves library for surgical template planning in exoplan.
Biotech Dental
Kontact MB GH28
Kontact line implant surgical planning library for exoplan software
Biotech Dental
Kontact PerioLevel
Tissue-level implant library with transgingival collar for exoplan planning.
Biotech Dental
Kontact Splus
Bone level Kontact S/S+ implants for surgical planning in exoplan.
Biotech Dental
WeegoFR
Implant library of WeegoFR line for surgical guide planning in exoplan.
Biotech Dental
fixation
Surgical guide fixation components for guided implant planning in exoplan.
Biotech Dental
sleeve
Sleeve library for surgical guide design in exoplan
Bredent
SKYplanX HB D1 kit
Surgical guide library for exoplan, HB D1 kit, guided implant placement in dense D1 bone.
Bredent
copaSKY UltraShort
Implant library for exoplan; short implants for low bone height, minimally invasive.
Bredent
copaSKY
Implant library, conical connection with internal hex, titanium, for exoplan planning.
Bredent
whiteSKY
Zirconia implants with Morse taper connection for exoplan implant planning.
BTI
Externa Tiny
Implant library with external connection, Externa Tiny platform, for exoplan planning.
BTI
Externa Universal
Externa implant planning library with conical connection for exoplan, FDA
Camlog
CERALOG Monobloc
Monobloc zirconia implant library with integrated abutment for exoplan planning.
Conexao
AR
Implant library for exoplan, conical connection with internal hex, titanium Grade 4
Conexao
Easy Grip Vulcano
Implant system library with internal hex connection for exoplan planning
Conexao
Flash Porous
Implant library with porous surface for digital planning in exoplan.
Conexao
Flash Vulcano
Implant library with conical Morse taper connection for planning in exoplan.
Conexao
Short Porous
Short titanium implant library, external hex connection, for limited bone volume, exoplan.
Conexao
SpeedGuide kit
Surgical guide library for exoplan, guided surgery with Stop Drill system.
Conexao
Torq
Torq implant library for exoplan planning, compatible with Ti-base abutments.
Cortex
CLASSIX Conical
Implant library with conical Morse connection for planning in exoplan.
Cortex
CLASSIX IntHex
Implant library for exoplan, internal hex, CLASSIX series, FDA version, implant planning.
Cortex
DYNAMIX Conical
Titanium implant library for exoplan; internal Morse taper conical connection, FDA-cleared.
Cortex
DYNAMIX IntHex
DYNAMIX implant library with internal hex connection for exoplan planning
Cortex
FullyGuided kit
Surgical guide library for exoplan, fully guided workflow with sleeves and stoppers.
Cortex
FullyGuided sleeve
Sleeve library for exoplan enabling fully guided implant placement and surgical guide design.
Cortex
MAGIX Conical
Conical implant library with Morse taper connection for exoplan planning.
Cortex
fixation
Surgical guide fixation components for digital planning and guide stabilization in exoplan.
Cowellmedi
INNO External
Implant library with external hex connection and SLA surface, for exoplan.
Cowellmedi
INNO InternalCuff18
Implant library for exoplan: no-mount 1.8 mm cuff, internal octa connection, SLA-SH surface.
Cowellmedi
INNO InternalCuff24
Implant library with internal hex, 2.4 mm cuff, for exoplan
Cowellmedi
INNO Narrow
Narrow submerged implant system library for exoplan; internal hex connection, Narrow components.
Cowellmedi
INNO Submerged
Submerged implant library, internal hex connection, for exoplan planning workflows.
Cowellmedi
INNO Submerged
Submerged fixture implant library for surgical placement planning in exoplan.
Cowellmedi
Innofit LodestarPlus kit
Surgical guide library for exoplan; guided implantation for INNO Submerged and Submerged Narrow.
Cowellmedi
fixation
Surgical guide library for exoplan: planning fixation components and guides.
Cowellmedi
sleeve
Surgical sleeve library for exoplan/Guide Creator, guided surgery, closed/guiding types.
C-Tech
C Guide sleeve
Guide sleeve library for guided surgery planning in exoplan; Narrow and Wide.
C-Tech
EstheticLine
Conical implant library for exoplan; Morse taper with internal hex, platform switching.
C-Tech
fixation
exoplan surgical guide library for designing guides with fixation pins, guided surgery.
Cybermed
Core1
Implant system library with internal taper connection and platform switching for exoplan.
Cybermed
fixation
Surgical guide and fixation pin library for planning in exoplan.
Cybermed
kit
Surgical sleeve, drill kit and anchor pin library for exoplan template design.
Cybermed
sleeve
Surgical sleeve library for designing surgical guides in exoplan Guide Creator.
Dental Tech
ImpLassic HX3
Implant library with internal hex connection for implant planning in exoplan.
Dental Tech
ImpLogic AT
Bone-level implant library for digital planning in exoplan.
Dentaurum
pOsition tioLogic kit
Surgical guide library for exoplan: guided system for tioLogic ST and TWINFIT implants.
Dentaurum
pOsition tioLogic sleeve
Surgical guide library for exoplan: sleeve-based guided implantation of tioLogic ST/TWINFIT implants.
Dentaurum
tioLogic ST
Implant library for implant planning in exoplan, tioLogic ST system.
Dentaurum
tioLogic
Titanium implant system library for implant planning and guided surgery in exoplan.
Dentegris
SLS Straight
Parallel-walled implants with internal hex and shared platform for exoplan planning.
Dentegris
ST
Implant library for exoplan planning; internal hex connection, titanium, four implants.
Dentegris
Soft Bone
Implant library for soft bone, internal hex connection, titanium, exoplan.
Dentis
SQGuide kit
Surgical guide template library for exoplan: SQ Implant guided placement using metal sleeve.
Dentis
SQGuide sleeve
Surgical guide library with sleeve for guided implant navigation in exoplan.
Dentis
Simple Guide Plus sleeve
Metal sleeve library for surgical guides, guided drilling planning in exoplan.
Dentis
fixation
Surgical guide fixation components for guided surgery planning in exoplan.
Dentis
sClean OneQSL
Implant library with internal hex connection, titanium, OneQ-SL system, for exoplan.
Dentis
sClean tapered II
Root-form endosseous implant library, internal hex connection, titanium, for exoplan
ETK
AestheticaPlus2
Transmucosal tissue-level implant library for one-stage protocol and posterior regions, exoplan.
ETK
FullyGuided kit
exoplan surgical guide library for fully guided implant placement, digital workflow.
ETK
Naturactis
Titanium implant library, conical Morse taper connection, for exoplan guided surgery.
ETK
Naturall
Implant library for implant planning in exoplan, French system.
ETK
Pilot kit
Surgical guide library for exoplan, pilot drilling protocol, guided implant surgery.
ETK
fixation
Fixation components library for surgical guide planning and placement in exoplan.
ETK
iBone E
Bone-level implant library for digital surgical planning in exoplan.
ETK
iBone G
Tissue-level implant library, internal hex connection, for exoplan planning.
ETK
iBone S
Bone-level implant for exoplan, designed for at-risk patients and resorbed ridges.
ETK
sleeve
Sleeve library for surgical guides, guided implant surgery in exoplan.
FGM
ArcSys Regular Short kit
Surgical guide library for exoplan; guided placement of Regular short implants.
FGM
ArcSys Small kit
Surgical guide library for exoplan, guided implant placement with Arcsys Guided Surgery.
FGM
Arcsys
Implant system library for planning Arcsys guided surgery in exoplan.
FGM
sleeve
Surgical sleeves for guide design in exoplan, directing instruments along implant plan.
GC
Aadva Tapered
Titanium implant library with internal hex connection for surgical guide planning in exoplan.
GC
GENESiOPlus Straight
Titanium implant library for exoplan, internal Morse taper connection, digital planning.
GC
SETiOPlus Straight
Implant library for digital planning in exoplan, conical Morse taper connection, titanium.
Global D
EVL K
Root-form implant library for exoplan, high primary stability in soft bone.
Global D
EVL S
Implant library for exoplan planning: cylindrical system, supracrestal positioning, smooth neck
Global D
Implant30
Implant library, conical Morse taper connection, narrow platform, exoplan planning
Global D
InKone Universal
Titanium implant library with internal conical Morse taper connection for exoplan.
Global D
InKone WD
Wide-platform implant library, conical Morse taper connection, planning in exoplan.
Global D
Pilot kit
Surgical guide library for pilot guided drilling and fixation pins, exoplan.
Global D
Ultimate kit
Surgical guide library for exoplan, ULTIMATE protocol, guided kits G42/G52.
Global D
fixation
Surgical guide fixation library for exoplan, digital planning and guided surgery.
Global D
twinKon 4
Ultra-short titanium implants, internal hex connection, for planning in exoplan.
Global D
twinKon
Tissue-level implant, concave neck, Morse taper connection; planning in exoplan.
GMI
avantgard Peak
Implant library with Morse taper conical connection for exoplan planning
GMI
avantgard
Implant geometries for guided implant planning in exoplan, officially verified library.
GMI
frontier Peak
Implant library with internal hex connection for surgical planning in exoplan.
GMI
frontier
Dental implant library with internal hex connection, Grade IV titanium, for exoplan.
GMI
frontier
Implant library with internal hex connection for exoplan planning, FDA-cleared.
GMI
phoenix Hex24
Implant system library for digital planning in exoplan, internal hex 2.4 mm connection.
GMI
phoenix Hex27
Implant library for exoplan planning, internal hex Hex27 connection, 2.7 mm platform
GMI
phoenix Hex34
Implant library with internal hex connection for implant planning in exoplan
HI-TEC
Guided Pilot kit
Surgical guide library for exoplan, pilot-guided protocol for guided implant placement.
HI-TEC
Logic
Self-tapping bone-condensing implant with scan body for digital planning in exoplan.
HI-TEC
LogicPlus
Implant library for surgical placement planning in exoplan, FDA-cleared.
HI-TEC
Smart Surgical kit
Surgical kit library for exoplan: implant planning and guided surgery template design.
HI-TEC
Tapered Self Thread
Tapered self-threading implant library, internal hex connection, for exoplan planning
HI-TEC
Vision
Implant library with conical Morse taper connection, titanium, for exoplan.
HI-TEC
fixation
Surgical guide library for digital planning and guide design in exoplan.
HI-TEC
sleeve
Surgical sleeves for guided surgery template design in exoplan.
IBS
Implant MagiCore MagicCuff4
Implant library for planning in exoplan, MagiCore MagicCuff4 connection platform.
IBS
Implant MagiCore MagicCuff5
Implant library for CAD planning in exoplan, MagiCore connection system.
IBS
Implant MagiCore MagicCuff5
Implant surgical planning library for exoplan, supports prosthetic restorations, FDA-marked.
IBS
Implant Magic FC Mini
Magic FC Mini implant library for digital planning in exoplan.
IBS
Implant Magic FC RBM
Magic FC series implant library, RBM surface, for planning in exoplan.
IBS
Implant Magic FC SLA
Implant library for planning and component selection in exoplan; FDA-registered series.
IDI
fixation
Surgical guide library with fixation for exoplan, planning and designing guides.
IDI
sleeve
Surgical sleeves for IDGuide guided surgery and surgical guide planning in exoplan.
Implacil
ImplaGuide kit
Surgical guide library for guided implant placement, compatible with exoplan.
Implacil
Maestro CM
Implant library with internal Morse taper conical connection, titanium, exoplan.
Implacil
Tapered HE
Tapered implant library with External Hex (HE) connection for exoplan, FDA-marked.
Implacil
Tapered HI
Tapered implant library, internal hex connection, titanium, for exoplan planning.
Implacil
Tapered MorseTaper AR
Tapered implant library with Morse Taper connection for exoplan planning
Implacil
sleeve
Surgical guide sleeves for designing drill templates in exoplan.
Implance
BoneLevel
Bone-level implant library, conical connection, titanium Grade 5, for exoplan planning.
Implance
TissueLevel
Tissue-level implant library, Morse taper conical connection, for planning in exoplan
Implance
kit
Surgical kit library for designing surgical guides in exoplan.
Implance
sleeve
Surgical sleeve library for planning guided drilling elements in exoplan.
Implantswiss
BoneLevel
Bone level implant library for digital implant planning in exoplan.
Implantswiss
BoneLevel
Bone level implant library, conical connection, titanium, for exoplan planning.
Implantswiss
fixation
Fixation pin library for designing surgical guides in exoplan.
Implantswiss
sleeve
Sleeves for exoplan surgical guides, guiding drills during guided implant surgery.
Intra-Lock
Fusion
Bone level implant library, conical connection with platform switching, for exoplan
Intra-Lock
MDL MiniDrive Lock
Small-diameter implant library, internal hex connection, titanium, for exoplan.
Intra-Lock
MILO WP
Titanium implant library, wide pitch, internal hexagon connection, for exoplan planning, FDA.
Intra-Lock
One Piece OP
One-piece single-stage implant library for surgical planning in exoplan, FDA-cleared.
Intra-Lock
fixation
Surgical guide library, internal hex connection, guided surgery planning in exoplan.
Intra-Lock
sleeve
Surgical sleeve library for guided surgery template design in exoplan.
INTRAOSS
Titaoss Max CMD Advanced
Implant library for exoplan, CMD connection, supporting guided pilot workflow.
J Dental Care
JDEvolution
Two-component implant system library for guided surgery planning in exoplan.
J Dental Care
JDEvolutionPlus
Bone level implant library, internal hex connection, for exoplan planning
J Dental Care
JDEvolutionS
Two-component implant library for narrow gaps and thin ridges, for exoplan planning.
J Dental Care
JDEvolutionSLA
Implant library with SLA surface, FDA version, for planning in exoplan.
J Dental Care
JDIcon
Implant library with internal conical connection for planning in exoplan.
J Dental Care
fixation
Surgical guide library with fixation components for guided surgery in exoplan.
J Dental Care
kit
Surgical guide library for exoplan based on computer-guided surgery kit.
J Dental Care
sleeve
Surgical sleeve library for exoplan, guided surgery template design.
Keystone
Paltop FullyGuided kit
Surgical guide library for exoplan enabling fully guided implant placement.
Keystone
Paltop Pilot kit
exoplan library: pilot surgical guide for guided pilot drilling and planning.
Keystone
Paltop fixation
Surgical guide library for exoplan supporting fixation pins in guided surgery.
Keystone
Paltop sleeve
Surgical guide sleeves for exoplan, fully guided implant placement, Paltop system.
Keystone
Paltop Advanced Plus
Implant library, conical connection with internal hex, titanium Grade 5, for exoplan
Keystone
PaltopDIVA
Implant library for implant planning and surgical guides in exoplan.
Keystone
PaltopDynamic
Implant planning library for exoplan, internal hex, titanium, FDA-cleared, guided sleeves
Keystone
PaltopPAI
Implant library with internal hex connection for digital planning in exoplan.
Keystone
PaltopPAI
Implant library with conical Morse taper connection for exoplan planning.
Keystone
PaltopPCA
Implants with internal conical Morse taper connection for digital planning in exoplan.
Keystone
PrimaPlus kit
Surgical guide library, Morse taper conical connection, implant planning in exoplan
Keystone
fixation
Fixation pin components for surgical guides, guided surgery, exoplan planning.
Keystone
sleeve
Surgical sleeve library for designing guided implant drilling templates in exoplan.
Klockner
ESSENTIAL CONE
Soft tissue level implant library, Morse taper conical connection, guided planning in exoplan.
Klockner
KL
Implant system library for exoplan; conical connection with internal hexagon, universal implant.
Klockner
Sniper fixation
Surgical guide fixation pin for exoplan, SNIPER Guide System.
Klockner
Sniper kit
Surgical guide library for exoplan; fully guided surgery, sleeve or sleeveless design.
Klockner
Sniper sleeve
Surgical sleeve library for fully guided Sniper implant planning in exoplan.
Klockner
VEGAPlus
Planning library for conical self-tapping bone-level implant, Morse taper connection, for exoplan.
Klockner
fixation
Surgical guide library for exoplan; fixation solutions for implant and prosthetic protocols.
Klockner
sleeve
Sleeve library for exoplan, designing guided surgical templates in implant surgery.
Lasak
BioniQ Straight
Straight cylindrical self-tapping implants, internal hexagon connection, titanium Grade 4, for exoplan.
Lasak
FullyGuided kit
Surgical guide sleeve library for fully guided BioniQ placement in exoplan.
Lasak
PilotGuided kit
Surgical guide library for pilot drilling, conical Morse taper connection, exoplan.
Lasak
sleeve
Titanium guide sleeves for surgical templates, guided implant placement in exoplan.
Leone
MaxStability
Implant library with Morse taper conical connection for exoplan planning
medentis
ICX Premium TL mini
Tissue Level implant library with mini platform for exoplan planning.
medentis
ICX Premium TL plus
Implant library for exoplan, internal hex connection, titanium Grade 5, digital planning.
medical-instinct
Bone Trust Plus Hex
Implant planning library for exoplan, internal hex connection, titanium/Ti-Zr, FDA-marked.
Noris Medical
Mono
One-piece tissue-level implant library with integrated abutment for exoplan
Noris Medical
Mono
One-piece implants with integrated abutment, Morse taper conical connection, for exoplan
Noris Medical
Onyx
Bone-level implant library, internal hex connection, titanium, for exoplan planning
Noris Medical
Onyx
Onyx implant system library for implant planning and surgical guides in exoplan.
Noris Medical
Tuff Machined Neck
Bone level implant library with machined neck, internal hex, for exoplan.
Noris Medical
Tuff Machined Neck
Bone level implant library with machined neck, Internal Hex connection, for exoplan.
Noris Medical
Tuff Pro
Bone-level implant library with internal hex connection for exoplan planning.
Noris Medical
Tuff Pro
Classic-series bone-level implant library for exoplan planning, tapered body, FDA-marked.
Noris Medical
Tuff TT
Bone-level tapered implant library with double threads and flutes for exoplan.
Noris Medical
Tuff TT
Planning library of bone level implants with internal hex for exoplan.
Noris Medical
Tuff
Bone-level implant with conical body and Morse taper connection for exoplan.
Nucleoss
T6 Standard
Bone level implant library, conical Morse taper connection, titanium, for exoplan, FDA.
Nucleoss
kit
Surgical kit library for digital guided surgery planning in exoplan.
Nucleoss
sleeve
Surgical guide sleeves for template design and digital implant planning in exoplan.
NUVO
ExternalFIT
Implant library for exoplan: Brånemark external hex connection, conical body.
Oxy Implant
Fixo Long 30
Implant library with 30° angled connection for surgical planning in exoplan.
Oxy Implant
PSK Micro Narrow
Two-stage implant library, conical Morse taper connection, Mini platform, for exoplan.
Oxy Implant
PSK Micro
Implant library for digital implant planning in exoplan, Micro platform.
Oxy Implant
PSK Normo
Implant library, PSK Normo platform, for digital implant planning in exoplan.
Oxy Implant
Piesse INT PS Normo
Implant library with internal connection, PS Normo platform, for digital planning in exoplan.
Ritter
NL QSI
Implant library with internal hexagon connection for exoplan digital planning; FDA.
Ritter
QSI
Implant library with Morse taper conical connection for exoplan planning.
Ritter
SNAP
SNAP implant library for digital planning in exoplan, FDA-cleared.
Schuetz
IMPLA Cylindrical ConeCon
Cylindrical implant library, conical connection, self-tapping thread, platform switching, exoplan planning
Schuetz
IMPLA Cylindrical HexCon
Cylindrical implants, external HexCon hex connection, self-tapping thread, platform switching, for exoplan.
Schuetz
IMPLA MicroRetention ConeCon
Implant library with ConeCon conical connection for exoplan planning.
Schuetz
IMPLA MicroRetention HexCon
Titanium microthread implant library, internal hex connection, platform switching, for exoplan.
Schütz Dental
Impla kit
Surgical guide library for IMPLA implant system, digital planning in exoplan.
Schütz Dental
sleeve
Metal guide sleeves for surgical templates; digital planning and design in exoplan.
SDS Swiss Dental Solutions
SDS11 balcony
Ceramic implant library for exoplan, enhanced emergence profile for premolars and molars
SDS Swiss Dental Solutions
SDS11 oval
Zirconia implants, conical Morse taper connection, oval platform for premolars/molars in exoplan.
SDS Swiss Dental Solutions
SDS11 standard
Zirconia implant library, SDS11 standard platform, for surgical planning in exoplan.
SDS Swiss Dental Solutions
SDS12 balcony
Implant library for exoplan planning, Balcony series, premolar and molar regions.
SDS Swiss Dental Solutions
SDS12 standard
Implant library for exoplan, conical connection; 12 implants, 10 original sleeves.
SDS Swiss Dental Solutions
SDS12 standard
Zirconia implant library, SDS12 line, conical Dynamic Thread® connection, for exoplan planning
SDS Swiss Dental Solutions
SDS20 balcony
Implant library for exoplan, enhanced emergence profile, targeting premolars and molars.
SDS Swiss Dental Solutions
SDS20 oval
Ceramic zirconia oval-series implants for premolar and molar planning in exoplan.
SDS Swiss Dental Solutions
SDS20 standard
Implant library, SDS 2.2 standard platform, for digital implant planning in exoplan.
SDS Swiss Dental Solutions
SDS21
Ceramic zirconia implant library, one- and two-piece solutions, for exoplan planning.
SDS Swiss Dental Solutions
SDS22 balcony
Zirconia balcony-form implant library for planning cases in exoplan.
SDS Swiss Dental Solutions
SDS22 oval
SDS 2.2 oval implant library for exoplan planning, internal hex, titanium Grade 4, FDA-cleared.
SDS Swiss Dental Solutions
SDS22 short
Short implant library, SDS 2.0 line, for planning in exoplan.
SDS Swiss Dental Solutions
SDS22 sinus
Zirconia implant library for digital sinus-form implant planning in exoplan.
SDS Swiss Dental Solutions
SDS22 standard
Zirconia ceramic implant system library for surgical planning in exoplan.
SDS Swiss Dental Solutions
SDS22 standard
SDS 2.2 standard implant library for planning in exoplan, FDA-cleared.
SGS
Dental P1
Implant library for exoplan planning, internal hex with Morse taper connection, FDA-marked.
SGS
Dental P1D
Two-stage implant system library for surgical planning in exoplan.
SGS
Dental P5D
Implant library with conical Morse taper platform for planning in exoplan.
SGS
Dental P5D
Implant library, P5D platform, digital implant planning in exoplan, FDA-cleared.
SGS
Dental P5G
Tissue-level implant library with conical Morse taper platform for exoplan.
SGS
Dental P7
Implant planning library for exoplan, P7 series, fully guided workflow.
SGS
Dental P7
Implant library, P7 line, for digital implant planning in exoplan, FDA-marked.
SGS
Dental P7D
Implant library with conical Morse taper connection for exoplan planning.
SGS
Dental P7N
Narrow conical implant library with Internal Hex connection for exoplan planning.
SGS
Dental SKG kit
Surgical guide library for exoplan: sleeves, drill kit, anchor pins for implant planning.
SGS
Dental sleeve
Surgical sleeve library for designing guided surgery templates in exoplan.
Shinhung
Luna
Implant system library with internal hex connection, titanium, for exoplan planning.
Shinhung
fixation
Surgical guide fixation components for exoplan, planning and guided surgery preparation
Shinhung
kit
Surgical guide library for exoplan with guided instrument kit, digital implant planning.
Shinhung
sleeve
Sleeve library for designing guided surgery drill templates in exoplan.
SIC
Long Guided Surgery kit
Surgical guide library for exoplan, sleeve system, guided implant placement workflow
SIC
SICace
Implant library, internal hex connection, for exoplan; fully guided and pilot.
SIC
SICace
Titanium implant library with internal hex connection for exoplan planning, FDA version
SIC
SICmax onepiece
One-piece implant library for planning and surgical guides in exoplan.
SIC
SICmax
Implant library with internal conical hexagon connection for exoplan planning.
SIC
SICmax
Titanium implant library, internal hex connection, implant planning in exoplan, FDA-cleared.
SIC
SICtapered
Tapered-body titanium implants, Internal Hex connection, high stability, for exoplan.
SIC
SICvantage max
Implant library for exoplan planning; conical Morse taper connection, internal hex, titanium.
SIC
SICvantage tapered
Tapered implant library, Swiss Cross connection with 4 grooves, for exoplan.
SIC
SICwhite
Implant library for exoplan: two-piece zirconia ceramic system, Variosoft conical connection.
SIC
Short Guided Surgery kit
Surgical kit library for planning guided implant surgical templates in exoplan.
SIC
sleeve
Sleeves for surgical guides, guided implant placement, Guided Surgery system, exoplan.
SIN
Epikut CM115
Titanium implant library with conical Morse taper connection for exoplan planning.
SIN
Epikut HE
Implant library for exoplan, external hex connection, guided surgery planning.
Southern Implants
Ext Hex Cylindrical Int Drive
Cylindrical External Hex implants with internal drive for exoplan planning.
Southern Implants
Ext Hex Tapered
Tapered implant library with external hex connection for exoplan planning.
Southern Implants
ITCylindrical
Cylindrical tissue level implants with internal connection, FDA-marked, for exoplan.
Southern Implants
ITMax
Tissue-level implant library, internal hex, immediate molar replacement, titanium, for exoplan.
Southern Implants
Int Hex Tapered
Tapered implant library with internal hex connection for exoplan planning.
Southern Implants
ProvataTapered
Tapered implants with internal hex, Co-Axis and MSC variants, FDA-marked, for exoplan
Southern Implants
Tri NexCylindrical
Cylindrical implant library for exoplan, trilobe connection with internal hexagon, FDA-marked.
Steco
StecoGuide Compatible Camlog sleeve
Titanium guide sleeves for exoplan surgical templates, CAMLOG Guide System compatible
Steco
StecoGuide Compatible CeHa sleeve
Surgical sleeve library for guided surgery template design in exoplan.
Steco
StecoGuide Compatible Thommen sleeve
Guided surgical sleeve library for exoplan, compatible with Thommen Medical implants.
Steco
StecoGuide Universal sleeve
Universal guide sleeves for surgical templates, double sleeve system, exoplan.
Sterngold
PUR
Bone-level implant library with internal hex connection for exoplan planning.
Sterngold
kit
Guided surgery template components for implant planning and guide fabrication in exoplan.
Sterngold
sleeve
Surgical sleeves for guided implant surgery templates, TRU and PUR systems, exoplan.
Sweden Martina
CSR
Implant system library with conical DAT connection for exoplan planning
Sweden Martina
Echoplan Pro E kit
Surgical guide library for exoplan: guided implant bed preparation, Outlink2 platform
Sweden Martina
Global
Implant library for exoplan, double internal octagon connection, conical body.
Sweden Martina
Outlink2 SLIM
Narrow implant library, conical connection with internal hex, for exoplan.
Sweden Martina
Prama RF LongNeck
Implant library with 3.80 mm long neck, Collex internal hex, for exoplan.
Sweden Martina
Prama RF ShortNeck
Implant library, conical endosseous body, short convergent neck, Morse taper connection, exoplan
Sweden Martina
Premium TG
Transgingival cylindrical implant library, internal hex connection, titanium, for exoplan, FDA.
Sweden Martina
Shelta SL
Implant library for exoplan, Morse taper conical connection with internal hexagon, titanium.
Sweden Martina
Shelta
Conical implant library, internal hex connection, ZirTi surface, for exoplan.
Sweden Martina
Syra Magnum
Implant library with reinforced internal hex connection for exoplan planning
Sweden Martina
Syra SL machined
Implant library with Morse taper conical connection, titanium Grade 5, for exoplan.
Sweden Martina
Syra Short
Short titanium implant library, conical Morse taper connection, for exoplan.
Sweden Martina
Syra machined
Titanium implant library, conical geometry, external hex, machined surface, for exoplan
TAG
Dental Axis
Implant system library for implant planning and placement in exoplan.
TAG
Dental Guide sleeve
Surgical sleeve library for designing guided templates in exoplan/Guide Creator.
TAG
Dental Guided Axis kit
Surgical guide library for planning guided implant surgery in exoplan.
TAG
Dental Massif
Implant library for digital implant planning in exoplan; FDA cleared.
TAG
Dental fixation
Fixation anchor pins library for surgical guide design in exoplan.
TBR
Baby8
Short cylindrical titanium implant with internal octagonal Octalink connection for exoplan.
TBR
BabyM
Implant system library for digital implant planning in exoplan.
TBR
Connect
Implant library with internal hex connection, titanium, for exoplan planning.
TBR
M
Titanium implant library with Morse taper conical connection for exoplan.
TBR
Z1 Connect
Tissue-level implant library with zirconia neck, external hexagon connection, for exoplan.
TBR
Z1 Infinity
Surgical guide library for planning tissue-level implant placement in exoplan.
TBR
Z1 M
Tissue-level implant library with zirconia neck, internal hexagon connection, for exoplan.
TBR
fixation
Surgical guide fixation elements for exoplan, digital guided surgery planning.
TBR
infinity
Titanium implant library with conical Morse taper connection for exoplan planning
Thommen Medical
CONTACT MC INC
Implant library, internal MC hexagon connection, for exoplan planning, FDA‑marked US.
Thommen Medical
CONTACT RC INC
Implant library with conical Morse connection, RC platform, for exoplan planning.
Thommen Medical
ELEMENT LC INC
Cylindrical implant library, internal conical LC connection, for exoplan planning.
Thommen Medical
ELEMENT RC INC
Cylindrical implant library, Internal Hex connection, RC platform, for exoplan.
Thommen Medical
sleeve
Guide sleeve library for exoplan; guided surgery planning, VECTOdrill Pilot Drill.
Ticare
Fidelis fixation
Surgical guide library for exoplan; guided surgery planning with fixation pins.
Ticare
Fidelis kit
Guided surgery template library for implant placement, sleeve kit, exoplan.
Ticare
Fidelis sleeve
exoplan surgical guide library, Fidelis guide sleeves for guided surgery system
Ticare
InHex Quattro
Implant planning library for exoplan; 11° conical connection with double hexagon.
Ticare
InHex
Implant library with conical connection and double internal hexagon for exoplan.
Ticare
Osseous Quattro
Self-tapping implants with external hex connection for exoplan surgical planning.
Ticare
Osseous
Implant library with internal hex connection, titanium, for guided surgery in exoplan.
TRATE
Rootform
Library of root-form two-piece screw implants, internal hex, for exoplan planning.
TRI
Dental TRI Narrow
Bone-level implant library, internal Morse taper conical connection, for exoplan
TRI
Dental TRI Narrow
Narrow bone-level titanium implants, internal hex, for tight ridges, exoplan.
TRI
Dental TRI Octa
Implant system library with internal octagonal Octa connection for exoplan.
TRI
Dental TRI Vent
Bone-level implant library with conical Morse taper connection for exoplan.
TRI
Dental TRX fixation
Fixation pins for surgical guides, planning and guide design in exoplan.
TRI
Dental TRX kit
Surgical guide library for exoplan, TRX workflow, sleeve and sleeveless options.
TRI
Dental TRX sleeve
Sleeve library for exoplan surgical guides; supports sleeve and sleeveless guide design.
TRI
Dental kit
Surgical guide library for exoplan, planning guided implant placement with system sleeves.
TRI
Dental matrix BL P37
Bone-Level implant library with internal connection for guided planning in exoplan.
TRI
Dental matrix BL P45
Implant system library, BL P45 platform, for implant planning in exoplan
TRI
Dental matrix TL P37
Tissue-level implant library with three-channel connection for exoplan planning.
TRI
Dental matrix TL P37
Tissue-Level implant library, P37 platform, FDA-cleared, DC-compatible, for exoplan planning
TRI
Dental matrix TL P45
Tissue-level implant library, 4.5 platform, for exoplan surgical planning
TRI
Dental matrix TL P45
Implant library, Tissue-Level P45 platform, internal hexagon connection, titanium, for exoplan planning.
TRI
Dental sleeve
Surgical guide sleeve library for designing guided implant templates in exoplan.
WEGO
WEGO
Implant library with internal hex connection for digital planning in exoplan.
Zeramex
ZeramexXT
Two-piece ATZ ceramic implant library, conical zirconia Vario-Abutment connection, for exoplan.
Z-Systems
Z5 BL
Bone-level zirconia implant library for digital treatment planning in exoplan.
Z-Systems
Z5 TL
Library of one-piece ceramic ZrO₂ implants with integrated abutment for exoplan.
Z-Systems
Z5c
Ceramic zirconia dental implant library for surgical planning in exoplan, FDA-cleared.
Z-Systems
Z5mt
Zirconia implant library, conical Morse taper connection, for exoplan planning.
3DIEMME
3DIEMME
Implant components for planning and guided surgery workflows in RealGUIDE.
AB Dent
AB Dent
Implant components for RealGUIDE: digital planning and guided surgery workflows.
AB Dental
AB Dental
Implant library for RealGUIDE: planning, positioning and guided surgery with templates.
Alpha Dent
Alpha Dent
Implant library with Morse taper conical connection for guided surgery planning in RealGUIDE
Argon
Argon
Component library for digital implant planning and K3Pro guided surgery in RealGUIDE.
AVINENT
AVINENT
Components for planning dental implants and surgical guides in RealGUIDE.
BB Dental
BB Dental
Multisystem implant library for RealGUIDE: planning and guided surgery; SLIM, 3P, EV connections.
Biomax
Biomax
Implant components for digital planning and guided surgery in RealGUIDE, NobelActive-compatible.
Bioner
Bioner
Implant components for RealGUIDE: digital implant planning and surgical guide design
Bionnovation
Bionnovation
Implant library for guided surgery planning in RealGUIDE.
BTK
BTK
Implant library for RealGUIDE: digital planning and surgical guide preparation in guided surgery.
BT Lock
BT Lock
Implants with patented internal hex connection for guided surgery planning in RealGUIDE.
Champions
Champions
Implant and abutment components for digital implant planning in RealGUIDE.
Cowellmedi
Cowellmedi
Implant library, internal/external hex and conical connections, titanium, for RealGUIDE, planning and guided surgery
C-Tech Implant
C-Tech Implant
Implant system components with Morse taper conical connection for RealGUIDE planning
Dental Tech
Dental Tech
Implant components for RealGUIDE: placement planning and guided surgery workflow.
ETK
ETK
Implant planning and guided surgery components for RealGUIDE workflows.
GC
GC
Implant planning components, internal hex connection, guided surgery workflow in RealGUIDE.
Global D
Global D
Titanium implants with conical Morse taper connection for planning and guided surgery in RealGUIDE
GMI
GMI
Implant systems for digital implant planning and surgical guide fabrication in RealGUIDE
HI-TEC IMPLANTS
HI-TEC IMPLANTS
Implant system components for guided implant surgery planning in RealGUIDE.
IDI Evolution
IDI Evolution
Components for guided surgery planning, titanium implants, conical Morse taper connection, RealGUIDE.
Impladent
Impladent
Surgical guide library for implant planning in RealGUIDE.
Intra-Lock
Intra-Lock
Implant library with internal hex connection for guided surgery planning in RealGUIDE.
Intra Lock System Europa
Intra Lock System Europa
STL component library for implant planning and surgical guides in RealGUIDE.
i Physio
i Physio
Gingiva formers for RealGUIDE; shape soft tissue, compatible implant connections.
ISOMED
ISOMED
Dental implant components for digital planning and guided surgery in RealGUIDE.
Izenimplant
Izenimplant
Titanium implants and abutments, conical internal-hex connection, for RealGUIDE guided surgery.
J Dental Care
J Dental Care
Implants and components for guided surgery planning and surgical guides in RealGUIDE.
Leader Medica
Leader Medica
Implant components for guided surgery planning in RealGUIDE.
medentis
medentis
ICX component library with conical connection for implant planning in RealGUIDE.
myplant
myplant
Implant components for digital guided implant surgery planning in RealGUIDE.
NEW ANCORVIS
NEW ANCORVIS
Implant and abutment components for planning and guided surgery in RealGUIDE.
Noris Medical
Noris Medical
Digital models for implant planning and surgical guide preparation in RealGUIDE.
Oxy Implant
Oxy Implant
Implant system components for digital planning and guided surgery in RealGUIDE.
Paltop Dental
Paltop Dental
Implant library with internal hex connection for planning and guided surgery in RealGUIDE
Phibo
Phibo
Implant system components for RealGUIDE: digital planning and guided surgery
PSM Medical
PSM Medical
Orthodontic mini-implant (TAD) library for digital planning and guided surgery in RealGUIDE.
Rex Implants
Rex Implants
Component library for RealGUIDE: planning wedge-shaped PiezoImplant System implants and rexpanders.
Ritter Implants
Ritter Implants
Digital implant system components for guided surgery planning in RealGUIDE.
Schutz Dental
Schutz Dental
Implant components with internal hexagon for guided surgery planning in RealGUIDE.
SGS Dental
SGS Dental
Digital implant library for guided surgery planning in RealGUIDE.
Shinhung
Shinhung
Implant library for treatment planning and guided surgery in RealGUIDE.
SIC invent AG
SIC invent AG
Implant library for guided surgery planning in RealGUIDE, titanium, various connections.
Sterngold Dental
Sterngold Dental
Implant components with conical connection for surgical guides and planning in RealGUIDE.
TAG Dental
TAG Dental
Library components for guided surgery in RealGUIDE, internal hex connection, titanium Grade 5
TBR
TBR
Implant component library for digital planning and guided surgery in RealGUIDE.
Ticare
Ticare
Implant component library for guided surgery planning in RealGUIDE.
Titanium Component
Titanium Component
Library components for guided implant surgery planning in RealGUIDE software.
TRI Dental Implants
TRI Dental Implants
Implant library components for RealGUIDE: implant planning and guided surgery, matrix and Performance lines.
Warantec
Warantec
Implant library for RealGUIDE positioning planning and guided surgery workflows
Ziacom
Ziacom
Digital implant models for implant planning and surgical guide design in RealGUIDE.
HUGE
HUGE
Two-layer PMMA artificial teeth library for full, partial and implant-supported dentures in exocad.
New Stetic
New Stetic
Acrylic teeth library for removable and full dentures, exocad Full Denture.
Anthogyr
Anthogyr-Labside-HealFit-SH-TL
Tissue-level HealFit SH geometries aligning restorations to implants in exocad.
BEGO
CADBar 0 3 AN
CADBar library with AN geometry for designing implant-supported restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 65504
Abutment library for cemented restorations on UF Submerged platform, exocad.
DIO
UF Sub Digital ABT DMR 4555
Abutment library, size DMR 4555, UF Submerged system, for exocad.
AIDA
AIDA
Tooth anatomy morphology library: reference shapes for crowns, bridges, full-contour restorations in exocad DentalCAD.
Other
Defiant
Tooth anatomy library with expressive crown morphology for exocad restorative modeling.
Other
FEDERICA
Tooth anatomy library: reference morphology for crowns, bridges, full-anatomical restorations, exocad.
FOBOS
FOBOS-Proteus
Tooth anatomy library with reference morphologies for modeling crowns and bridges in exocad.
Jan
Jan Hajto M2
Tooth anatomy library with reference forms for modeling crowns and restorations in exocad.
Other
MM3.0
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-contour restorations
PDL
PDL CatBack1 1.2
Tooth anatomy library with natural morphology for crowns, bridges and full-contour restorations in exocad.
PDL
PDL CatBack1 4.1
Reference tooth 4.1 anatomy, CatBack1 style, for crowns and bridges, exocad.
Peak
Peak Point - Oval
Oval-shaped tooth anatomy library, reference for crowns and bridges in exocad.
Pogarskiy
Pogarskiy Design 4.1
Tooth anatomy library for exocad: reference shapes for crowns, bridges, full-anatomy restorations.
psarris
Psarris - Elderly
Tooth anatomy library with age-related morphology for crown modeling in exocad.
Smeiga
Smeiga 02
Tooth anatomy library for exocad with crown, bridge and full-anatomy morphologies
Other
UnCapped
Tooth anatomy library for designing crowns, bridges and full-contour restorations in exocad.
AB Dental
MU-P14
Multi-Unit P14 abutment library for designing screw-retained crowns in exocad.
BEGO
CADBar 3 3
Implant library with platform geometry for designing implant-supported restorations in exocad.
BEGO
PS TiB NH SCSCXRSRSXRI
Ti-base library without hexagon for crown and bridge modeling in exocad DentalCAD.
Cowellmedi
Sub N CMT S06 conid
Sub N CMT S06 conid connection geometry for implant restorations in exocad.
Cowellmedi
Sub RN MU Ti 45
Angled 45° Multi-Unit titanium interface geometry, Submerged Regular Narrow platform, exocad.
Cowellmedi
Sub R MU DA 55
Multi-Unit component for screw-retained restorations on 55° angled abutments in exocad.
DIO
UF Sub Cemented ABT SSCA 65107
Cementable UF Submerged abutment, article SSCA 65107, for exocad restoration design.
DIO
UF Sub Digital ABT DMR 1555
Abutment library for UF Submerged platform, superstructure modeling in exocad.
DIO
UF Sub Digital ABT DPR 4555
Abutment library for exocad with UF Submerged connection, DPR 4555 platform.
DIO
UF Sub Hybrid Link UFHL 45503
Link library for exocad: crowns, bridges, hybrid restorations on titanium base.
Other
U1 F13
Tooth anatomy library for exocad: reference morphology for crowns, bridges, full-contour restorations.
VITA
VITA PHYSIODENS O4L L6L O24E U24E
Tooth anatomy library, PHYSIODENS shapes, morphological reference for crowns and bridges in exocad.
ZRS
zrs16 ua F06 + 06 up-L
Tooth anatomy library: frontal morphology F06, occlusal form 06, upper-left, exocad.
ZRS
zrs22 ua F12 + 53 up-L
Tooth anatomy library, upper-left morphologies, reference for crown modeling in exocad.
ZRS
zrs45 ua M03 + 07 up-L
Anatomical tooth library, morphologies M03+07, upper left, crown modeling reference for exocad DentalCAD.
BEGO
CADAbut 3 1 NH
Interface library for NH connection, designing crowns and bridges in exocad.
BEGO
scanbody BEGO 20small
Scanbody geometry capturing implant position and indexation for BEGO in exocad
Cowellmedi
Sub N MU Bar conid
Multi-Unit geometries and bars for screw-retained bridges and bar suprastructures in exocad.
Cowellmedi
Sub N Ti S06 conid
Submerged Narrow implant library, Ti S06 conical connection, for exocad.
DIO
UF Sub Cemented ABT SSCA 55304
Cemented abutment library, UF Submerged platform, for crown and bridge design in exocad.
DIO
UF Sub Cemented ABT SSCA 65305
Cementable UF Submerged abutment library for modeling crowns and bridges in exocad.
DIO
UF Sub DIgital ABT DUR 4555
Digital UF Submerged abutment, configuration 4555, for implant-supported restorations in exocad.
DIO
UF Sub Hybrid Link UFHL 45702
Hybrid Link library for designing implant restorations on DIO UF Sub platform in exocad.
DIO
UF Sub Narrow Hex CA
Implant library for exocad: narrow Submerged platform, engaging hex connection for restorations.
Implant Direct
Smart Base Engaging 4mm
SmartBase Engaging 4mm abutment library, anti-rotational indexing for single crowns in exocad.
Thommen
DyTi-Base PF 4 5 Coated Captive Screw
Coated 4.5 Ti-Base with captive screw for implant crowns in exocad
Paulo
Paulo Giovanny 3
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, restorations
ZZ
ZZ - Generic
Tooth anatomy library with neutral morphologies for modeling crowns and bridges in exocad.
robtoly
robtoly-triangular
Triangular-contour tooth anatomy library for crown and bridge design in exocad.
Zirkonzahn
zirkonzahnAREUS
Anatomical tooth library, reference morphology for crowns and bridges in exocad.
Alpha-Bio
Tec CHC
CHC implant interface library for restoration design in exocad.
BEGO
CADAbut 0 5 NH
Abutment library for designing restorations on the 0 5 NH connection in exocad
BEGO
CADAbut 0 7 MultiPlus
Abutment library for exocad, designing implant-supported restorations on the MultiPlus interface.
BEGO
CADAbut 1 2 D
Abutment library for designing implant-supported restorations in exocad DentalCAD.
BEGO
MultiPlus multiunit
Multi-Unit geometries for screw-retained bridges and full-arch restorations in exocad.
Bicon
SHORT Fixed-Detachable MU Scanbody
Scanbody library for fixed-detachable Multi-Unit protocol, Standard and FDA variants, exocad.
Bicon
scanbody bicon 22small
Small 2.2 scanbody library aligning scans with implant position in exocad.
DIO
UF Sub Cemented ABT SSCA 65307
Cementable abutment geometry, UF Submerged platform, for crown and bridge design in exocad.
DIO
UF Sub DIgital ABT DUN 4555
Abutment geometry for designing implant-supported restorations on UF Submerged platform in exocad.
DIO
UF Sub DIgital ABT DUR 3555
Digital UF Submerged abutment library, configuration 3555, for crown and bridge design in exocad.
Noris
InternalHex Direct
Library for direct implant restorations with internal hex connection, exocad DentalCAD.
Thommen
DyTi-Base PF 4 0 Coated Captive Screw
Ti-Base geometry for crowns and bridges, PF 4.0 platform, captive screw, exocad.
Anatoly
Anatoly-square
Square-shaped tooth anatomy library for modeling crowns and restorations in exocad.
Grin
Grin Design Sueyder Botelho
Tooth anatomy library for exocad DentalCAD, reference shapes for crowns, bridges, full-anatomic restorations.
Other
Julian Cardona
Tooth anatomy library for exocad DentalCAD: reference morphologies for crowns, bridges, reconstructions.
BEGO
CADBar 1 4
Implant geometry library for designing implant-supported restorations in exocad DentalCAD.
DIO
UF Sub Cemented ABT SSCA 45204
Subgingival cemented abutment geometry, SSCA 45204 variant, for exocad DentalCAD.
DIO
UF Sub Cemented ABT SSCA 55105
Cemented abutment geometry, UF Submerged platform, for exocad implant module.
Glidewell/Hahn
HIO
Implant library with HIO connection geometry for restorations in exocad DentalCAD.
Thommen
DyTi-Base PF 4 0 PEEK Captive Screw
Ti-Base geometry for PEEK 4.0 variant, captive screw, implant restorations in exocad.
Other
Hereus
Reference tooth morphology library for exocad: crowns, bridges, full-anatomic restorations.
PDL
PDL CatBack1 6.0
Tooth anatomy library: reference morphologies for crowns, bridges, restorations in exocad.
Pogarskiy
Pogarskiy Design 0.1
Tooth anatomy library for exocad, modeling crowns, bridges, full-anatomy restorations.
Other
hd
Tooth anatomy library for exocad with detailed morphology and occlusal relief.
Other
zfx
Tooth anatomy library for exocad: reference shapes, starting morphology for crowns, bridges, restorations.
ZRS
zrs39 ua F29 + 53 up-L
Upper-left tooth anatomy library, reference for crowns and restorations in exocad.
BioConcept
BC BoneLevel Tapered
Tapered bone level implant library with internal hex connection for exoplan.
Bioner
TopDM
Top DM implants planning with unified prosthetic platform in exoplan
Biotec BTK
ISplus
Implant library for IS+ line used in exoplan implant planning.
C-Tech
NarrowDiameter
Two-piece narrow titanium implants, internal connection, for narrow ridges, exoplan.
Dental Tech
ImpLassic FT3
Implant library with conical Morse/FT connection for planning in exoplan.
Dental Tech
ImpLogic GII
Implant library for digital implant planning workflows in exoplan.
Dentegris
SL Tapered
Tapered titanium implant library with Morse taper connection for exoplan planning.
Geass
Omny
Implant system library for planning in exoplan; implants feature Synthegra surface.
Geass
way Slim
Narrow implant library for planning in exoplan, titanium, Synthegra surface.
HI-TEC
Expert
Surgical guide library for dental implants, digital planning in exoplan.
HI-TEC
Implex
Implant library for guided surgery planning and templates in exoplan.
IBS
Implant MagiCore MagicCuff2
Implant library with Morse taper conical connection for exoplan planning.
IBS
Implant MagiCore MagicCuff3
Implant library for digital planning and positioning in exoplan.
IBS
Implant MagiCore MagicCuff4
Implant library with MagicCuff4 conical connection for digital planning in exoplan.
IBS
Implant Magic FC Mini
Dental mini implant library with FDA clearance for exoplan planning.
Implacil
Cylindrical HI
Cylindrical implant library with internal hexagon connection for exoplan planning.
Implacil
Maestro CM
Implant library with Cone Morse conical connection for planning in exoplan
Implance
fixation
Library for surgical guides and fixation, digital guide planning in exoplan.
Implantswiss
TissueLevel
Tissue Level implant library, titanium, for exoplan, fully guided workflow, FDA version.
Implantswiss
kit
Surgical guide sleeve library for template planning and design in exoplan.
INTRAOSS
Titaoss Max CMC Cortical
Cortical dental implant library for implant planning and surgical guides in exoplan.
INTRAOSS
Titaoss Max CMX Extract
Titanium implants, Morse taper conical connection, for immediate placement planning in exoplan.
J Dental Care
JDEvolutionSLA
Implant system planning library for exoplan, high stability, immediate loading
J Dental Care
JD Icon Ultra S
Two-piece implant library for narrow gaps, planning in exoplan.
Noris Medical
Tuff
Bone-level implant library for guided surgery planning in exoplan.
Oxy Implant
Fixo Long 17
Implant library for exoplan, integrated 17° multi-unit abutment, immediate loading.
Oxy Implant
K1 Regular
Implant library for exoplan, Morse taper conical connection, original manufacturer workflow.
Ritter
NL SNAP
Implant library for exoplan with SNAP connection for overdenture, FDA marked.
SDS Swiss Dental Solutions
SDS12 oval
Oval-platform titanium implant library for premolar and molar planning in exoplan.
SDS Swiss Dental Solutions
SDS20 short
Zirconia short implant library for exoplan, for significant bone loss cases.
SGS
Dental P1D
Titanium implant library with internal hex connection for exoplan planning.
TAG
Dental Massif
Cylindrical screw implant with platform switching, planning library for exoplan.
Warantec
IU
Implant library with internal hex connection for planning in exoplan.
BT Lock
BT Lock
BTLock International implant library for digital planning and guided surgery in RealGUIDE.
Geass
Geass
Implant components, internal hex connection, titanium, planning and surgical guides in RealGUIDE.
Nucleoss
Nucleoss
Implant library for guided surgery planning in RealGUIDE; Bone Level, Tissue Level, Mono Block lines.
AB Dental
MU-P24 Short Model Analog
Multi-Unit geometries on MU-P24 short model analog for exocad
Bicon
SHORT Fixed-Detachable MU ImplantLevel
exocad library for fixed-detachable bridges at implant level, Multi-Unit component
Cowellmedi
Sub R DA S06 conid
Implant library for exocad with conical connection, for implant-supported restoration design.
DIO
UF Sub Cemented ABT SSCA 45407
Cemented UF Submerged abutment geometry for modeling crowns and bridges in exocad.
DIO
UF Sub DIgital ABT DCR 2555
Abutment library for DIO UF Submerged system, DCR interface, exocad
DIO
UF Sub DIgital ABT DUN 4570
Abutment library for exocad; UF Submerged Digital platform, restoration planning.
DIO
UF Sub Digital ABT DPR 4540
Abutment library for exocad, UF Submerged digital protocol, size 4540, prosthetic geometry.
Sweden & Martina
Premilled Abutment
Premilled abutment blank geometry for designing custom restorations in exocad.
Thommen
Ti-Base peek ScanAb
Ti-Base library with PEEK ScanAb scan abutment for exocad restorations.
Other
ExoRoss Mojito
Tooth anatomy library for exocad with expressive morphology for crowns and bridges.
Lorant
Lorant Stumpf 04
Tooth anatomy set, master morphology for crowns, bridges and full-anatomy proposals in exocad.
PDL
PDL CatBack1 6.1
Anatomy library of reference tooth forms for crowns and restorations in exocad.
Pogarskiy
Pogarskiy Design 5.3
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-anatomy restorations.
robtoly
robtoly-square
Square-shaped tooth anatomy library with parallel walls, crown reference for exocad.
Alpha-Bio
IS USA Ti DSP-XV DX
Titanium base library with DSP-XV DX connection for exocad implant module.
BEGO
CADAbut 11 1 F
Abutment geometry library with implant interface for designing restorations in exocad.
BEGO
CADAbut 5 1 D
Abutment geometry library for positioning implant-supported restorations on interface in exocad.
BEGO
Conical CADCAM NI SCXRSX CC
Implant library for exocad: non-rotational interface, conical connection SCX/RSX CC geometry.
Cowellmedi
Int R Ti S06 conid
Implant interface library, internal conical connection, titanium base, for exocad implant module.
Cowellmedi
Sub R ANG S11 conid
Angled S11 conid interface for Submerged Regular platform in exocad
DIO
UF Sub Cemented ABT SSCA 45307
Cemented abutment library for DIO UF Submerged, restoration modeling in exocad.
DIO
UF Sub Cemented ABT SSCA 75404
Cemented abutment geometry for modeling crowns and bridges in exocad.
DIO
UF Sub Hybrid Link UFHL 45402
exocad implant library, Link geometry for UF Sub Hybrid interface, crowns and bridges.
Ceramill
Ceramill Mindforms by Knut Miller - universal
Universal tooth anatomy library for modeling crowns, bridges and restorations in exocad.
DTLab
DTLab.16
Tooth anatomy library for exocad DentalCAD: starting shapes for crowns and bridges.
George
George Zacusai MAGALIE
Tooth anatomy library for exocad: balanced natural morphology for crowns, bridges, full-anatomy restorations.
Lorant
Lorant Stumpf 10
Anatomical library of reference tooth shapes, starting morphology for crowns and bridges in exocad.
Other
e-xofan
Tooth anatomy library for exocad: reference crown, bridge, full-anatomy shapes.
generic
generic-smooth
Tooth anatomy library for exocad with smoothed morphologies for crowns and bridges.
Zirkonzahn
zirkonzahnPAIAN
Tooth anatomy library for exocad: calm harmonious morphology, crowns and full-anatomical restorations.
Zirkonzahn
zirkonzahnSERAPHIM
Tooth anatomy library for exocad — morphology reference for crowns, bridges, restorations.
J Dental Care
JDEvolution
Implant library for exoplan, conical Morse taper connection, titanium Grade 4.
Z-Systems
Z5m
Zirconia ceramic dental implants, conical connection, for planning in exoplan.
Lasak
Lasak
Implant library BioniQ: cylindrical and tapered models for guided surgery in RealGUIDE.
Adin
Ti-base CloseFit RP-WP
Ti-Base components for CloseFit interface, RP and WP platforms, cement or screw-retained restorations in exocad.
Alpha-Bio
Tec CS
Implant library for exocad with CS connection for crowns and bridges.
BEGO
CADBar 2 1
Implant geometry configuration for exocad, links restoration to implant interface.
DIO
UF Sub DIgital ABT DCR 3570
Abutment library for exocad, DIO UF Submerged connection, implant-supported restorations.
DIO
UF Sub Digital ABT DPR 3555
Abutment geometry library, UF Submerged platform, for exocad implant module.
DIO
UF Sub Regular Non Hex CA
Implant library for DIO UF Submerged regular platform, non-engaging, exocad.
Glidewell/Hahn
NB-BM
Implant library for designing implant-supported restorations in exocad DentalCAD.
Thommen
DyTi-Base PF 5 0 PEEK Removable Screw
PEEK Ti-Base geometry, PF 5.0 interface, removable screw, for exocad.
Ceramill
Ceramill Mindforms by Knut Miller - triangular
Triangular tooth anatomy library for modeling crowns and bridges in exocad.
DTLab
DTLab.26
Tooth anatomy library for exocad DentalCAD with baseline crown and bridge morphologies.
Smeiga
Smeiga 09
Tooth anatomy set, reference morphology for crowns and bridges in exocad.
ZRS
zrs24 ua F14 + 04 up-L
Upper left tooth anatomy, F14+04 combination, reference for restorations in exocad.
BEGO
CADAbut 3 2 F
Implant library defining 3.2 F interface geometry for modeling suprastructures in exocad.
BEGO
CADAbut 5 1 F
CAD library of abutment geometry, 5.1 F interface, for implant restorations in exocad.
Bicon
SHORT Scannable Abutment stock
Stock scannable abutment geometry for cemented and screw-retained restorations in exocad.
Cowellmedi
Sub R Lock Bar
Bar geometry library for implant-supported bar constructions, Sub R interface, exocad DentalCAD.
Cowellmedi
Sub R Ti S11 stock
Implant library, Submerge R interface, stock S11 variant, for exocad DentalCAD.
DIO
UF Sub Cemented ABT UNSCA 40705
Cemented abutment library for crown and bridge design, Submerged platform, exocad
DIO
UF Sub DIgital ABT DUR 2555
Abutment geometry for UF Submerged Digital DUR platform, exocad implant module.
DIO
UF Sub DIgital ABT DUR 3570
UF Submerged digital abutment library, 3570 platform, for exocad implant restorations.
CTD
CTD1
Tooth anatomy library for exocad; reference morphologies for crowns, bridges, full-anatomy restorations.
DTLab
DTLab.12
Tooth anatomy library for exocad: morphological references for crowns, bridges, restorations.
DTLab
DTLab.18
Tooth anatomy library with reference morphologies for crowns and bridges in exocad.
Expression
Expression O2
Tooth anatomy library for exocad DentalCAD: crowns, bridges, full-anatomy restorations.
Expression
Expression P1
Tooth anatomy library for exocad, pronounced occlusion, reference for crowns and bridges.
Grin
Grin Design 3
Tooth anatomy library for exocad DentalCAD, reference morphology for crowns, bridges, full-anatomical restorations.
Smeiga
Smeiga 11
Tooth anatomy library: reference morphologies for crowns, bridges, full-anatomy restorations in exocad.
Other
U3 F32
Tooth anatomy library providing reference morphology for crowns, bridges, restorations in exocad.
ZOO
ZOO Dog
Dog-inspired tooth anatomy library for exocad, reference shapes for crowns, bridges, full-anatomy restorations.
Pritidenta
priti_T
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-anatomic restorations.
ZRS
zrs58
Tooth anatomy library for exocad DentalCAD: reference morphologies for crowns, bridges, full-anatomical restorations.
BEGO
CADBar 0 2
Interface library for designing implant-supported restorations in exocad DentalCAD.
Bicon
SHORT FDUA AbutmentLevel
Abutment-level library with reference geometry for designing restorations in exocad.
Cowellmedi
Sub N Ti A S06 conid
Implant library, Submerged Narrow line, conical connection, for exocad DentalCAD
Cowellmedi
Sub R Ti B S11 conid
Implant library for exocad, Submerge R interface, B/S11 configuration, titanium base.
DIO
UF Sub Cemented ABT SSCA 45104
Cemented abutment geometry, SSCA 45104 platform, for exocad restoration design.
DIO
UF Sub Cemented ABT SSCA 45305
Cemented UF Submerged abutment geometry for crown and bridge modeling in exocad.
DIO
UF Sub Cemented ABT SSCA 45504
Cemented UF Submerged abutment geometry for modeling crowns and bridges in exocad.
DIO
UF Sub Cemented ABT SSCA 55505
Abutment library for exocad, cement-retained restorations on UF Submerged platform
DIO
UF Sub DIgital ABT DUN 5555
Abutment library on UF Submerged Digital platform for implant-supported restorations in exocad.
Implant Direct
Smart Base Non Engaging 4mm
Non-engaging titanium base 4mm for implant-supported restoration design in exocad
DTLab
DTLab.21
Tooth anatomy library for exocad: reference crown and bridge shapes.
DTLab
DTLab.7
Tooth anatomy library for exocad: crown morphologies for restorative modeling.
Other
Moises Metring
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, restorations.
Other
Rigel
Tooth anatomy library: reference morphologies for crowns, bridges, restorations in exocad DentalCAD.
VITA
VITA Physiodents-X1M
X1M mould anatomy library for designing crowns and restorations in exocad.
VITA
VITA Physiodents-X3L
Anatomical X3L tooth-shape library for crowns, bridges and full-anatomy restorations in exocad
ZRS
zrs30 ua F20 + 54 up-L
Reference tooth morphology, upper F20 anatomy, variant 54 left, base for crowns and restorations in exocad.
3DDX
kit
Guided surgery kit library for designing implant surgical templates in exoplan.
3DDX
sleeve
Surgical sleeves for guided template design in exoplan.
Advan
fixation
Fixation pin library for surgical guide planning in exoplan.
Alpha Dent
Implant Active Konus
Implant library with conical Morse taper connection for exoplan planning.
Anker
BoneLevel SB2
Bone-level implant library with SB2 conical connection for exoplan planning.
Anker
sleeve
Sleeves and anchor pins for surgical guide design in exoplan.
Archimedes
MedGuide kit
Guided surgery kit library with depth control for exoplan planning software.
Archimedes
sleeve
Surgical sleeves for designing implant guide templates in exoplan.
Arum Dentistry
NB Mini
NB Mini implant library for surgical planning in exoplan.
Arum Dentistry
NB1
Surgical guide planning library for exoplan, implant system with FDA clearance
BB Dental
EVOLUTION SLIM
Implant library for surgical guide planning in exoplan software.
BB Dental
EVOLUTION STANDARD
Implant library with conical Morse taper connection for exoplan planning.
BioConcept
BC BoneLevel
Bone-level implant library with internal hex connection for exoplan surgical planning
BioConcept
BC TissueLevel Standard
Tissue-level implant library for exoplan surgical planning, external hexagon connection.
BioConcept
BC TissueLevel StandardPlus
Tissue-level implant library for digital planning in exoplan.
BioConcept
BC TissueLevel StandardPlus
Tissue-level Standard Plus implants for implant placement planning in exoplan.
BioConcept
BV BoneLevel Tapered
Tapered bone-level implant library with Morse taper connection for exoplan planning.
Biomate
Biomate Plus
Implant system library for surgical planning in exoplan software.
Biomate
Biomate
Dental implant library with Internal Hex connection for exoplan planning.
Bio Micron
ICI SinOcta ENG
Implant library with internal conical engaging connection for exoplan planning.
Bioner
Bikelt
Bikelt implant library for exoplan planning, dual thread, post-extraction cases.
Bioner
DMPlus
Implant planning library for exoplan, Morse taper conical connection.
Bioner
DMSlim
DMSlim narrow-diameter implant library for surgical planning in exoplan.
Bioner
Hibikelt
Implant library with conical internal hex connection for exoplan planning.
Bioner
Hikelt
HIKELT implant system library with unified prosthetic platform for exoplan planning.
Bioner
Ikelt
External hex implants with etched surface for surgical planning in exoplan.
Bioner
fixation
Surgical guide fixation pin library for exoplan guided surgery workflow.
Bioservice
Matrix R ConEx
Matrix R implant library with ConEx conical connection for exoplan implant planning.
Bio STI
STI Aggressive SLA
Titanium SLA implant library with internal hex connection for exoplan
Cera Root
CeraRoot 11
Zirconia ceramic dental implant library for implant planning in exoplan.
Cera Root
CeraRoot 12
Implant library for lateral and lower incisors, zirconia ceramic, exoplan planning.
Cera Root
CeraRoot 16
Monoblock zirconia molar implant library, one-piece design, for exoplan planning.
Cera Root
CeraRoot 21
One-piece zirconia implant for incisors and canines, exoplan library.
Cera Root
CeraRoot 34
FDA-approved one-piece zirconia implant with conical connection for exoplan planning.
Cera Root
CeraRoot 34L
Monoblock zirconia implant with internal connection for exoplan planning, FDA-cleared.
Conexao
Easy Grip Porous
Implant library with Morse taper conical connection, Porous surface, for exoplan.
Conexao
sleeve
Surgical sleeve library guiding drills in exoplan guided-surgery template design.
Cowellmedi
Innofit Lodestar kit
Surgical guide library for guided surgery in exoplan, compatible with various implants.
CSM Implant
Submerged III
Implant system library for guided surgery planning in exoplan.
CSM Implant
Submerged
Submerged implant library for guided planning in exoplan, FDA-cleared compatibility.
C-Tech
C Guide hard bone kit
Surgical guide library for exoplan; guided implant placement, hard-bone drilling protocol.
C-Tech
C Guide soft bone kit
Guided surgery sleeve library for exoplan, fully guided protocol for soft bone
Dental Tech
ImpLassic FTP
Implant planning library for exoplan, 6° conical connection with hexagonal positioning index
Dentin
Prestige
Implant library for guided surgery planning in exoplan, FDA-cleared line.
Derig
fixation
Fixation and anchor pin library for designing surgical guides in exoplan.
DSP
Biomedical Fitguide Long kit
Surgical guide library for exoplan, guided surgery using Long kit instruments.
DSP
Biomedical Fitguide Short kit
Surgical guide library for guided implant placement planning in exoplan.
DSP
Biomedical Fitguide fixation
Surgical guide library for exoplan with fixation pins; bone density I+II, III+IV protocols.
DSP
Biomedical Fitguide sleeve
Surgical sleeves from Fitguide Guide Creator System for designing templates in exoplan
Eckermann
Winner
Implant library with internal hex connection for digital planning in exoplan.
Geass
Omny XL
Implant library with expanding thread for post-extraction cases, high primary stability, exoplan.
Geass
way Mix
Implant library with internal conical (Morse taper) connection for exoplan, platform switching.
IBS
Implant MagiCore MagicCuff2
Implant library for MagiCore/MagicCuff2 digital planning in exoplan.
IBS
Implant MagiCore MagicCuff3
Endosseous dental implant library, MagiCore line, for exoplan planning, FDA-cleared.
IDI
IDALL
Dental implant library for implant placement planning in exoplan software.
IDI
kit
Guided surgery kit library for exoplan: sleeves and drills for implant planning.
Implacil
Cylindrical HE
Cylindrical implant library with external hex connection for exoplan planning.
Implacil
Cylindrical HI
Cylindrical implants with internal hex HI connection for exoplan planning, FDA-marked.
Implacil
Tapered HI
Tapered implant library with internal hex connection for exoplan planning.
Implacil
fixation
Anchor pin fixation components for surgical guide design in exoplan.
Implance
TissueLevel
Tissue-level implant library, external hex connection, for planning in exoplan
Implant
Logistics ImplantOne kit
Surgical guide library for exoplan, compatible with the Guided Drill Kit.
Implant
Logistics ImplantOne sleeve
Sleeve library for exoplan surgical guides, implant planning and guide design.
INTRAOSS
Titaoss Max CMA Conico
Implant components with conical Morse taper connection for exoplan planning.
Izenimplant
Wide kit
Surgical guide library for guided implant placement, Wide kit platform, exoplan.
Izenimplant
Zenex Plus T
Implant library for digital planning in exoplan; reversed taper design, SLA surface.
J Dental Care
JDIcon
Implant system library with 12° internal conical connection for exoplan planning
J Dental Care
JDIconF
Implant system library with internal conical 12° connection for exoplan.
J Dental Care
JDIconF
Implant library with internal conical 12° Morse taper connection for exoplan.
J Dental Care
JD Icon Plus Anodised
Implant library with internal conical 5° Morse taper connection, anodised neck, for exoplan planning.
J Dental Care
JD Icon Ultra S
Two-piece titanium implant library, JCORE internal hex connection, for exoplan.
Kinetical
Advance HI
Conical titanium implant library with internal hex connection for exoplan planning.
Kopp
CM Screw Platinum
Implant library with Morse cone connection, Grade IV titanium, for exoplan
Kopp
CM Screw Slim
Implant library with Cone Morse taper connection for planning in exoplan
Kopp
IH
Implant library with internal hexagon connection for planning in exoplan.
Lasak
BioniQ Plus Straight
Straight cylindrical titanium implants, internal hexagon, machined collar, planning in exoplan.
Lasak
BioniQ Tapered
Tapered titanium implant library with internal hex connection for exoplan planning.
Lasak
fixation
Fixation pin library for planning and positioning in surgical guides, exoplan.
Logon
Pilot kit
Surgical guide library for exoplan supporting pilot drilling for implant system.
Logon
sleeve
Sleeve library with CT Planning Tube component for exoplan surgical guides.
MEDENS
fixation
exoplan surgical guide library for positioning fixation components in guided surgery.
MEDENS
sleeve
Sleeves for surgical guide design in exoplan, guided implant placement system.
medical-instinct
Bone Trust Plus Cone
Self-tapping implant library, Morse taper conical connection, platform switching, for exoplan.
medical-instinct
Bone Trust Plus Cone
Implant library with conical Morse taper connection for planning in exoplan.
medical-instinct
Bone Trust Plus Hex
Implant system library with external hex connection, self-tapping design, for exoplan planning.
Mode
Implant kit
Surgical guide library for exoplan: implant planning and guided sleeve design.
myplant
bio
Hybrid implant library combining ceramic and titanium properties, for exoplan planning.
myplant
two
Two-stage titanium implant library for surgical planning in exoplan, FDA marked.
Neo Kings
STI HexagonoInterno
Implant library with internal hexagon connection, titanium, for exoplan planning.
Neo Kings
sleeve
Sleeve components for designing surgical guides in exoplan.
Notch
fixation
Titanium fixation anchor pins for surgical guide planning in exoplan.
Notch
sleeve
Surgical sleeves for designing guided surgery templates in exoplan.
Nucleoss
fixation
Surgical guide library for exoplan; fixation components of dental implant system.
NUVO
InternalFIT
Implant library for exoplan, internal hex, conical design, platform switching, FDA
Oxy Implant
Fixo Long 0
Implant library for exoplan, Fixo Long 0° platform, guided surgery.
Oxy Implant
Fixo Mini 0
Miniaturized one-piece titanium implant with integrated multi-unit abutment, internal hex, for exoplan.
Oxy Implant
Fixo Mini 17
Implant library for exoplan, 17° angled mini implants, guided planning protocols.
Oxy Implant
Fixo Short 0
One-piece Fixo Short implant library with internal connection for exoplan planning.
Oxy Implant
Fixo Short 17
Short implants with 17° Morse taper conical connection for exoplan planning.
Oxy Implant
Fixo Short 30
Library of short 30° angled implants for planning in exoplan.
Oxy Implant
K1 Narrow
Narrow-platform implant library for digital implant planning in exoplan.
Oxy Implant
Piesse INT PS Micro
Implant library, internal hex connection, titanium, for digital planning in exoplan.
Plenum
fixation
Surgical guides for fixation pins, securing template, guiding body, threaded tip, exoplan.
Plenum
sleeve
Surgical sleeves for exoplan, used in Guide Creator to design guides
Prodent Italia
Proshape TS Hybrid
Implant library for exoplan with cylindrical-conical geometry and conical connection.
Prodent Italia
Proshape TS Integral
Implants for exoplan planning, internal conical hex connection, single platform.
Rex Implants
Rex TL18 Piezo
Implant library for digital planning of REX TL 1.8 PiezoImplant in exoplan.
Rex Implants
Rex TL29 Piezo
Titanium implant library with conical Morse taper connection for exoplan guided planning.
SGS
Dental P1
Implant library for P1 system planning in exoplan, fully guided workflow.
SGS
Dental P7D
P7D implant system library for digital implant planning in exoplan, titanium.
Singular
Implants CILINDRICO CM
Cylindrical implant library with conical Morse taper connection for exoplan.
Singular
Implants CONICO CM
Conical Cone Morse implant library, titanium Grade 4, for exoplan planning.
Sterngold
MOR A
Small-diameter implant library, internal hexagon, titanium, for exoplan; FDA-marked version.
Sterngold
MOR
Small-diameter titanium implants, internal hex; removable and fixed prosthetics, exoplan, FDA.
Sterngold
TRU
Implant library with conical Morse taper connection for exoplan guided surgery.
TAG
Dental Axis
Conical screw implant library with platform switching for exoplan guided planning.
URIS
OMNI
Implant library for exoplan, conical Morse taper connection, Straight and Tapered systems, FDA 510(k) cleared.
URIS
Pylon sleeve
Sleeve library with surgical guide templates for guided implant placement, exoplan.
URIS
fixation
Fixation pin library for surgical guides, guide design in exoplan.
3P ImplaFavourite
3P ImplaFavourite
Implant library for digital implant planning and guided surgery in RealGUIDE.
Bauers Implants
Bauers Implants
Guided surgery planning components for RealGUIDE, conical Morse taper connection.
Bio 3 Implants
Bio 3 Implants
Implants with conical connection for implant planning and guided surgery in RealGUIDE.
Bionica
Bionica
Titanium implant library with internal hex connection for RealGUIDE planning.
Bone System
Bone System
Implant library for digital implant planning and guided surgery in RealGUIDE.
DSP Biomedical
DSP Biomedical
Implant planning components for RealGUIDE: CMI/HIS/HIL systems, Morse taper, internal hex.
Easy Implant
Easy Implant
Implant library for RealGUIDE: digital planning and surgical guides, Hexcel/Master/Mini lines.
Eckermann
Eckermann
Guided implant planning components for RealGUIDE, implants and surgical elements
Edierre
Edierre
Implant components library for RealGUIDE digital planning and surgical guides.
Ghimas
Ghimas
Implant library with conical Morse taper connection for guided surgery planning in RealGUIDE
HDC
HDC
Titanium implant library for guided surgery planning in RealGUIDE, multiple platforms.
Implants Diffusion International
Implants Diffusion International
Titanium implant components for implant planning and guided surgery in RealGUIDE.
Oi-Dental
Oi-Dental
Implant library for guided surgery planning in RealGUIDE: zygomatic, pterygoid, monophasic implants.
Ornaghi
Ornaghi
Digital implants for guided surgery planning in RealGUIDE.
Ornaghi My Implant
Ornaghi My Implant
Components for implant planning and surgical guides in RealGUIDE.
Osseo Touch
Osseo Touch
Implant planning components for RealGUIDE, Conex conical connection, compatible with surgical guides.
Sterngold Dental MOR
Sterngold Dental MOR
RealGUIDE library: small-diameter mini-implants, conical Mor-Connect connection, for prosthesis fixation.
TRATE AG
TRATE AG
Digital titanium implant models for implant planning and guided surgery in RealGUIDE.
Z-System
Z-System
Components for guided surgery planning in RealGUIDE; zirconia ceramic implants, Z5 system.
Unidesa Odi
Unidesa Odi
Artificial teeth library, odident+ line, OpenFiles format, for exocad Full Denture/DentureCAD.
Vinci Smile
Vinci Smile
Tooth library for full removable dentures in exocad DentureCAD, multilayer NOBILDENT lines.
BEGO
SubTec CADCAM S
Component library, S configuration, for designing implant-supported restorations in exocad.
Cowellmedi
Int W DA S06 conid
Implant interface, wide platform, conical connection, for restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 45405
Cemented abutment library on UF Submerged platform for exocad restoration design
DIO
UF Sub Cemented ABT SSCA 55307
Cemented UF Submerged abutment geometry, prosthetic base for restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 75505
Cementable abutment CAD geometry, SSCA 75505 connection, for exocad DentalCAD.
DIO
UF Sub DIgital ABT DLN 4570
Abutment library for exocad; implant-supported crowns, bridges and hybrid restorations.
DIO
UF Sub DIgital ABT DUR 5570
UF Submerged digital abutment library, 5570 platform, for exocad DentalCAD restorations.
Anatoly
Anatoly-triangular
Tooth anatomy library with triangular morphologies for modeling crowns in exocad DentalCAD.
FOBOS
FOBOS-Glarus ( PRO )
Tooth morphology library providing initial crown and restoration shapes for exocad.
Other
HERMES
Tooth anatomy library for exocad DentalCAD: reference shapes for crowns and bridges.
Lorant
Lorant Stumpf 05
Reference tooth anatomy library, master shapes for crowns, bridges and restorations, exocad.
Paulo
Paulo Giovanny 2
Tooth anatomy library for exocad, reference morphologies as starting shapes for crowns
Pogarskiy
Pogarskiy Design 1.3
Reference tooth anatomy library for modeling crowns and restorations in exocad
Other
SAO
Tooth anatomy library for exocad DentalCAD: reference shapes for crowns, bridges, full-contour restorations.
VITA
VITA Physiodents-T5M
Tooth anatomy library, T5M medium-size shape, reference for crowns and restorations in exocad DentalCAD.
VITA
VITA Physiodents-Z1S
Anatomical tooth-form library for modeling crowns, bridges, full-anatomy restorations in exocad.
Other
eliko2
Tooth anatomy library for exocad: reference shapes for crowns, bridges, restorations.
Zirkonzahn
zirkonzahn
Anatomical tooth library for modeling crowns, bridges, restorations in exocad.
AB Dental
CP Ti-Bases
Ti-Base geometries for restorations on CP connection in exocad
AB Dental
NP Ti-Bases
Ti-Base geometries for NP platform: crowns and bridges with antirotation, exocad.
BEGO
CADAbut 6 1 NH
Titanium base library for designing implant-supported restorations in exocad.
BEGO
CADBar 17 2 AN
Implant library for exocad; anti-rotational AN interface for single restorations.
BEGO
CADBar 3 1
Geometry configuration from series group three for designing implant restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 75405
Cemented abutment geometry with SSCA 75405 connection for exocad-implant.
DIO
UF Sub UV PLUS ABT DC
Abutment geometry for UF Submerged UV PLUS interface, implant restoration modeling in exocad DentalCAD.
Glidewell/Hahn
MG-AR
Implant library with MG-AR interface for implant-supported restorations in exocad.
DTLab
DTLab.27
Tooth anatomy library for exocad: reference morphologies, starting geometry for crowns, bridges.
Gebdi
Gebdi Tribos L1
Tooth anatomy library, L1 character, soft rounded relief, reference for exocad restorations.
Gebdi
Gebdi Tribos L5
Tooth anatomy library, L5 character: reference shapes for crowns, restorations in exocad.
Ivoclar
IVOCLAR-S72
Anatomical tooth library, S72 morphology, reference for crown and bridge modeling in exocad
Other
Lorca
Tooth anatomy library with coherent morphologies, reference shapes for crowns and bridges in exocad DentalCAD
Other
Mystery Anatomy
Tooth anatomy library for exocad DentalCAD, source morphology for crowns, bridges, restorations.
Smeiga
Smeiga 07
Anatomical tooth-form library for exocad DentalCAD: crowns, bridges, full-anatomy restorations.
ZRS
zrs52 ua M10 + 56 up-L
Tooth anatomy library for exocad: reference shapes for crowns, bridges, full-contour restorations.
AB Dental
SP Ti-Bases
Ti-Base library for exocad, SP platform, screw-retained crowns and bridges.
Bicon
SHORT Fixed-Detachable MU Cast
Castable component for Multi-Unit fixed-detachable, Standard and FDA variants, exocad.
DIO
UF Sub Cemented ABT SSCA 65304
Cemented abutment geometry, UF Submerged platform, for crown modeling in exocad.
DIO
UF Sub Cemented ABT SSCA 75204
Cementable stock abutment library for UF Submerged platform, exocad crown/bridge design.
DIO
UF Sub DIgital ABT DLN 2570
Abutment library for positioning restorations on DIO platform in exocad.
Euroteknika
Naturactisd3 NaturallPlusd3
Component library for Ø3 narrow-diameter implants, restorative design in exocad DentalCAD.
Thommen
VARIOmulti Ti-Base multiunit support
Ti-Base with Multi-Unit interface for crowns and bridges, exocad
Brenes
Brenes-Elchi Square Round
Hybrid tooth anatomy library, square silhouette with rounded transitions, for exocad.
DTLab
DTLab.17
Tooth anatomy library for exocad with reference morphologies for crowns and bridges
Grin
Grin Design 4
Tooth anatomy library for exocad DentalCAD: reference morphologies for crowns, bridges, full-anatomy restorations.
PDL
PDL CatBack1 2.2
Reference tooth morphology library for designing crowns, bridges, full-anatomy restorations in exocad.
Other
RHEIA
Tooth anatomy library for exocad: morphologies for crowns, bridges, full-anatomical restorations.
Zirkonzahn
zirkonzahnRHEIA
Tooth anatomy library for exocad, morphology reference for crowns and full-contour restorations.
ZRS
zrs60
Tooth anatomy library for exocad with morphologies for crowns, bridges, full-anatomical restorations.
Other
¦½-(-+--2.0
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-contour restorations.
Anthogyr
Anthogyr-Labside-Flexibase-DT
Flexibase Ti-base library for implant-supported restoration design in exocad.
BEGO
CADAbut 1 2 F
Implant interface library for designing implant-supported restorations in exocad.
BEGO
CADAbut 1 4 NH
Abutment geometry library for designing implant-supported crowns and bridges in exocad.
Bicon
SHORT FDUA Copings
Coping geometry on SHORT FDUA abutment for single crowns and bridges, exocad.
DIO
UF Sub Cemented ABT SSCA 45507
Cemented UF Submerged abutment geometry library for modeling restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 55507
Abutment CAD geometry for cement-retained crowns and bridges, UF Submerged platform, exocad.
DIO
UF Sub Cemented ABT SSCA 75304
Cementable stock abutment library for exocad, restoration modeling on UF Submerged platform.
Glidewell/Hahn
CL
CL implant library for designing implant-supported restorations in exocad.
Thommen
DyTi-Base PF 4 0 Coated Removable Screw
Coated 4.0 Ti-Base geometry, removable screw, crowns and bridges, exocad.
Other
11 WHITE LADY
Tooth anatomy library, upper central incisor with feminine morphology, anterior esthetics for exocad.
DTLab
DTLab.10
Tooth anatomy library for exocad DentalCAD: reference morphologies for crowns, bridges, full-anatomical restorations.
DTLab
DTLab.14
Tooth anatomy library for exocad: morphological references for crowns, bridges, restorations.
DTLab
DTLab.5
Tooth morphology library for exocad DentalCAD, reference shapes for crowns and restorations.
Grin
Grin Design 8
Tooth anatomy library, reference morphology for crowns and bridges in exocad.
Other
Maxxima
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, restorations.
PDL
PDL CatBack1 0.1
Tooth anatomy library with reference morphologies for crowns and bridges in exocad.
Pogarskiy
Pogarskiy Design 0.2
Tooth anatomy library for exocad: reference morphology for crowns, bridges, restorations.
RAINBOW
RAINBOW 20 Orange
Tooth anatomy set for modeling crowns and restorations in exocad.
BEGO
CADAbut 16 1 F
Abutment geometry library for designing implant-supported restorations in exocad.
BEGO
CADAbut 5 2 F
CAD library for exocad defining abutment geometry, 5.2 F platform, implant-supported restorations.
BEGO
CADAbut 8 1 DO
Abutment geometry library with 8.1 DO interface for exocad DentalCAD.
Cowellmedi
Sub R Lock DA
Implant library for exocad, Sub R Lock connection, for implant-supported restoration design.
DIO
UF Sub Cemented ABT SSCA 55204
Abutment library for exocad, UF Submerged platform, cemented crowns and bridges.
DIO
UF Sub Digital ABT DMR 2555
UF Submerged Digital abutment library, size DMR 2555, for implant crown and bridge design in exocad.
DIO
UF Sub Digital ABT DMR 3570
Abutment library, DMR 3570 size, UF Submerged connection, for exocad.
DIO
UF Sub Digital ABT DPR 1570
Abutment geometry library, article DPR 1570, UF Sub Digital interface, for exocad.
DIO
UF Sub Digital ABT DPR 2540
Abutment library with UF Sub Digital interface, article DPR 2540, for exocad.
Glidewell/Hahn
PR-CNX
Implant library for exocad with PR-CNX connection geometry for implant-supported restorations
DTLab
DTLab.4
Tooth anatomy library: reference morphologies for designing crowns and full restorations in exocad.
Expression
Expression G3
Tooth anatomy library for exocad DentalCAD; morphological reference for crowns and bridges.
Peak
Peak Point - Square
Tooth anatomy library with square-shaped morphology, reference for crowns and bridges in exocad.
Pritidenta
Priti R
Tooth anatomy library for exocad DentalCAD: reference forms modeling crowns, bridges, restorations.
RAINBOW
RAINBOW 40 Green Triangular
Triangular tooth anatomy library, reference morphology for crowns and restorations in exocad.
Shmatkov
Shmatkov (class 1)
Authored tooth anatomy library, class 1 morphology, crowns and bridges for exocad DentalCAD
Other
alternative
Tooth anatomy library for exocad DentalCAD: alternative morphology for crowns, bridges, full-anatomic restorations.
ZRS
zrs54
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, full-anatomical restorations.
2INGIS
sleeve
Sleeve library for guided surgery planning workflow in exoplan.
Advan
GTB kit
Surgical guide library with sleeves and fully guided drills for Advan GTB and ONE, exoplan.
Advan
One kit
Surgical guide library for guided implant placement in exoplan
Advan
sleeve
Sleeve library for designing guided surgery templates in exoplan.
Anker
BoneLevel SB1
Bone-level SB1 implants for exoplan planning, FDA-cleared system
Anker
BoneLevel SB2
Bone level implant library for surgical guide planning in exoplan.
Anker
BoneLevel SB3
SB-III bone level implants for surgical planning in exoplan.
Anker
fixation
Anchor pin fixation components for surgical guide design in exoplan.
Ao N Implants
Cyroth CC
Implant library with conical connection for exoplan, FDA cleared, fully guided workflow.
Ao N Implants
Is Four CC
Implant library with conical connection for exoplan; MU, Ti, DC components.
Ao N Implants
Is Four CC
Implant library for exoplan planning, internal hex connection, titanium.
Archimedes
MedGuide fixation
Fixation pin library for surgical guide design in exoplan.
BB Dental
3P SLIM
Implant library with Morse taper conical connection for exoplan planning.
BB Dental
3P STANDARD
Implant library for 3P line with trilobe connection for exoplan planning.
BB Dental
GuidedSurgery kit
exoplan library for planning guided implant surgery with dedicated surgical kit.
BB Dental
GuidedSurgery sleeve
Surgical sleeves for guided implant surgery templates in exoplan.
BB Dental
WIDE STANDARD
Implant library of WIDE line for surgical planning in exoplan.
BB Dental
fixation
Anchor pin library for surgical guide design workflows in exoplan.
Bilimplant
fixation
Fixation pin library for surgical guide planning in exoplan.
Bio 3 Implants
Advanced
Implant library for exoplan surgical planning, internal hex connection.
BioConcept
BC TissueLevel TaperedEffect
Tissue-level tapered-effect implant library for surgical planning in exoplan, FDA-cleared.
BIO-FIX
CM
CM system implants for digital implant planning in exoplan.
BIO-FIX
HE
External hexagon implants for implant planning workflows in exoplan.
BIO-FIX
HI
HI line implant library for digital implant planning in exoplan.
Bio Micron
IEI PEN
Implant library with internal hex connection for surgical planning in exoplan
Bio Micron
ISC
Tissue-level titanium alloy implant library for surgical planning in exoplan.
Bio Micron
TWS C
TWS C implant system library for surgical planning in exoplan.
Bioservice
Matrix CF ConEx
ConEx implant library for exoplan, template-guided navigation surgery.
Bioservice
Matrix InthEx C
Implant library with internal hex connection for digital planning in exoplan.
Bioservice
Matrix InthEx CF
Implant library for exoplan, internal hex connection, surgical planning.
Bioservice
Matrix InthEx F
Implant library with internal hex connection for exoplan surgical planning.
Bioservice
Matrix InthEx R Aesthetic
Implant system with internal hex connection for planning in exoplan
Bioservice
Matrix InthEx R Thunder
Implant library, MaTrix line with internal hex connection, for exoplan.
Bioservice
Matrix InthEx R
Standard implant library with internal hex connection for exoplan.
Bioservice
Matrix InthEx SL
Implant library with internal hex connection for exoplan surgical planning.
Bioservice
Matrix InthEx Y Aesthetic
MaTrix InthEx implants with internal hex connection for exoplan implant planning.
Cera Root
CeraRoot 14
Zirconia ceramic implant, conical internal connection, for exoplan planning, FDA-marked.
CLC Scientific
CLC CONIC
Implant library with conical Morse taper connection for exoplan planning.
CLC Scientific
fixation
Fixation pin library for surgical guide design in exoplan/Guide Creator.
CLC Scientific
kit
Surgical kit library for exoplan; plan surgical stages using system instruments.
CLC Scientific
sleeve
Surgical sleeve library for designing surgical guides in exoplan.
Conexao
fixation
Components for surgical guides and fixation in digital implant planning, exoplan.
Dental Tech
Implassic TR3
Transmucosal implant library for implant placement planning in exoplan.
Dentin
Classic
Implant library for digital implant placement planning in exoplan.
Dentin
Classic
Classic line implant library for surgical planning in exoplan, FDA 510(k).
Dentin
Prestige
Implant library for exoplan, wide range of indications and bone types.
Dentin
Rapid
Implant library with FDA 510(k) clearance for planning in exoplan.
Dentix Millennium
SoftBone IH
Implant library for exoplan, Internal Hex connection, Ti-bases and multi-unit compatible.
Derig
Biodent CMH
Implant library for surgical planning in exoplan, conical platform connection.
Derig
Bioneck CMH
Implant library for exoplan, conical Morse connection with hexagonal anti-rotation element.
Derig
Dynamic CMH
Implant library for exoplan, Cone Morse conical connection with internal hexagon.
Derig
Kort HEX
Short implant planning library with external hexagon (HEX) connection for exoplan.
Derig
sleeve
Sleeves for surgical guide design, guided surgery system, exoplan.
DSP
Biomedical CMI Biofit
Implant library for exoplan; CMI Biofit system planning, Fully Guided, Sleeveless.
DTI
DTIActive Mini SLA
Mini implant library with SLA surface for digital planning in exoplan, FDA-marked
DTI
DTIActive Standard SLA
Implant library with internal hex, SLA surface, for exoplan planning
DTI
DTIActive UltraMini SLA
Ultra-mini diameter titanium implant library, SLA surface, for exoplan planning.
Etgar
LOGIC
Implant system library for exoplan planning, one- and two-stage protocols
Etgar
MONO
Monolithic implant library for planning and positioning in exoplan.
FMD-Dental
Uni Qo Adapt A
Implant system library for surgical guide planning in exoplan; unified platform.
FMD-Dental
sleeve
Surgical sleeve library for designing surgical guides in exoplan/Guide Creator.
IDI
ID3
Narrow titanium implant library, internal hex connection, for exoplan, limited space
IDI
IDBIO
Implant library, cylindro-conical shape, internal hex connection, for exoplan planning.
IDI
IDCAM M
Cylindro-conical implants with internal conical connection for guided planning in exoplan.
IDI
IDCAM ST
Implant library with cylindro-conical body, Morse taper 2.5° conical connection, for exoplan.
IDI
IDMAX
Cylindro-tapered implant system with conical connection for planning in exoplan.
IDI
IDSLIM GH15
Implant library with transgingival esthetic GH15 collar for digital planning in exoplan.
IDI
IDSLIM GH30
IDSlim line implant library with 3.0 mm gingival height for exoplan planning.
IDI
IDSLIM GH50
Narrow implant library for exoplan with transgingival aesthetic GH50 collar
Implant
Logistics ImplantOne100
Implant library for surgical planning of Series 100 implants in exoplan.
Implant
Logistics ImplantOne300
Implant library for exoplan planning, Implant-One system, plan fda version.
Implant
Logistics ImplantOne400
Implant system library for digital planning in exoplan, FDA-cleared
Izenimplant
Mini kit
Surgical guide library for exoplan Guide Creator, sleeve and non-sleeve support.
Izenimplant
Regular kit
Surgical guide library for exoplan, guided implant placement, Regular kit
Izenimplant
Zenex Multi I
Implant system library for exoplan planning, includes ScanBody and Ti-Link abutment.
Izenimplant
Zenex Multi I
Implant library for exoplan, conical Morse taper connection, digital planning
Izenimplant
Zenex Multi T
Implant system library with internal hexagonal (T-type) connection for exoplan planning.
Izenimplant
Zenex Plus I
Titanium implant library for exoplan, Internal Hex connection, digital planning.
Izenimplant
Zenex Plus R
Implant library, R-System platform, for exoplan planning; includes ScanBody and Ti-Link Abutment.
Izenimplant
fixation
Anchor pin fixation library for surgical guides in exoplan, guided surgery.
Izenimplant
sleeve
Surgical sleeve library for guided surgical template design in exoplan.
J Dental Care
JDIconPlus
Implant library for exoplan, 5° Morse taper conical connection.
Kinetical
Advance CC
Implant library with conical connection for guided surgery planning in exoplan.
Kinetical
Advance XS
Bone level implant library with internal hex connection for exoplan
Kinetical
Spirit HI
Bone-level implant library with internal hex and conical body for exoplan
Kinetical
Spirit XS
Implant library for exoplan, fully guided protocol, includes five implants.
Kopp
EH
Implant library, external hex connection, for planning and guide design in exoplan.
MEDENS
NovoColosso HE
Implant system library with hex connection for surgical guide planning in exoplan.
MEDENS
kit
Surgical kit library for exoplan: guided implant surgery planning and design.
ML
Implant System SHe
Implant library for guided surgery planning in exoplan software.
ML
Implant System SHi
Implant library for exoplan, implantation planning with compatible components in digital workflow
ML
Implant System SHiCortical
Implant library for exoplan: cortical fixation, implant planning and surgical guides.
ML
Implant System SRi
Implant library for exoplan; SRi system with Ti base, direct-to-implant, pre-milled.
Mode
Implant Level
Implant library for exoplan, planning the LEVEL line; connection unconfirmed
Mode
Implant Provo C
Implant library for exoplan: one-piece system, internal hex, cement retention.
Mode
Implant Provo S
One-piece bendable implant library for digital surgical planning in exoplan.
Mode
Implant Rapid
Dental implant library for digital planning and component selection in exoplan.
Mode
Implant Short
Short implant library for digital planning in exoplan, surgical workflows
Mode
Implant Shorter
Implant library with internal hex connection for digital planning in exoplan.
Mode
Implant fixation
Surgical guide library with fixation pins for implant planning in exoplan
Mode
Implant sleeve
Surgical sleeve library for designing guided surgical templates in exoplan/Guide Creator.
Multysystem
CC 10 P ST
Implant library for exoplan: two-stage CC, platform switching, internal hex.
Multysystem
CC 10 ST
Implant library for guided surgery planning in exoplan, CC series.
Multysystem
CC 10 TM
Two-piece implant library with internal hexagon connection for exoplan planning.
Multysystem
CC 20 NST
Implant library for exoplan, two-stage line, conical Morse taper connection, titanium.
Multysystem
CC 20 TM
Implant library with conical connection for surgical planning in exoplan.
Multysystem
TC 10 TC N
Implant library, TC-N series with Morse taper conical connection for exoplan, digital planning and guided surgery.
Multysystem
TC 10 TC R
Bicortical TC-R line implant library for surgical planning in exoplan.
Multysystem
TC 20 TC R
Planning library for two-stage conical implants with TC-R/TC connection in exoplan.
myplant
two
Two-piece titanium implant system for digital treatment planning in exoplan.
Neo Kings
NK3 ConoMorse
Implant library with conical Morse connection for surgical planning in exoplan.
Neo Kings
fixation
Fixation pin library for designing surgical guides in exoplan.
Neo Kings
kit
Surgical guide library for exoplan: sleeves and guides for guided implant placement.
Notch
kit
Surgical guide library for exoplan: implant planning and guided surgery.
NUVO
ConicalFIT
Implant library with internal conical connection for surgical planning in exoplan.
ONEDAYBIOTECH
MT ACT
Implant library for exoplan planning, original abutments, partially guided workflow.
Plenum
Regular
Implant system library for exoplan: 3D-printed implants, anterior restorations, compatible scanbodies.
Plenum
Short
Short implants library for posterior restorations with limited bone height, exoplan
Plenum
Slim
Implant library for exoplan; single restorations of upper laterals and lower incisors.
Plenum
kit
Surgical kit library for planning guided surgery templates in exoplan.
Prodent Italia
Prime Conomet TS
Implant library with conical Morse taper connection for planning in exoplan.
Prodent Italia
Prime SM Free
Conical root-form implant library for exoplan; supports Ti-bases and direct-to-implant.
Prodent Italia
Prime SM
Implant library with conical Morse taper connection for exoplan planning.
Prodent Italia
Prime Twinner SM
Implant library for exoplan, PRIME/TWINNER line, internal hexagonal SM connection.
Prodent Italia
Prowide CF
Short implant library, single conical Morse taper platform, for exoplan.
SGS
Dental fixation
Sleeves, drills and fixation pins library for surgical guides in exoplan.
Singular
Implants CILINDRICO HE
Cylindrical implants with external hex connection for implant planning in exoplan.
Singular
Implants CONICO HE
Conical implant library with external hex connection for exoplan planning.
Singular
Implants GODIRECT CM
Implant library with conical CM connection, titanium Grade 4, for exoplan.
Solvo UK
Premium Ultra Mini SLA
Implant library for exoplan, SLA surface, lengths 10–15 mm.
Surgikor
Immediate Hex
Immediate-placement implant library, external hex connection, for surgical planning in exoplan.
Surgikor
Versatile Hex
Implant system library with internal hexagonal connection for exoplan.
TIONE
Go kit
Surgical guide library for exoplan: digital planning and guided implant placement.
TIONE
Mini TS
Standard dental implant library for surgical planning in exoplan software.
TIONE
TS
Implant library with internal connection for placement planning in exoplan.
TIONE
sleeve
Surgical sleeves for fully guided templates, TW implant platform, exoplan.
Trausim
BLE Bone Level Evolution
Bone-level implant library, internal hex connection, titanium Grade 4, planning in exoplan
Trausim
NT
Titanium implant system library with internal hex connection for exoplan planning
Tree Oss
Anatomic CE
Conical implant library with anatomic root-shaped design, external hex, for exoplan.
Tree Oss
Anatomic CI PS
Implant library for exoplan, conical Morse taper connection, PS platform.
Tree Oss
Anatomic CI
Implant library with anatomic conical root design for exoplan planning
Tree Oss
Anatomic IH
Anatomic tapered implant with internal hex IH connection for exoplan planning.
Tree Oss
HS CI PS
Implant library with internal tri-channel connection and Platform Shift for exoplan.
Tree Oss
HS CI
High-stability implant library, tapered body, internal tri-channel connection, for exoplan.
Tree Oss
HS IH
Planning library for conical self-tapping implants with internal hex connection, exoplan.
Tree Oss
Rapid CE
Self-tapping implant, parallel walls, conical apex, external hex, Oxalife surface; for exoplan.
Tree Oss
Simple IH
Conical implant library with internal hex and platform shift for exoplan planning.
Tree Oss
fixation
Fixation component library for surgical template in exoplan, guided surgery planning.
Tree Oss
sleeve
Surgical sleeve library for designing guides in exoplan, guided surgery.
URIS
OMNI
Implant library for implant planning in exoplan; Straight and Tapered options.
URIS
Pylon kit
Surgical guide library for exoplan, guided surgery via Pylon Guide Creator.
3 Dmedica
3 Dmedica
Implant and abutment library for digital planning and surgical guides in RealGUIDE.
Advan
Advan
Implant and prosthetic component library for planning and guided surgery in RealGUIDE
Allmed
Allmed
Implant components Evolution2000, Mini Ball, MF for guided surgery planning in RealGUIDE.
AVENIR
AVENIR
Implant library for dental implant planning and guided surgery in RealGUIDE.
AXELMED
AXELMED
Components for RealGUIDE: digital implant planning and guided surgery with Paradigma implants.
AZ Implant
AZ Implant
Components for RealGUIDE: implant planning and surgical guide fabrication with original sleeves.
BHI
BHI
Implant components library for RealGUIDE: digital implant planning and surgical guide preparation.
Bilimplant
Bilimplant
Components for implant planning and surgical guide design in RealGUIDE.
Bioservice srl
Bioservice srl
Implant library, conical ConEx® connection, for planning and surgical guides in RealGUIDE.
Biotype
Biotype
Implant and prosthetic components library, including Vertical Neck, for RealGUIDE planning
CLC Scientific
CLC Scientific
Implant library for RealGUIDE guided surgery planning; 6° conical connection, platform switching.
Dentha
Dentha
Essenthial implants with internal hex connection for guided surgery planning in RealGUIDE.
Eureka
Eureka
Royal-Dent Eureka implant library by Intai for guided surgery planning in RealGUIDE.
FDS 76
FDS 76
Implant library components for RealGUIDE: digital planning and guided surgery.
FMD-Dental
FMD-Dental
Implant and surgical sleeve library for planning and guided surgery in RealGUIDE.
Futura
Futura
Components for guided implant surgery planning in RealGUIDE; PRI, KRI, PRE, VIP, MPA, VD lines.
GEO
GEO
Library components for planning implant positioning and abutment selection in RealGUIDE.
GIESSE Technology
GIESSE Technology
Components for digital implant planning and guided surgery in RealGUIDE.
IDC
IDC
Implant system components for digital planning and guided surgery in RealGUIDE.
IML SA
IML SA
Implant components for implant planning and guided surgery in RealGUIDE.
Implant Club
Implant Club
Implant component library with internal hex, universal platform, for RealGUIDE.
Inserta
Inserta
Implant library components for RealGUIDE: digital planning and guided surgery, Profilo P-1 line.
i RES
i RES
Surgical guide components for planning guided implant surgery in RealGUIDE.
ITS Italy
ITS Italy
Implants for guided surgery planning in RealGUIDE; external, internal, conical connections.
Kristal
Kristal
Implant library for RealGUIDE: models for planning and guided surgery.
MED&PLUS
MED&PLUS
Implant library I-PLUS for guided surgery planning in RealGUIDE.
Mode Implant
Mode Implant
Implant and abutment library for guided surgery planning in RealGUIDE.
MSDI
MSDI
Alef, Conix, Til implant components for digital guided surgery planning in RealGUIDE
Multysystem
Multysystem
Implant component library for RealGUIDE planning: two-phase TC/CC and monophasic implants.
NTA Implant
NTA Implant
Digital implant and accessory models for implant planning and surgical guides in RealGUIDE.
Osteo Ti
Osteo Ti
Implant components for implant planning and guided surgery in RealGUIDE
OVERMED
OVERMED
Components for RealGUIDE: digital implant planning and guided surgery with positioning.
PACE
PACE
Implant components for placement planning and surgical guide design in RealGUIDE.
Permedica
Permedica
Implant and abutment library for RealGUIDE: Exactive conical (Morse), Prosystem internal hex.
Prodent
Prodent
Implant library for implant planning and guided surgery in RealGUIDE.
Refirm
Refirm
IntEssence dental implant system components for RealGUIDE: implants, prosthetics, tools, titanium.
RESISTA
RESISTA
Implant library for surgical planning in RealGUIDE; hex, conical, Morse, trilobe connections.
RESISTA BANP
RESISTA BANP
RealGUIDE library for guided surgery planning, 5° Morse taper connection.
R Medical
R Medical
Titanium Grade 4/5 implant models for digital planning and guided surgery in RealGUIDE.
Surgikor
Surgikor
Implants with hexagonal connection for planning and guided surgery in RealGUIDE.
TFI System
TFI System
Titanium implant library components, internal hex connection, for RealGUIDE surgical planning.
TIRADIX
TIRADIX
Dental implant components, SLA surface, for guided surgery planning in RealGUIDE.
Victory
Victory
Implant components for digital planning and surgical guide workflows in RealGUIDE.
WIN Implant
WIN Implant
Implant library, internal hex, Ø3.75 mm platform, Grade 4 titanium, for RealGUIDE.
Dentalbiolux
Dentalbiolux
Quint line tooth library for full dentures in exocad DentureCAD.
Leonardo Dental Solutions
Leonardo Dental Solutions
Teeth library for exocad Full Denture and DentureCAD, printing and milling support
YUWEI
YUWEI
Tooth library for exocad Full Denture and DentureCAD, 22 moulds.
BEGO
Conical MultiPlus SCXRSX CC
Implant library for exocad with conical MultiPlus interface, SCX/RSX CC configuration.
Cowellmedi
Int W Ti S10 conid
Implant library, Internal W platform, S10 conid configuration, for exocad.
Cowellmedi
Sub R CMT S11 conid
Connection library providing digital interface geometry for implant restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 75105
Cemented abutment component for UF Submerged platform in exocad implant module.
DIO
UF Sub Digital ABT DMR 3555
Abutment library, UF Submerged DMR 3555, for crowns and bridges in exocad.
Glidewell/Hahn
INC IOSSA
Implant library with IOSSA scanbody geometry for implant-supported restoration design in exocad.
Glidewell/Hahn
MU
Multi-Unit abutment library for screw-retained restorations on angled and straight platforms, exocad.
DTLab
DTLab.2
Tooth anatomy library with reference shapes for crowns, bridges and restorations in exocad.
Expression
Expression S3
Tooth anatomy library for exocad, softened occlusal relief, crowns and bridges.
Hilton
Hilton Riquieri N2
Anatomical tooth library for exocad with reference morphology for crowns, bridges, full-anatomy restorations
Peak
Peak Point - Unique
Tooth anatomy library for exocad with distinctive morphology for crowns and bridges.
Pogarskiy
Pogarskiy Design 1.0
Tooth anatomy library, initial morphologies for crowns and bridges in exocad.
Pogarskiy
Pogarskiy Design 3.1
Tooth anatomy library for exocad: crowns, bridges, full-contour restorations, natural forms
Pogarskiy
Pogarskiy Design 3.3
Tooth anatomy library for exocad DentalCAD: crowns, bridges, full-contour restorations.
Zirkonzahn
Zirkonzahn Phonares Bold Universal
Tooth anatomy library for exocad with expressive, pronounced forms for prosthetic work.
Matt Roberts
elmat
Tooth anatomy library for exocad: reference shapes for crowns, bridges, monolithic restorations.
ZRS
zrs42 ua F32 + 04 up-L
Anatomical tooth library for upper left segment, reference shapes for exocad DentalCAD.
ZRS
zrs49 ua M07 + 08 up-L
Anatomical tooth library M07/08, upper left jaw, crown modeling reference for exocad.
ZRS
zrs53
Tooth anatomy library for exocad DentalCAD: reference shapes for crowns, bridges, full-anatomy restorations.
Anthogyr
Anthogyr-Labside-Temp-Monobloc-DT
Temporary monobloc component geometry for provisional restorations, DT interface, exocad.
BEGO
CADBar 0 7
Bar geometry library for implant-supported restoration design in exocad DentalCAD.
BEGO
Provisorischer Aufbau stock
Standard temporary abutment library for designing provisional restorations in exocad.
Thommen
Milling Abutment peek ScanAb
PEEK ScanAb geometry for designing custom milling abutments in exocad.
Grin
Grin Design 6
Tooth anatomy library with reference shapes for modeling crowns and full-anatomy restorations in exocad.
Ivoclar
IVOCLAR-S82
Anatomical tooth library for exocad DentalCAD: reference morphology for crowns, bridges, restorations.
ZRS
zrs59
Tooth anatomy library with reference morphologies for crowns and bridges in exocad.
Bilimplant
BoneLevel
Bone Level implant library for surgical planning in exoplan.
Bioservice
Matrix InthEx S
Short implant library with internal hex connection for exoplan.
Izenimplant
Zenex Multi T
Planning library for tapered submerged implant, digital positioning in exoplan.
Fair Implant
Fair Implant
RealGUIDE components for implant planning and guided surgery, FairOne and FairTwo systems
BEGO
CADAbut 0 6 NH
Abutment library with NH connection for designing custom restorations in exocad.
Cowellmedi
Sub R Lock Ti
Implant library with titanium interface for cemented and screw-retained restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 75205
Cementable stock abutment SSCA 75205 library for restoration modeling in exocad.
Nucleoss
TiBase
Ti-Base library for exocad: designing crowns and bridges on titanium base
DTLab
DTLab.9
Tooth anatomy library for exocad, reference crown morphology for restorative modeling
Pogarskiy
Pogarskiy Design 5.4
Tooth anatomy library for exocad: reference shapes for crowns, bridges, full-anatomic work.
RAINBOW
RAINBOW
Tooth anatomy library for exocad: reference morphologies for crowns, bridges, restorations.
RAINBOW
RAINBOW 40 Green Original
Tooth anatomy library, Green morphology, for crowns, bridges, restorations in exocad.
ZRS
zrs47 ua M05 + 58 up-L
Anatomical tooth library for exocad: M05 morphology, form 58, upper left.
BEGO
CADAbut 1 4 D
Abutment library for exocad: digital base for designing implant-supported crowns and bridges.
BEGO
CADAbut 6 1 D
Titanium base library with 6.1 D platform interface for exocad implant design.
BEGO
Conical PMB SCRSX CC
Implant library for the conical PMB interface, SCR/SX CC configuration, exocad.
Bicon
scanbody bicon 22big
Scanbody for 2.2 platform, detects implant position and axis in exocad
Cowellmedi
Int W Ti S06 conid
Titanium base support geometry for implant restorations, S06 conid connection, exocad.
Cowellmedi
Sub N CMT S11 conid
Implant interface, conical connection, conid variant, for designing implant restorations in exocad.
Cowellmedi
Sub R DA S11 conid
Implant library with Sub R DA S11 conical connection for exocad.
DIO
UF Sub Cemented ABT SSCA 75504
Cemented abutment SSCA 75504 geometry for exocad implant module modeling.
Glidewell/Hahn
EV IOSDP
Implant library for exocad with system geometry, for designing implant-supported restorations.
CTD
CTD4
Tooth anatomy library for exocad: alternative morphologies for crowns, bridges, full-contour restorations.
Expression
Expression T2
Tooth anatomy library for exocad, balanced moderate morphology for crowns, bridges.
Grin
Grin Design EUS
Tooth anatomy library for exocad: reference morphologies for modeling crowns and bridges.
HZL
HZL 1
Tooth anatomy library for exocad DentalCAD; base for modeling crowns and restorations.
Jan
Jan Haito F7
Tooth anatomy library for exocad, feminine morphology, reference for crowns and bridges
Jan
Jan Hajto F26
Tooth anatomy library based on F26 morphology, starting shapes for crowns and bridges in exocad DentalCAD.
PDL
PDL CatBack1 6.4
Reference tooth morphologies as starting shapes for crowns and restorations in exocad.
Other
Reduced Lowerjaw
Lower jaw tooth anatomy library with reduced occlusal relief for exocad DentalCAD.
Smeiga
Smeiga 01
Tooth anatomy morphology library, reference for crowns, bridges and full-contour restorations in exocad.
ZRS
zrs28 ua F18 + 54 up-L
Reference tooth anatomy, upper F18 morphology, variant 54 left, for exocad.
ZRS
zrs57
Tooth anatomy library for exocad DentalCAD, morphological reference for crowns, bridges, restorations.
Adin
TMA multiunit
Multi-Unit components for designing screw-retained restorations on multi-unit abutments in exocad.
Anthogyr
Anthogyr-Labside-Flexibase-MDT
Flexibase MDT implant library for implant-supported prosthetic design in exocad.
Anthogyr
Anthogyr-Labside-Temp-Abutment-MDT
Temporary abutment geometries for provisional implant-supported restorations, MDT interface, exocad.
Anthogyr
Labside MDT
Implant library for exocad to design implant-supported dental restorations.
BEGO
CADAbut 1 4 DO
Abutment library for prosthetic modeling on BEGO implants in exocad.
BEGO
PS TiB SCSCXRSRSXRI
Implant library with PS interface for designing crowns and bridges in exocad.
BEGO
scanbody bridge BEGO 06
Scanbody geometry for multi-implant bridge restorations in exocad DentalCAD
Cowellmedi
Int W DA S10 conid
Internal conical connection interface library, Wide platform, for exocad implant module.
DIO
UF Sub Cemented ABT SSCA 75207
Cementable stock abutment, UF Submerged geometry for crowns and bridges in exocad.
DIO
UF Sub Hybrid Link UFHL 55702
Link geometry library for implant-supported restorations on UF Sub Hybrid platform in exocad.
DIO
V4mkr-TiBase DIO-UF2
Ti-Base geometry for V4mkr platform, UF2 interface, restoration modeling in exocad.
Nucleoss
T6 TS MU TiBase
Implant library with Multi-Unit and Ti-Base components for screw-retained restorations in exocad.
DTLab
DTLab.29
Anatomy library for exocad DentalCAD: tooth morphologies as references for crowns, bridges, restorations.
Expression
Expression D1
Tooth anatomy library with reference morphologies for crowns and bridges in exocad.
FOBOS
FOBOS-Amalthea
Tooth anatomy library with natural morphologies, reference for crowns, bridges in exocad.
Grin
Grin Design JS
JS-style tooth anatomy library: reference shape for crowns and bridges in exocad.
Other
HTR
Tooth anatomy library for exocad DentalCAD, reference morphologies for crowns, bridges and full-contour restorations.
Other
White Lady
Tooth anatomy library with feminine morphology for modeling crowns and restorations in exocad.
ZRS
ZRS 01
Tooth anatomy library for exocad, characteristic morphology for crowns, bridges, restorations.
Ao N Implants
Cyroth CC
Implant library with Cyroth CC connection for digital planning in exoplan.
Ao N Implants
Cyroth IH
Dental implant library with internal hex connection for exoplan planning.
Ao N Implants
Cyroth Short IH
Short cylindrical implants with internal hex connection for exoplan planning.
Ao N Implants
Cyroth Short IH
Short implant library with internal hex connection for exoplan planning
Ao N Implants
Is Four IH
Is-Four bone-level implants with internal hex connection for exoplan planning.
Bilimplant
kit
Surgical kit library for implant planning in exoplan software.
Bilimplant
sleeve
Surgical sleeves for guided implant surgery template design in exoplan.
Bio 3 Implants
Progressive
Library of conical bone-level titanium alloy implants for exoplan planning.
Bio Micron
BSC
BSC series tissue-level implant library with internal connection for exoplan.
Bio Micron
ICI SinOcta
Implant library for exoplan planning, internal octagonal Octa connection.
Bio Micron
TWS
TWS implant library for surgical planning in exoplan software.
Bioservice
Matrix InthEx T
Implant library with internal hex connection for exoplan surgical planning.
Dentin
Rapid
Implant library for exoplan; suited to varied bone types and augmentation.
Derig
Biodent HEX
Implant library with external hex connection for planning in exoplan.
Derig
Bioneck TRI
Library of conical implants with internal triple-channel connection for exoplan planning.
Derig
kit
Surgical guide library for exoplan; guided surgery design with fully/partially guided support.
DSP
Biomedical CMI Soulfit
Library of cylindrical implants with platform switching for exoplan planning.
Etgar
MAX
Implant system library for surgical planning in exoplan, self-tapping design.
FMD-Dental
Uni Qo Pro Cylindrical
Implant library with cylindrical internal connection for planning in exoplan.
FMD-Dental
kit
Surgical guide library for exoplan, sleeve kit for guided surgery.
FMD-Dental
nanofix Adapt A
Implant system planning library with compatible components for exoplan.
FMD-Dental
nanofix Pro Cylindrical
Cylindrical implant library, nanofix PRO line, for planning in exoplan
Implant
Logistics ImplantOne500
Implant library for exoplan implant planning, FDA variant, 500 series.
Implatech
ImplatechOne Short
Short implant library, internal hex connection, for digital planning in exoplan.
Implatech
ImplatechOne
Root-form dental implant system library for surgical planning in exoplan.
Isystem
20Well inarrow
Implant system library for digital implant placement planning in exoplan.
Isystem
25Well imax
Implant library for digital implant placement planning in exoplan software.
Isystem
30Well
Implant system library for guided implant placement planning in exoplan.
Izenimplant
Zenex Multi R
Implant library with internal conical Morse taper connection for exoplan planning
Kinetical
Spirit CC
Standard conical implant library for exoplan, partially guided workflow supported.
Logon
LOGON
Implant library for implant planning in exoplan; third-party, 19 implants.
MEDENS
ColossoEvolution HI
Implant library for surgical planning in exoplan; connection type unspecified.
MEDENS
NovoColosso CM
Implant library with Cone Morse conical connection for exoplan planning.
Multysystem
CC 10 NST
Two-stage CC implant library, NST New Standard platform, for exoplan planning.
Multysystem
CC 10 P NST
Implant library for exoplan; implant planning with fully guided workflow support.
Multysystem
CC 10 PS NST
Two-stage implant library with platform switching, New Standard Extra Short, for exoplan
Multysystem
CC 10 PS ST
Two-phase CC implant library, conical Platform Switching connection, for exoplan planning.
Notch
Short
Short line implant library for treatment planning in exoplan, five positions.
Notch
Smart
Implant library of the Smart system for implant planning in exoplan.
Notch
Unique
Implant library with internal hexagon connection for implant planning in exoplan.
NTA
NTA
Implant library for digital planning in exoplan, conical Morse taper connection, titanium.
ONEDAYBIOTECH
MT ACT
Implant library for exoplan planning; FDA-marked products, connection type not specified.
ONEDAYBIOTECH
S
Implant system library for digital implant planning in exoplan.
ONEDAYBIOTECH
S
Fixture implant library for exoplan; FDA-cleared, fully guided workflow except Ø6.0/Ø7.0.
Solvo UK
PremiumMini SLA
Implant library for surgical planning in exoplan, includes five positions.
Solvo UK
PremiumStandard SLA
Implant library for planning placement and selecting compatible components in exoplan.
Surgikor
Fixation Conical
Conical root-form implant, platform-switch, deep conical connection; implant planning in exoplan, FDA version.
Surgikor
Solution Conical
Implant library, conical Morse taper connection, for planning in exoplan, FDA-marked.
Tree Oss
kit
Surgical guide library for planning guided surgery in exoplan.
ACH Medical
ACH Medical
Titanium implants, internal hexagon connection, for RealGUIDE planning and surgical guides.
Ao N
Ao N
Digital components for planning guided endosseous dental implant placement in RealGUIDE.
Biologitech
Biologitech
Dental implant library for guided surgery planning in RealGUIDE; unified connection, two threads.
CELL Implant
CELL Implant
Implant components for planning and surgical guides in RealGUIDE, titanium Grade 4.
GLOBALWIN
GLOBALWIN
Implant planning and surgical guide components for RealGUIDE guided surgery protocol.
Kalodon
Kalodon
Dental implant library with internal hex connection for planning in RealGUIDE.
Mc Bio
Mc Bio
Implant and abutment components for placement planning in RealGUIDE.
Mech&Human
Mech&Human
Implant and abutment components for planning and surgical guides in RealGUIDE.
Medical Plant QP
Medical Plant QP
Implant components library for implant planning and surgical guide design in RealGUIDE.
MESA
MESA
Implant component library for guided surgery digital planning in RealGUIDE.
Mete'
Mete'
Implant components with external hexagon connection for RealGUIDE surgical planning.
Oitech
Oitech
Implant system components for guided surgery planning in RealGUIDE.
BEGO
CADBar 1 2
Implant bar geometries with interface data for designing implant-supported restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 45105
Abutment library for cemented restorations on UF Sub platform, exocad.
Implant Direct
DIRECTscan DIRECTarch
Scan flags and full-arch workflow library for exocad, arch-level restoration design.
Other
Edwin
Tooth anatomy library for exocad: reference shapes for designing crowns and bridges.
Expression
Expression G1
Tooth anatomy library for exocad DentalCAD, shaping full-contour crowns and bridges.
Marcelo
Marcelo Almeida MC2
Tooth anatomy library for exocad: coordinated morphologies for modeling crowns and bridges.
Other
Studies
Tooth anatomy library, reference morphology for crowns and restorations in exocad.
Zirkonzahn
zirkonzahnSAO
Tooth anatomy library for exocad, compact occlusion, reference for crowns and bridges
ZRS
zrs00
Anatomical tooth library for exocad, neutral shapes for crowns, bridges, restorations
ZRS
zrs19 ua F09 + 04 up-L
Upper left tooth anatomy library for crown and bridge modeling in exocad
AB Dental
Direct on MU
Multi-Unit geometries for screw-retained bridges and full-arch frameworks in exocad.
BEGO
CADAbut 0 7 D
Abutment geometry for modeling restorations in the exocad DentalCAD implant module.
BEGO
CADAbut 2 1 F
Implant library with interface geometry for restoration modeling in exocad.
Cowellmedi
Sub N Ti A S11 conid
Implant library, Submerged Narrow connection, Ti A S11 configuration, for exocad.
Cowellmedi
Sub R MU Bar 45 conid
Multi-Unit and bar components for screw-retained frameworks, 45° conical platform, exocad.
DIO
UF Sub Cemented ABT SSCA 45207
Subgingival cemented abutment geometry, UF connection, for exocad DentalCAD.
DIO
UF Sub Cemented ABT SSCA 65104
Abutment geometry for cemented restorations on UF Submerged platform, exocad.
DIO
UF Sub Digital ABT DPR 4570
Abutment library, UF Submerged DPR 4570 platform, for prosthetic design in exocad.
DIO
UF Sub Hybrid Link UFHL 55701
Implant library with Link geometry for modeling restorations in exocad.
Euroteknika
IboneE IboneS Naturactis NateaPlus NaturallPlus
Implant geometry library covering several families for restoration design in exocad.
Other
B.Deloge
Tooth anatomy library for exocad DentalCAD: reference morphologies for modeling crowns and restorations.
CTD
CTD2
Tooth anatomy with alternative morphologies for modeling crowns and restorations in exocad.
Expression
Expression T1
Tooth anatomy library with pronounced relief morphology for crown modeling in exocad.
Lorant
Lorant Stumpf 02
Tooth anatomy set with alternative cusp morphology, master form for exocad DentalCAD.
Smeiga
Smeiga 04
Anatomical tooth-shape library for modeling crowns, bridges and restorations in exocad.
Tribos
Tribos - 2
Second volume tooth anatomy for exocad: crown, bridge, full-anatomy morphologies.
robtoly
robtoly-oval
Tooth anatomy library with oval contour, reference morphology for crowns and bridges in exocad.
ONEDAYBIOTECH
Mini
Mini implant library for digital implant planning in exoplan.
Veritas Bioventions
WaneCore
Implant library with conical Morse taper connection for exoplan planning
3 Dveterinaria
3 Dveterinaria
Veterinary implant components for digital planning and guided surgery in RealGUIDE.
Altracore
Altracore
Renova implant system components for digital planning and guided surgery in RealGUIDE.
Anteea
Anteea
Implant and prosthetic component library for digital planning and guided surgery in RealGUIDE.
Little Implant Co
Little Implant Co
Implant library for digital planning and guided surgery in RealGUIDE.
SHAKLETON
SHAKLETON
Implant library components for digital implant planning and guided surgery in RealGUIDE.
Nothing found