Anthogyr
Anthogyr-Labside-XBase-SA
Implant library for exocad DentalCAD, Labside XBase SA interface geometry for restorations
Free libraries — exocad DentalCAD — Implants
439 libraries
BEGO
CADAbut 8 2 DO
Prosthetic abutment geometry library for planning restorations in exocad.
BEGO
CADBar 8 1 AN
Implant library for exocad with CADBar 8/1 AN geometry for restorations.
DIO
UF Sub Cemented ABT SSCA 65505
Cemented abutment component for UF Submerged platform, restoration design in exocad.
Anthogyr
Anthogyr-Labside-Temp-Monobloc-MDT
Temporary monobloc component geometry for provisional restorations on MDT interface, exocad.
Anthogyr
Labside SA
exocad implant library with platform geometry for designing implant-supported restorations.
BEGO
CADAbut 0 1 D
Implant geometry for designing restorations on CADAbut interface in exocad.
BEGO
CADAbut 0 5 F
Abutment library for exocad DentalCAD, designing restorations on BEGO interface.
Cowellmedi
Sub R Ti A S06 conid
Implant library for exocad, Submerge R platform, S06 conical connection.
DIO
UF Sub Cemented ABT SSCA 55407
Abutment library for cement-retained restorations, UF Submerged platform, exocad.
DIO
UF Sub DIgital ABT DUR 4570
Digital abutment library for UF Submerged system, implant crown and bridge design in exocad.
Paltop
MUA
Multi-Unit abutment implant library for exocad: screw-retained bridges and full-arch restorations
BEGO
Esthetic TTiA NH SCSCXRSRSXRI stock
Implant library for exocad, restoration design on Esthetic connection interface.
DIO
UF Sub Digital ABT DPR 1555
Abutment library with UF Sub Digital connection for exocad, single crowns and bridges
DIO
UF Sub Hybrid Link UNHl 40552
Link geometry library for hybrid abutment, UF Submerged platform, exocad.
DIO
UF Sub Regular Hex CA
Implant library for exocad: Submerged regular platform, hexagonal engaging interface, restorations.
Dentaurum
tioLogic
Implant library for exocad providing geometry for prosthetic component positioning.
Nucleoss
T6 Premil Yenamak
CAD library for exocad DentalCAD: premill titanium blank geometry, T6 implant system, prosthetic superstructures.
Anthogyr
Abutments centralized-milling
Abutment library for centralized milling, Anthogyr connection, for exocad DentalCAD.
Bicon
SHORT FDUA ImplantLevel
Implant-level reference geometry for restorations with FDUA components in exocad.
DIO
UF Sub Cemented ABT SSCA 75104
Cemented abutment geometry for designing restorations on UF Submerged platform in exocad.
DIO
UF Sub Cemented ABT UNSCA 40405
UF platform abutment geometry for cemented restorations in exocad implant module.
Cowellmedi
Sub R MU Bar 55 conid
Multi-Unit and bar components library, 55° conical platform, screw-retained frameworks, exocad.
DIO
UF Sub Cemented ABT SSCA 65205
Cementable abutment library for designing crowns and bridges in exocad.
DIO
UF Sub DIgital ABT DUN 3570
UF Submerged digital abutment library for modeling crowns and bridges in exocad
DIO
UF Sub Hybrid Link UFHL 45501
Link geometry library for seating crowns and bridges on titanium base, exocad.
DIO
UF Sub Hybrid Link UFHL 55401
Hybrid Link geometry for modeling implant restorations on UF Sub platform, exocad.
AB Dental
SP NP Direct
Implant library for exocad, direct-to-implant screw-retained restorations on SP NP platform without Ti-Base.
Alpha-Bio
Tec TCT-N
Implant library for exocad with TCT-N connection for implant-supported restorations.
Anthogyr
Anthogyr-Labside-Preface-MDT
Preface MDT interface geometries for positioning implant-supported restorations on scans in exocad DentalCAD.
BEGO
CADAbut 0 1 F
Implant geometry for designing crowns and small bridges in exocad.
BEGO
CADAbut 1 1 F
Abutment interface library for designing implant-supported restorations in exocad.
BEGO
Esthetic CADCAM SCSCXRSRSXRI
Implant library for exocad DentalCAD, SCSCXRSRSXRI interface geometry for restoration design.
DIO
UF Sub Cemented ABT SSCA 45404
Cemented abutment geometry, UF Submerged platform, DIO interface, for exocad.
DIO
UF Sub Cemented ABT SSCA 65404
Cemented UF Submerged abutment geometry for modeling crowns and bridges in exocad.
Thommen
DyTi-Base PF 3 5 Coated Captive Screw
Ti-Base library, coated variant with captive screw, PF 3.5 platform, for exocad.
Anthogyr
Anthogyr-Labside-Preface-SA
Preface SA interface geometry positioning restorations relative to implant in exocad
BEGO
CADAbut 3 2 D
Abutment geometry library for designing restorations on this interface in exocad DentalCAD.
Cowellmedi
Sub R BTU S06 conid
Implant library with conical connection reference geometry for restorations in exocad.
DIO
UF Sub Digital ABT DPR 3570
Abutment library for exocad, UF Submerged digital protocol, size 3570, implant-supported restorations.
Paltop
ACS
ACS implant library for designing implant-supported restorations in exocad DentalCAD.
Thommen
DyTi-Base PF 5 0 PEEK Captive Screw
PEEK Ti-Base library, PF 5.0 platform, captive screw retains prosthetic screw, exocad.
Adin
Dir Con To Implant
Direct-to-implant connection geometries for crowns, abutments and hybrids in exocad.
BEGO
CADBar 3 4 AN
Implant library for exocad DentalCAD with bar geometry and correct connection.
Bicon
SHORT UA Stock Abutment stock
Stock Universal Abutment geometry for restorations on standard UA in exocad.
DIO
UF Sub Cemented ABT UNSCA 40205
Cemented abutment CAD geometry, UF Submerged platform, implant-supported crown modeling for exocad.
DIO
UF Sub Hybrid Link UFHL 45403
Implant library with Link geometry for modeling restorations on titanium base in exocad.
BEGO
MultiPlus System SSCSCXRSRSXRI
Implant library for MultiPlus platform with CAD geometries for implant-supported restorations in exocad.
DIO
UF Sub Digital ABT DMR 2540
Abutment geometry, UF Submerged DMR 2540 platform, for exocad implant module.
Paltop
Int Hex TiBase Round
Ti-Base library for internal hexagon connection, round version, exocad DentalCAD.
BEGO
CADAbut 0 7 F
Preformed abutment library for designing implant-supported restorations in exocad.
BEGO
CADAbut 1 1 D
Implant library for exocad with abutment geometry for modeling implant-supported restorations.
DIO
UF Sub Cemented ABT UNSCA 40607
Abutment geometry for cemented restorations on UF platform in exocad.
DIO
UF Sub Digital ABT DPR 1540
Abutment geometry with UF Sub interface for implant-based restoration design in exocad.
Glidewell/Hahn
EV LABDP
Implant library for exocad, EV LABDP connection, implant-supported prosthetic design geometry.
Implant Direct
Temp Non Engaging Abutments
Temporary non-engaging abutment geometry for exocad, Non-engaging and FDA variants.
Thommen
DyTi-Base PF 5 0 Coated Captive Screw
Coated Ti-Base abutment, PF 5.0 platform, captive screw, for exocad
Anthogyr
Anthogyr-Labside-Flexibase-SA
Ti-Base library for implant-supported prosthetic restorations in exocad.
BEGO
CADAbut 0 1 NH
Implant geometry for designing cement- and screw-retained restorations in exocad
BEGO
Esthetic CADCAM NH SCSCXRSRSXRI
Implant library for exocad DentalCAD, Esthetic CADCAM NH interface, platforms SC, SCX, RS, RSX, RI.
BEGO
Semados Pre-milled SCSCXRSRSXRI
Pre-milled blank library for designing custom abutments and screw-retained restorations in exocad.
Cowellmedi
Sub N DA S11 conid
exocad implant library, Submerged Narrow platform, conical DA S11 connection geometry.
DIO
UF Sub DIgital ABT DCR 2570
Abutment library for exocad, DIO UF Submerged connection, implant-supported crowns and bridges.
DIO
UF Sub Hybrid Link UNHl 40402
Link geometry library for hybrid abutment base, UF Submerged platform, exocad.
Paltop
Conical TiBase Round
Ti-Base geometry for conical connection with round non-antirotation interface, exocad
BEGO
CADBar 5 1
Implant library for exocad with geometry for designing implant-supported restorations.
Cowellmedi
Sub N Ti S11 conid
exocad implant library, Sub N S11 conid interface, conical connection for restorations.
DIO
UF Sub Cemented ABT SSCA 45107
Subgingival cemented abutment; exocad library for modeling crowns on it.
DIO
UF Sub Cemented ABT UNSCA 40507
Cemented abutment library for crown modeling in exocad DentalCAD.
DIO
UF Sub DIgital ABT DLN 5570
Digital abutment library for exocad, modeling crowns, bridges, custom suprastructures.
Glidewell/Hahn
NB-AC
Implant library for exocad with NB-AC interface, single and bridge restorations.
Glidewell/Hahn
NB-RP
Implant library for exocad with NB-RP interface geometry for restorations
Thommen
Milling Abutment
Millable abutment library for designing custom abutments on implants in exocad.
BEGO
Conical TiA SCRSX CC stock
Implant library with conical connection for restoration modeling in exocad DentalCAD.
DIO
UF Sub Cemented ABT SSCA 55205
Cemented abutment library, UF Submerged platform, for restoration modeling in exocad.
DIO
UF Sub Cemented ABT SSCA 65405
Cemented abutment geometry, UF Submerged platform, for exocad crown and bridge design
DIO
UF Sub DIgital ABT DLN 3570
Abutment library with UF Sub connection for designing restorations in exocad
DIO
UF Sub DIgital ABT DUN 5570
Digital abutment library with geometry for modeling implant-supported restorations in exocad.
DIO
UF Sub Digital ABT DMR 2570
Digital submerged protocol abutment geometry, size DMR 2570, for exocad restorations.
DIO
UF Sub Digital ABT DMR 4570
Implant library with UF Submerged abutment geometry, DMR 4570 platform, for exocad.
Nucleoss
Angled TiBase
Angled Ti-Base geometries for designing crowns and small bridges with angle correction in exocad.
Adin
TMA-MU multiunit support
Multi-Unit geometry library for TMA platform, screw-retained restorations in exocad.
Adin
Temporary Library
Temporary component library for provisional restorations on implants, exocad DentalCAD
Adin
Ti-base CloseFit UNP-NP
Ti-Base geometry with CloseFit UNP-NP interface for crowns and bridges in exocad.
Anthogyr
Anthogyr-Labside-Temp-Abutment-DT
Temporary abutment with component for provisional restorations on Preface DT interface in exocad.
Anthogyr
Anthogyr-Labside-XBase-MDT
Labside XBase MDT geometry library for designing implant-supported restorations in exocad.
BEGO
scanbody BEGO-SCRC 113small
Scanbody library for exocad, defines digital implant position reference, 113 small variant.
Cowellmedi
Sub N DA S06 conid
Implant library, DA S06 configuration, Submerged Narrow platform, conical connection, for exocad.
Cowellmedi
Sub R BTU S11 conid
Implant library for exocad with conical interface for implant-supported restorations.
DIO
UF Sub Cemented ABT UNSCA 40505
Cemented abutment geometry on UF platform for restoration design in exocad
DIO
UF Sub Digital ABT DPR 2555
Abutment geometry, UF Sub Digital connection, article DPR 2555, single crowns and bridges, exocad.
Adin
Ti-base Int-Hex Coni-Con
Ti-Base geometry with Internal Hex Coni-Con connection for crowns and bridges on titanium base, exocad.
BEGO
CADAbut 5 2 NH
Abutment library for exocad, implant interface geometry, 5.2 NH platform
Cowellmedi
Sub R Ti S06 conid
Implant library for exocad DentalCAD, Submerge R interface, S06 variant, conical connection.
DIO
UF Sub DIgital ABT DUN 2570
Digital abutment library for designing implant-supported restorations in exocad DentalCAD.
DIO
UF Sub Digital ABT DMR 4540
UF Submerged abutment library, DMR 4540 platform, crown and bridge modeling in exocad.
DIO
UF Sub Hybrid Link UFHL 55502
Implant library with Link geometry for UF Sub Hybrid in exocad DentalCAD.
Glidewell/Hahn
IOSSA
Implant library with IOSSA connection geometry for designing implant-supported restorations in exocad.
Anthogyr
Anthogyr-Labside-HealFit-SH-BL
Geometry library for laboratory bone-level implant restorations, HealFit connection, exocad.
BEGO
CADBar 8 1
Implant library for exocad DentalCAD, geometry for designing implant-supported restorations.
Cowellmedi
Sub RN MU DA 45
Angled 45° Multi-Unit interface for full-arch prostheses on MU abutments, exocad.
DIO
UF Sub Cemented ABT SSCA 45304
Cemented abutment geometry library, UF Submerged platform, for exocad implant CAD.
DIO
UF Sub Cemented ABT SSCA 45505
Cemented abutment library with digital geometry for restoration design in exocad.
DIO
UF Sub Cemented ABT SSCA 55405
Cement-retained abutment CAD geometry, UF Submerged platform, for exocad DentalCAD.
DIO
UF Sub Cemented ABT SSCA 75407
Cemented abutment library for modeling crowns and bridges in exocad, SSCA platform.
Glidewell/Hahn
TAPERED
Tapered-connection implant library for designing prosthetic restorations in exocad
Adin
Ti-base Touareg-Swell RS
Ti-Base interface geometry for modeling implant crowns and bridges in exocad.
DIO
UF Sub Cemented ABT UNSCA 40207
Cementable UF Submerged abutment geometry for building restorations in exocad.
DIO
AQ-TiBase DIO-UF2
Ti-Base geometry, AQ system, UF2 interface, for crowns and bridges in exocad.
Thommen
DyTi-Base PF 3 5 PEEK Removable Screw
Ti-Base geometry for implant restorations on PEEK base, removable screw, exocad.
Thommen
VARIOmulti Gen1 multiunit
First-generation Multi-Unit library for screw-retained restorations on Gen1 platform, exocad.
BEGO
CADAbut 5 2 D
Abutment library for exocad DentalCAD, CADAbut 5.2 D interface, implant restoration design.
BEGO
CADBar 0 7 MultiPlus
Implant library with CAD-bar geometry and MultiPlus interface for exocad.
BEGO
CADBar 17 1 AN
Implant interface library for exocad, anti-rotational geometry for single-tooth restorations
DIO
UF Sub Cemented ABT SSCA 65407
Cemented abutment geometry for UF Submerged platform; crowns and bridges in exocad.
DIO
UF Sub DIgital ABT DLN 3555
Abutment for implant-supported restorations, UF Sub platform, for exocad.
DIO
UF Sub DIgital ABT DUR 2570
Abutment geometry, UF Submerged platform, for implant-supported restoration design in exocad.
DIO
UF Sub DIgital ABT DUR 5555
Digital abutment geometry, UF Submerged platform, configuration 5555, for exocad.
DIO
UF Sub Hybrid Link UNHl 40551
Link library for UNHl hybrid base on UF Submerged platform, exocad.
Glidewell/Hahn
ZI
Implant library for exocad DentalCAD with ZI connection geometry for restorations.
Implant Direct
Smart Base Cylinders
SmartBase cylinder geometry as support for implant-supported restorations in exocad.
Nucleoss
MU TiBase
Multi-Unit and Ti-Base geometries for single crowns and screw-retained bridges in exocad.
Thommen
DyTi-Base PF 4 5 PEEK Captive Screw
Ti-Base geometry for crowns and small bridges, PF 4.5 platform, captive screw, exocad
BEGO
CADAbut 3 3 D
Implant library for exocad, 3.3 D platform geometry, designing crowns and bridges
DIO
UF Sub Cemented ABT SSCA 55104
Cemented UF Submerged abutment geometry library for implant modeling in exocad.
DIO
UF Sub Cemented ABT UNSCA 40605
Cemented abutment component, UF platform, for restoration planning in exocad.
Glidewell/Hahn
NEO
Implant library for exocad DentalCAD, NEO connection, designing implant-supported restorations.
Paltop
Ti-Temp
Temporary component geometry for designing implant-supported provisional restorations in exocad.
BEGO
CADAbut 0 5 D
Abutment geometry library for planning implant-supported crowns and bridges in exocad.
BEGO
CADBar 16 1
Implant library for exocad, BEGO CADBar 16 connection geometry for prosthetic restorations.
Bicon
SHORT UA Custom Abutment LP
Library for designing custom low-profile abutments for SHORT implants in exocad.
DIO
UF Sub Cemented ABT UNSCA 40105
Abutment geometry for exocad, designing cemented crowns on UF Submerged implants.
Glidewell/Hahn
STR
Implant library with STR interface for restoration design in exocad.
AB Dental
MU-P64
Multi-Unit MU-P64 geometries for screw-retained crowns and bridges in exocad.
BEGO
CADBar 1 1
Implant geometry library for designing bar-supported restorations in exocad
BEGO
CADBar 3 2
Bar geometries for implant restorations in exocad DentalCAD, BEGO implant interface.
Cowellmedi
Sub R ANG S06 conid
Implant library defining angled conid connection interface for exocad restorations.
DIO
UF Sub Digital ABT DMR 3540
Submerged abutment library, DMR 3540 size, for modeling crowns and bridges in exocad.
DIO
UF Sub Hybrid Link UFHL 45701
Implant library with Link geometry for modeling crowns and bridges in exocad.
Anthogyr
Anthogyr-Labside-XBase-DT
Ti-base geometries for designing implant-supported restorations on DT interface in exocad
Anthogyr
SRBB centralized-milling
Implant geometries with SRBB interface for centralized-milling implant restorations in exocad
BEGO
CADAbut 3 3 NH
Implant library for exocad DentalCAD: abutment geometry, non-hex connection, restoration design.
Cowellmedi
Sub R MU Ti 55
Multi-Unit component for screw-retained restorations on 55° titanium MU abutments, exocad.
DIO
UF Sub Cemented ABT SSCA 55404
Abutment library for cement-retained restorations, UF Submerged platform, exocad.
DIO
AQs-TiBase DIO-UF2
Ti-Base library with AQs UF2 interface for crowns, bridges, hybrids in exocad
Glidewell/Hahn
NB-AC IOSSA
Implant library with NB-AC interface and IOSSA scanbody for exocad.
Thommen
DyTi-Base PF 5 0 Coated Removable Screw
Coated Ti-Base geometry, PF 5.0 platform, removable screw, for exocad.
DIO
UF Sub Cemented ABT SSCA 55207
Cementable UF Submerged abutment library for designing crowns and bridges in exocad.
DIO
UF Sub Cemented ABT SSCA 75507
Abutment geometry for modeling cemented crowns and bridges, SSCA platform, exocad.
DIO
UF Sub Digital ABT DPR 3540
Implant library for exocad DentalCAD with submerged abutment geometry, size 3540.
Noris
MultiUnit
Multi-Unit geometries for screw-retained bridges and full-arch restorations in exocad.
Thommen
PF3 0 VARIOunite
VARIOunite PF3.0 interface library for implant-supported restoration design in exocad.
Anthogyr
Anthogyr-Labside-Preface-DT
Preface DT interface geometry: digital reference aligning restoration to implant in exocad.
BEGO
CADAbut 3 1 F
Abutment library for exocad DentalCAD, 3.1 F platform, designing implant-supported restorations.
BEGO
Conical TTiA SCRSX CC stock
Implant library for exocad, BEGO Conical connection, for crown and bridge design.
DIO
UF Sub Digital ABT DMR 1570
UF Submerged digital-protocol abutment geometry, size DMR 1570, for crowns and bridges, exocad.
DIO
UF Sub Hybrid Link UNHl 40401
Link geometry library for hybrid restorations on UF Sub platform, exocad.
Thommen
DyTi-Base PF 4 5 Coated Removable Screw
Ti-Base geometry, coated 4.5 platform, removable screw, implant crowns and bridges in exocad.
BEGO
CADBar 5 2 AN
Implant library for exocad with geometry referenced when designing restorations
Cowellmedi
Sub N ANG S06 conid
Interface geometry for designing implant restorations on Sub N angled conical connection in exocad.
DIO
UF Sub Cemented ABT UNSCA 40305
CAD form of cemented abutment, UF Submerged platform, for exocad restoration modeling.
Euroteknika
Naturall Natea
exocad library with geometries for implant-supported restorations on two implant lines.
Noris
InternalHex
Implant library with internal hexagonal connection for exocad implant module.
Thommen
VARIOflex temp peek ScanAb
Temporary PEEK scan abutment for designing implant-supported provisional restorations in exocad.
BEGO
CADAbut 1 1 NH
Abutment geometry library for designing implant-supported restorations in exocad.
BEGO
CADAbut 3 1 D
Implant library for exocad DentalCAD, interface geometry for implant-supported restorations
Cowellmedi
Int R Ti S10 conid
Titanium base library for prosthetics on conical connection in exocad
DIO
UF Sub Hybrid Link UFHL 45502
Implant library for exocad with Link geometry, modeling restorations on titanium base.
DIO
UF Sub Hybrid Link UFHL 45703
Link geometry library for exocad, designing implant-supported restorations on the matching interface.
Thommen
Ti-Base
Ti-Base geometry library for designing crowns and abutments in exocad.
Adin
TMA multiunit support
Multi-Unit geometry library for modeling superstructures on MU abutments in exocad.
Anthogyr
Labside DT
Implant library for exocad providing geometry for designing implant-supported restorations.
BEGO
CADAbut 1 2 NH
Abutment library with non-rotating connection for modeling implant restorations in exocad.
BEGO
CADAbut 1 4 F
Abutment library for exocad: positioning crowns and bridges on implant interface.
BEGO
CADBar 11 1
Implant library with CADBar geometry for implant-supported restorations in exocad DentalCAD.
Bicon
SHORT UA Copings stock
Stock coping geometry for crowns on SHORT UA abutments, exocad.
DIO
UF Sub Cemented ABT SSCA 45205
Subgingival cemented abutment, SSCA 45205 connection, abutment library for exocad DentalCAD.
DIO
UF Sub Cemented ABT UNSCA 40107
CAD abutment geometry for cemented UF Submerged connection, exocad crown modeling
DIO
UF Sub Cemented ABT UNSCA 40307
Cemented UF Submerged abutment geometry for exocad, digital fit for implant-supported restoration
DIO
UF Sub Cemented ABT UNSCA 40407
Cemented abutment for designing crowns and small bridges in exocad.
Adin
Ti-Blank Int-Hex Coni-Con
Ti-blank library for exocad with Internal Hex and Coni-Con connections
Anthogyr
Anthogyr-Labside-Temp-Abutment-SA
Temporary abutment for provisional restorations, SA connection, for exocad.
BEGO
CAD-CAM BegoSemados Ti Base
Ti-Base geometries for implant-supported crowns and bridges, BegoSemados connection, exocad.
BEGO
CADBar 6 1
Implant library for exocad DentalCAD with connection geometry for bar-supported restorations.
Cowellmedi
Sub R Ti A S11 conid
Implant library with conical connection, Submerge R S11 platform, for exocad.
Cowellmedi
Sub R Ti B S06 conid
Implant library with Submerge R interface, B/S06 variant, conical connection, for exocad.
Glidewell/Hahn
AS
Implant geometry for designing implant-supported restorations on the AS platform in exocad.
Glidewell/Hahn
NB-RP Hybrid Bar
Bar geometry library on NB-RP interface for implant-supported bar restorations in exocad.
Implant Direct
Smart Base Engaging 6mm
Engaging SmartBase abutment geometry, 6mm height, for exocad implant restoration design
Thommen
DyTi-Base PF 3 5 Coated Removable Screw
Coated Ti-Base geometry with removable screw, PF 3.5 platform, for exocad.
Thommen
DyTi-Base PF 4 5 PEEK Removable Screw
Ti-Base geometry, PF 4.5 platform, removable screw variant, for exocad.
Thommen
VARIOflex temp
Temporary component library for designing provisional implant restorations in exocad.
Adin
TMA-MU
Multi-Unit platform library for screw-retained bridges and full-arch restorations in exocad
Alpha-Bio
Tec IH
IH connection library for implant-supported prosthetic design in exocad.
BEGO
CADAbut 16 1 NH
Implant library for exocad with abutment geometry for implant-supported restorations.
Bicon
SHORT FDUA Stock
Implant library with stock FDUA geometry for restoration positioning in exocad.
DIO
UF Sub Cemented ABT UNSCA 40707
Cemented abutment library for exocad, UF Submerged platform, for crowns and bridges.
DIO
UF Sub Hybrid Link UFHL 55403
Link component geometry library for hybrid restorations on DIO interface, exocad.
DIO
UF Sub Hybrid Link UFHL 55503
Hybrid Link geometry for scan alignment and implant restoration modeling in exocad.
DIO
UF Sub Hybrid Link UNHl 40403
Link interface for UNHl 40403 hybrid base, UF Submerged platform, exocad.
Glidewell/Hahn
INC
Implant library with connection data for restoration design in exocad DentalCAD.
BEGO
CADAbut 16 1 D
Abutment library for exocad, designing restorations on BEGO implant interface
BEGO
CADBar 0 1
Bar geometry library for implant-supported restorations on BEGO interface, exocad
BEGO
MultiPlus multiunit support
Auxiliary Multi-Unit geometries for screw-retained restorations on multi-unit abutments, exocad.
Cowellmedi
Sub N ANG S11 conid
Angled Sub N interface library, S11 conid, for exocad implant restorations.
DIO
UF Sub DIgital ABT DLN 5555
Digital abutment library for single and bridge implant-supported restorations in exocad.
DIO
UF Sub Hybrid Link UFHL 45401
Link component for modeling hybrid superstructures on Submerged Hybrid Link connector, exocad.
Glidewell/Hahn
ANK
Implant library, ANK configuration, for designing implant-supported restorations in exocad.
Glidewell/Hahn
STR-SYN
Implant library with STR-SYN connection for exocad, planning crowns and bridges.
BEGO
CADAbut 0 6 D
Abutment geometry library for exocad implant module, modeling restorations on the component.
BEGO
CADAbut 3 2 NH
Abutment interface geometry library, 3.2 NH platform, restoration design in exocad.
BEGO
CADAbut 5 2 DO
Abutment geometry library for CADAbut 5.2 DO interface, implant restorations, exocad DentalCAD.
BEGO
PS CADCAM NH SCSCXRSRSXRI
Implant library for Semados PS connection, non-engaging CAD/CAM variant, for exocad
DIO
UF Sub DIgital ABT DUN 2555
Digital UF Submerged abutment library for designing single crowns and bridges in exocad.
DIO
UF Sub Hybrid Link UFHL 55703
Link geometry for UF Sub hybrid abutment restorations in exocad.
Glidewell/Hahn
NB-RP Multi
Multi-Unit NB-RP interface library for exocad, restorations on Multi-Unit abutments.
Glidewell/Hahn
iii-CE
exocad implant library with iii-CE connection for implant-supported crowns and bridges.
Nucleoss
TiBase Short Scanbody
Ti-Base with short scanbody for exocad; single crowns, small bridges, limited space.
Paltop
Ti-Abut Blank
Titanium abutment blanks for milling custom abutments in exocad DentalCAD.
Sweden & Martina
CAD-CAM SwedenMartina Ti Base
Ti-Base geometry for designing implant-supported restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 55504
Abutment geometry for cement-retained crowns and bridges, UF Submerged platform, exocad.
DIO
UF Sub Cemented ABT SSCA 65204
exocad library for designing crowns and bridges on cementable abutment geometry.
DIO
UF Sub Cemented ABT SSCA 65507
Cemented abutment geometry library, UF Submerged platform, for modeling restorations in exocad
DIO
UF Sub Narrow Non Hex CA
Implant library, narrow Submerged platform, non-hex non-engaging interface, for exocad.
Implant Direct
Smart Base Non Engaging 6mm
Non-engaging titanium base, 6mm height, for screw-retained restoration design in exocad.
Thommen
DyTi-Base PF 4 0 PEEK Removable Screw
Ti-Base for 4.0 PEEK base, removable screw, crowns and bridges in exocad.
BEGO
SubTec CADCAM NH S
CAD/CAM component library, NH S configuration, for implant-supported restoration design in exocad.
BEGO
scanbody BEGO 20big
Digital scanbody reference defining implant axis and orientation for exocad
Cowellmedi
Sub R CMT S06 conid
Implant library for exocad with conical connection for implant-supported restorations.
DIO
UF Sub Cemented ABT SSCA 55305
Cemented abutment library for UF Submerged platform, seating surface for exocad crowns.
DIO
UF Sub Cemented ABT SSCA 65207
Cementable UF Submerged abutment library for designing crowns and bridges in exocad.
DIO
UF Sub Cemented ABT SSCA 75305
Cemented abutment SSCA 75305 library from UF Submerged line for exocad crown design.
DIO
UF Sub DIgital ABT DCR 3555
Abutment library for UF Submerged system, implant-supported restoration design in exocad.
Dentaurum
TwinFit
Implant library for exocad with TwinFit connection geometry for restoration design.
AB Dental
MU-P14C
Multi-Unit geometries for screw-retained restorations on P14C platform, exocad.
Adin
Ti-base Touareg-Unifit UF
Ti-Base geometry for Touareg-Unifit UF connection, implant crowns and bridges, exocad
BEGO
CADAbut 0 7 NH
Abutment library for exocad, designing implant-supported restorations on non-hex connection geometry.
BEGO
CADAbut 8 1 D
Abutment geometry library for designing restorations on 8.1 D platform in exocad
DIO
UF Sub DIgital ABT DLN 2555
Digital abutment library for UF Sub platform, designing implant-supported restorations in exocad.
DIO
UF Sub Hybrid Link UFHL 55501
exocad implant library with Link geometry for crowns, bridges, hybrid restorations on ti-base
BEGO
PS CADCAM SCSCXRSRSXRI
Implant library for exocad DentalCAD, PS connection, CAD/CAM restoration geometries.
DIO
UF Sub Cemented ABT SSCA 55107
Cemented abutment geometry, UF Submerged platform, for exocad implant module.
DIO
UF Sub Cemented ABT SSCA 75307
Cementable abutment SSCA 75307 library, UF Submerged line, for exocad restorations.
BEGO
Conical TTiA NI SCRSX CC stock
exocad implant library: stock titanium base, conical connection, non-rotating configuration.
BEGO
Esthetic TTiA SCSCXRSRSXRI stock
Implant library for exocad DentalCAD, BEGO Esthetic interface, stock abutment restorations.
BEGO
CADAbut 8 1 F
Titanium base library for exocad, modeling implant-supported restorations with precise fit.
BEGO
CADAbut 8 1 NH
Abutment library for designing implant-supported restorations in exocad, non-engaging connection.
BEGO
Conical CADCAM SCXRSX CC
Implant library for exocad: conical connection, engaging SCX/RSX CC configuration.
DIO
UF Sub Cemented ABT SSCA 65105
Cementable abutment geometry, UF Submerged platform, for exocad crown and bridge design
DIO
UF Sub Cemented ABT SSCA 75107
Abutment geometry for cemented restorations, UF Submerged platform, exocad
DIO
UF Sub DIgital ABT DUN 3555
Digital abutment library, UF Submerged platform, for designing crowns and bridges in exocad.
DIO
UF Sub Digital ABT DMR 1540
Digital abutment library, UF Sub platform, DMR 1540 connection, for exocad DentalCAD.
DIO
UF Sub Digital ABT DPR 2570
Abutment library, UF Sub Digital interface, article DPR 2570, for exocad.
DIO
UF Sub Hybrid Link UFHL 55402
Hybrid Link geometry for implant-interface restorations in exocad DentalCAD.
Thommen
DyTi-Base PF 3 5 PEEK Captive Screw
PEEK Ti-Base geometry with captive screw, PF 3.5 platform, exocad.
Thommen
VARIOmulti Gen2 multiunit
Multi-Unit Gen2 component library for screw-retained bridges and bars, exocad.
AB Dental
Pre-Milled Blanks
Pre-milled blank geometries for custom abutments and hybrid implant restorations in exocad.
Anthogyr
Anthogyr-Labside-Temp-Monobloc-SA
Temporary monoblock component geometry for provisional restorations on SA interface, exocad.
BEGO
CADBar 0 5
CADBar geometry library for designing implant-supported bar restorations in exocad.
DIO
UF Sub DIgital ABT DLN 4555
Abutment library for designing DIO implant-supported restorations in exocad.
DIO
UF Sub Hybrid Link UNHl 40553
Link geometry library for hybrid base on UF Submerged platform, exocad.
Implant Direct
Smart Base Engaging 6mm Modified4mm
Engaging SmartBase abutment library, 6mm modified to 4mm height, exocad.
Nucleoss
Angled TiBase Short Scanbody
Angled Ti-Base and short scanbody library for angled screw-channel restorations in exocad.
Anthogyr
Anthogyr-Labside-HealFit-SH-TL
Tissue-level HealFit SH geometries aligning restorations to implants in exocad.
BEGO
CADBar 0 3 AN
CADBar library with AN geometry for designing implant-supported restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 65504
Abutment library for cemented restorations on UF Submerged platform, exocad.
DIO
UF Sub Digital ABT DMR 4555
Abutment library, size DMR 4555, UF Submerged system, for exocad.
AB Dental
MU-P14
Multi-Unit P14 abutment library for designing screw-retained crowns in exocad.
BEGO
CADBar 3 3
Implant library with platform geometry for designing implant-supported restorations in exocad.
BEGO
PS TiB NH SCSCXRSRSXRI
Ti-base library without hexagon for crown and bridge modeling in exocad DentalCAD.
Cowellmedi
Sub N CMT S06 conid
Sub N CMT S06 conid connection geometry for implant restorations in exocad.
Cowellmedi
Sub RN MU Ti 45
Angled 45° Multi-Unit titanium interface geometry, Submerged Regular Narrow platform, exocad.
Cowellmedi
Sub R MU DA 55
Multi-Unit component for screw-retained restorations on 55° angled abutments in exocad.
DIO
UF Sub Cemented ABT SSCA 65107
Cementable UF Submerged abutment, article SSCA 65107, for exocad restoration design.
DIO
UF Sub Digital ABT DMR 1555
Abutment library for UF Submerged platform, superstructure modeling in exocad.
DIO
UF Sub Digital ABT DPR 4555
Abutment library for exocad with UF Submerged connection, DPR 4555 platform.
DIO
UF Sub Hybrid Link UFHL 45503
Link library for exocad: crowns, bridges, hybrid restorations on titanium base.
BEGO
CADAbut 3 1 NH
Interface library for NH connection, designing crowns and bridges in exocad.
BEGO
scanbody BEGO 20small
Scanbody geometry capturing implant position and indexation for BEGO in exocad
Cowellmedi
Sub N MU Bar conid
Multi-Unit geometries and bars for screw-retained bridges and bar suprastructures in exocad.
Cowellmedi
Sub N Ti S06 conid
Submerged Narrow implant library, Ti S06 conical connection, for exocad.
DIO
UF Sub Cemented ABT SSCA 55304
Cemented abutment library, UF Submerged platform, for crown and bridge design in exocad.
DIO
UF Sub Cemented ABT SSCA 65305
Cementable UF Submerged abutment library for modeling crowns and bridges in exocad.
DIO
UF Sub DIgital ABT DUR 4555
Digital UF Submerged abutment, configuration 4555, for implant-supported restorations in exocad.
DIO
UF Sub Hybrid Link UFHL 45702
Hybrid Link library for designing implant restorations on DIO UF Sub platform in exocad.
DIO
UF Sub Narrow Hex CA
Implant library for exocad: narrow Submerged platform, engaging hex connection for restorations.
Implant Direct
Smart Base Engaging 4mm
SmartBase Engaging 4mm abutment library, anti-rotational indexing for single crowns in exocad.
Thommen
DyTi-Base PF 4 5 Coated Captive Screw
Coated 4.5 Ti-Base with captive screw for implant crowns in exocad
Alpha-Bio
Tec CHC
CHC implant interface library for restoration design in exocad.
BEGO
CADAbut 0 5 NH
Abutment library for designing restorations on the 0 5 NH connection in exocad
BEGO
CADAbut 0 7 MultiPlus
Abutment library for exocad, designing implant-supported restorations on the MultiPlus interface.
BEGO
CADAbut 1 2 D
Abutment library for designing implant-supported restorations in exocad DentalCAD.
BEGO
MultiPlus multiunit
Multi-Unit geometries for screw-retained bridges and full-arch restorations in exocad.
Bicon
SHORT Fixed-Detachable MU Scanbody
Scanbody library for fixed-detachable Multi-Unit protocol, Standard and FDA variants, exocad.
Bicon
scanbody bicon 22small
Small 2.2 scanbody library aligning scans with implant position in exocad.
DIO
UF Sub Cemented ABT SSCA 65307
Cementable abutment geometry, UF Submerged platform, for crown and bridge design in exocad.
DIO
UF Sub DIgital ABT DUN 4555
Abutment geometry for designing implant-supported restorations on UF Submerged platform in exocad.
DIO
UF Sub DIgital ABT DUR 3555
Digital UF Submerged abutment library, configuration 3555, for crown and bridge design in exocad.
Noris
InternalHex Direct
Library for direct implant restorations with internal hex connection, exocad DentalCAD.
Thommen
DyTi-Base PF 4 0 Coated Captive Screw
Ti-Base geometry for crowns and bridges, PF 4.0 platform, captive screw, exocad.
BEGO
CADBar 1 4
Implant geometry library for designing implant-supported restorations in exocad DentalCAD.
DIO
UF Sub Cemented ABT SSCA 45204
Subgingival cemented abutment geometry, SSCA 45204 variant, for exocad DentalCAD.
DIO
UF Sub Cemented ABT SSCA 55105
Cemented abutment geometry, UF Submerged platform, for exocad implant module.
Glidewell/Hahn
HIO
Implant library with HIO connection geometry for restorations in exocad DentalCAD.
Thommen
DyTi-Base PF 4 0 PEEK Captive Screw
Ti-Base geometry for PEEK 4.0 variant, captive screw, implant restorations in exocad.
AB Dental
MU-P24 Short Model Analog
Multi-Unit geometries on MU-P24 short model analog for exocad
Bicon
SHORT Fixed-Detachable MU ImplantLevel
exocad library for fixed-detachable bridges at implant level, Multi-Unit component
Cowellmedi
Sub R DA S06 conid
Implant library for exocad with conical connection, for implant-supported restoration design.
DIO
UF Sub Cemented ABT SSCA 45407
Cemented UF Submerged abutment geometry for modeling crowns and bridges in exocad.
DIO
UF Sub DIgital ABT DCR 2555
Abutment library for DIO UF Submerged system, DCR interface, exocad
DIO
UF Sub DIgital ABT DUN 4570
Abutment library for exocad; UF Submerged Digital platform, restoration planning.
DIO
UF Sub Digital ABT DPR 4540
Abutment library for exocad, UF Submerged digital protocol, size 4540, prosthetic geometry.
Sweden & Martina
Premilled Abutment
Premilled abutment blank geometry for designing custom restorations in exocad.
Thommen
Ti-Base peek ScanAb
Ti-Base library with PEEK ScanAb scan abutment for exocad restorations.
Alpha-Bio
IS USA Ti DSP-XV DX
Titanium base library with DSP-XV DX connection for exocad implant module.
BEGO
CADAbut 11 1 F
Abutment geometry library with implant interface for designing restorations in exocad.
BEGO
CADAbut 5 1 D
Abutment geometry library for positioning implant-supported restorations on interface in exocad.
BEGO
Conical CADCAM NI SCXRSX CC
Implant library for exocad: non-rotational interface, conical connection SCX/RSX CC geometry.
Cowellmedi
Int R Ti S06 conid
Implant interface library, internal conical connection, titanium base, for exocad implant module.
Cowellmedi
Sub R ANG S11 conid
Angled S11 conid interface for Submerged Regular platform in exocad
DIO
UF Sub Cemented ABT SSCA 45307
Cemented abutment library for DIO UF Submerged, restoration modeling in exocad.
DIO
UF Sub Cemented ABT SSCA 75404
Cemented abutment geometry for modeling crowns and bridges in exocad.
DIO
UF Sub Hybrid Link UFHL 45402
exocad implant library, Link geometry for UF Sub Hybrid interface, crowns and bridges.
Adin
Ti-base CloseFit RP-WP
Ti-Base components for CloseFit interface, RP and WP platforms, cement or screw-retained restorations in exocad.
Alpha-Bio
Tec CS
Implant library for exocad with CS connection for crowns and bridges.
BEGO
CADBar 2 1
Implant geometry configuration for exocad, links restoration to implant interface.
DIO
UF Sub DIgital ABT DCR 3570
Abutment library for exocad, DIO UF Submerged connection, implant-supported restorations.
DIO
UF Sub Digital ABT DPR 3555
Abutment geometry library, UF Submerged platform, for exocad implant module.
DIO
UF Sub Regular Non Hex CA
Implant library for DIO UF Submerged regular platform, non-engaging, exocad.
Glidewell/Hahn
NB-BM
Implant library for designing implant-supported restorations in exocad DentalCAD.
Thommen
DyTi-Base PF 5 0 PEEK Removable Screw
PEEK Ti-Base geometry, PF 5.0 interface, removable screw, for exocad.
BEGO
CADAbut 3 2 F
Implant library defining 3.2 F interface geometry for modeling suprastructures in exocad.
BEGO
CADAbut 5 1 F
CAD library of abutment geometry, 5.1 F interface, for implant restorations in exocad.
Bicon
SHORT Scannable Abutment stock
Stock scannable abutment geometry for cemented and screw-retained restorations in exocad.
Cowellmedi
Sub R Lock Bar
Bar geometry library for implant-supported bar constructions, Sub R interface, exocad DentalCAD.
Cowellmedi
Sub R Ti S11 stock
Implant library, Submerge R interface, stock S11 variant, for exocad DentalCAD.
DIO
UF Sub Cemented ABT UNSCA 40705
Cemented abutment library for crown and bridge design, Submerged platform, exocad
DIO
UF Sub DIgital ABT DUR 2555
Abutment geometry for UF Submerged Digital DUR platform, exocad implant module.
DIO
UF Sub DIgital ABT DUR 3570
UF Submerged digital abutment library, 3570 platform, for exocad implant restorations.
BEGO
CADBar 0 2
Interface library for designing implant-supported restorations in exocad DentalCAD.
Bicon
SHORT FDUA AbutmentLevel
Abutment-level library with reference geometry for designing restorations in exocad.
Cowellmedi
Sub N Ti A S06 conid
Implant library, Submerged Narrow line, conical connection, for exocad DentalCAD
Cowellmedi
Sub R Ti B S11 conid
Implant library for exocad, Submerge R interface, B/S11 configuration, titanium base.
DIO
UF Sub Cemented ABT SSCA 45104
Cemented abutment geometry, SSCA 45104 platform, for exocad restoration design.
DIO
UF Sub Cemented ABT SSCA 45305
Cemented UF Submerged abutment geometry for crown and bridge modeling in exocad.
DIO
UF Sub Cemented ABT SSCA 45504
Cemented UF Submerged abutment geometry for modeling crowns and bridges in exocad.
DIO
UF Sub Cemented ABT SSCA 55505
Abutment library for exocad, cement-retained restorations on UF Submerged platform
DIO
UF Sub DIgital ABT DUN 5555
Abutment library on UF Submerged Digital platform for implant-supported restorations in exocad.
Implant Direct
Smart Base Non Engaging 4mm
Non-engaging titanium base 4mm for implant-supported restoration design in exocad
BEGO
SubTec CADCAM S
Component library, S configuration, for designing implant-supported restorations in exocad.
Cowellmedi
Int W DA S06 conid
Implant interface, wide platform, conical connection, for restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 45405
Cemented abutment library on UF Submerged platform for exocad restoration design
DIO
UF Sub Cemented ABT SSCA 55307
Cemented UF Submerged abutment geometry, prosthetic base for restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 75505
Cementable abutment CAD geometry, SSCA 75505 connection, for exocad DentalCAD.
DIO
UF Sub DIgital ABT DLN 4570
Abutment library for exocad; implant-supported crowns, bridges and hybrid restorations.
DIO
UF Sub DIgital ABT DUR 5570
UF Submerged digital abutment library, 5570 platform, for exocad DentalCAD restorations.
AB Dental
CP Ti-Bases
Ti-Base geometries for restorations on CP connection in exocad
AB Dental
NP Ti-Bases
Ti-Base geometries for NP platform: crowns and bridges with antirotation, exocad.
BEGO
CADAbut 6 1 NH
Titanium base library for designing implant-supported restorations in exocad.
BEGO
CADBar 17 2 AN
Implant library for exocad; anti-rotational AN interface for single restorations.
BEGO
CADBar 3 1
Geometry configuration from series group three for designing implant restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 75405
Cemented abutment geometry with SSCA 75405 connection for exocad-implant.
DIO
UF Sub UV PLUS ABT DC
Abutment geometry for UF Submerged UV PLUS interface, implant restoration modeling in exocad DentalCAD.
Glidewell/Hahn
MG-AR
Implant library with MG-AR interface for implant-supported restorations in exocad.
AB Dental
SP Ti-Bases
Ti-Base library for exocad, SP platform, screw-retained crowns and bridges.
Bicon
SHORT Fixed-Detachable MU Cast
Castable component for Multi-Unit fixed-detachable, Standard and FDA variants, exocad.
DIO
UF Sub Cemented ABT SSCA 65304
Cemented abutment geometry, UF Submerged platform, for crown modeling in exocad.
DIO
UF Sub Cemented ABT SSCA 75204
Cementable stock abutment library for UF Submerged platform, exocad crown/bridge design.
DIO
UF Sub DIgital ABT DLN 2570
Abutment library for positioning restorations on DIO platform in exocad.
Euroteknika
Naturactisd3 NaturallPlusd3
Component library for Ø3 narrow-diameter implants, restorative design in exocad DentalCAD.
Thommen
VARIOmulti Ti-Base multiunit support
Ti-Base with Multi-Unit interface for crowns and bridges, exocad
Anthogyr
Anthogyr-Labside-Flexibase-DT
Flexibase Ti-base library for implant-supported restoration design in exocad.
BEGO
CADAbut 1 2 F
Implant interface library for designing implant-supported restorations in exocad.
BEGO
CADAbut 1 4 NH
Abutment geometry library for designing implant-supported crowns and bridges in exocad.
Bicon
SHORT FDUA Copings
Coping geometry on SHORT FDUA abutment for single crowns and bridges, exocad.
DIO
UF Sub Cemented ABT SSCA 45507
Cemented UF Submerged abutment geometry library for modeling restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 55507
Abutment CAD geometry for cement-retained crowns and bridges, UF Submerged platform, exocad.
DIO
UF Sub Cemented ABT SSCA 75304
Cementable stock abutment library for exocad, restoration modeling on UF Submerged platform.
Glidewell/Hahn
CL
CL implant library for designing implant-supported restorations in exocad.
Thommen
DyTi-Base PF 4 0 Coated Removable Screw
Coated 4.0 Ti-Base geometry, removable screw, crowns and bridges, exocad.
BEGO
CADAbut 16 1 F
Abutment geometry library for designing implant-supported restorations in exocad.
BEGO
CADAbut 5 2 F
CAD library for exocad defining abutment geometry, 5.2 F platform, implant-supported restorations.
BEGO
CADAbut 8 1 DO
Abutment geometry library with 8.1 DO interface for exocad DentalCAD.
Cowellmedi
Sub R Lock DA
Implant library for exocad, Sub R Lock connection, for implant-supported restoration design.
DIO
UF Sub Cemented ABT SSCA 55204
Abutment library for exocad, UF Submerged platform, cemented crowns and bridges.
DIO
UF Sub Digital ABT DMR 2555
UF Submerged Digital abutment library, size DMR 2555, for implant crown and bridge design in exocad.
DIO
UF Sub Digital ABT DMR 3570
Abutment library, DMR 3570 size, UF Submerged connection, for exocad.
DIO
UF Sub Digital ABT DPR 1570
Abutment geometry library, article DPR 1570, UF Sub Digital interface, for exocad.
DIO
UF Sub Digital ABT DPR 2540
Abutment library with UF Sub Digital interface, article DPR 2540, for exocad.
Glidewell/Hahn
PR-CNX
Implant library for exocad with PR-CNX connection geometry for implant-supported restorations
BEGO
Conical MultiPlus SCXRSX CC
Implant library for exocad with conical MultiPlus interface, SCX/RSX CC configuration.
Cowellmedi
Int W Ti S10 conid
Implant library, Internal W platform, S10 conid configuration, for exocad.
Cowellmedi
Sub R CMT S11 conid
Connection library providing digital interface geometry for implant restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 75105
Cemented abutment component for UF Submerged platform in exocad implant module.
DIO
UF Sub Digital ABT DMR 3555
Abutment library, UF Submerged DMR 3555, for crowns and bridges in exocad.
Glidewell/Hahn
INC IOSSA
Implant library with IOSSA scanbody geometry for implant-supported restoration design in exocad.
Glidewell/Hahn
MU
Multi-Unit abutment library for screw-retained restorations on angled and straight platforms, exocad.
Anthogyr
Anthogyr-Labside-Temp-Monobloc-DT
Temporary monobloc component geometry for provisional restorations, DT interface, exocad.
BEGO
CADBar 0 7
Bar geometry library for implant-supported restoration design in exocad DentalCAD.
BEGO
Provisorischer Aufbau stock
Standard temporary abutment library for designing provisional restorations in exocad.
Thommen
Milling Abutment peek ScanAb
PEEK ScanAb geometry for designing custom milling abutments in exocad.
BEGO
CADAbut 0 6 NH
Abutment library with NH connection for designing custom restorations in exocad.
Cowellmedi
Sub R Lock Ti
Implant library with titanium interface for cemented and screw-retained restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 75205
Cementable stock abutment SSCA 75205 library for restoration modeling in exocad.
Nucleoss
TiBase
Ti-Base library for exocad: designing crowns and bridges on titanium base
BEGO
CADAbut 1 4 D
Abutment library for exocad: digital base for designing implant-supported crowns and bridges.
BEGO
CADAbut 6 1 D
Titanium base library with 6.1 D platform interface for exocad implant design.
BEGO
Conical PMB SCRSX CC
Implant library for the conical PMB interface, SCR/SX CC configuration, exocad.
Bicon
scanbody bicon 22big
Scanbody for 2.2 platform, detects implant position and axis in exocad
Cowellmedi
Int W Ti S06 conid
Titanium base support geometry for implant restorations, S06 conid connection, exocad.
Cowellmedi
Sub N CMT S11 conid
Implant interface, conical connection, conid variant, for designing implant restorations in exocad.
Cowellmedi
Sub R DA S11 conid
Implant library with Sub R DA S11 conical connection for exocad.
DIO
UF Sub Cemented ABT SSCA 75504
Cemented abutment SSCA 75504 geometry for exocad implant module modeling.
Glidewell/Hahn
EV IOSDP
Implant library for exocad with system geometry, for designing implant-supported restorations.
Adin
TMA multiunit
Multi-Unit components for designing screw-retained restorations on multi-unit abutments in exocad.
Anthogyr
Anthogyr-Labside-Flexibase-MDT
Flexibase MDT implant library for implant-supported prosthetic design in exocad.
Anthogyr
Anthogyr-Labside-Temp-Abutment-MDT
Temporary abutment geometries for provisional implant-supported restorations, MDT interface, exocad.
Anthogyr
Labside MDT
Implant library for exocad to design implant-supported dental restorations.
BEGO
CADAbut 1 4 DO
Abutment library for prosthetic modeling on BEGO implants in exocad.
BEGO
PS TiB SCSCXRSRSXRI
Implant library with PS interface for designing crowns and bridges in exocad.
BEGO
scanbody bridge BEGO 06
Scanbody geometry for multi-implant bridge restorations in exocad DentalCAD
Cowellmedi
Int W DA S10 conid
Internal conical connection interface library, Wide platform, for exocad implant module.
DIO
UF Sub Cemented ABT SSCA 75207
Cementable stock abutment, UF Submerged geometry for crowns and bridges in exocad.
DIO
UF Sub Hybrid Link UFHL 55702
Link geometry library for implant-supported restorations on UF Sub Hybrid platform in exocad.
DIO
V4mkr-TiBase DIO-UF2
Ti-Base geometry for V4mkr platform, UF2 interface, restoration modeling in exocad.
Nucleoss
T6 TS MU TiBase
Implant library with Multi-Unit and Ti-Base components for screw-retained restorations in exocad.
BEGO
CADBar 1 2
Implant bar geometries with interface data for designing implant-supported restorations in exocad.
DIO
UF Sub Cemented ABT SSCA 45105
Abutment library for cemented restorations on UF Sub platform, exocad.
Implant Direct
DIRECTscan DIRECTarch
Scan flags and full-arch workflow library for exocad, arch-level restoration design.
AB Dental
Direct on MU
Multi-Unit geometries for screw-retained bridges and full-arch frameworks in exocad.
BEGO
CADAbut 0 7 D
Abutment geometry for modeling restorations in the exocad DentalCAD implant module.
BEGO
CADAbut 2 1 F
Implant library with interface geometry for restoration modeling in exocad.
Cowellmedi
Sub N Ti A S11 conid
Implant library, Submerged Narrow connection, Ti A S11 configuration, for exocad.
Cowellmedi
Sub R MU Bar 45 conid
Multi-Unit and bar components for screw-retained frameworks, 45° conical platform, exocad.
DIO
UF Sub Cemented ABT SSCA 45207
Subgingival cemented abutment geometry, UF connection, for exocad DentalCAD.
DIO
UF Sub Cemented ABT SSCA 65104
Abutment geometry for cemented restorations on UF Submerged platform, exocad.
DIO
UF Sub Digital ABT DPR 4570
Abutment library, UF Submerged DPR 4570 platform, for prosthetic design in exocad.
DIO
UF Sub Hybrid Link UFHL 55701
Implant library with Link geometry for modeling restorations in exocad.
Euroteknika
IboneE IboneS Naturactis NateaPlus NaturallPlus
Implant geometry library covering several families for restoration design in exocad.
Nothing found