Camlog · exocad DentalCAD — Implants Implants Conical 96 Free PRO

Camlog CONELOG Gingividual-basic for Ti-base-CADCAM-free

camlog_CONELOG_Gingividual-basic_for_Ti-base-CADCAM-free.zip · 8.8 МБ
Register to downloadDownload (PRO)DownloadGet PRO Quick sign-up in 30 secondsThis library can be downloaded with a PRO subscription.The download will start automatically.This library can be downloaded with a PRO subscription.
Included in PRO
  • Access to all popular brands
  • Help with choosing and installing libraries
  • Updates and catalog additions
Component typeTi-Base (titanium base)
ConnectionConical

This library is the free-rotation variant of the Camlog CONELOG Gingividual-basic Ti-Base CADCAM set for the CONELOG conical connection in exocad DentalCAD. It provides the Ti-Base geometry without a defined rotational position, which is typical for splinted bridge or bar situations where divergent implants must be joined into one prosthesis.

The implant wizard uses this geometry to place the bonding base, screw channel and prosthetic seat correctly even when several implants are connected. Designers can use it for short and longer bridges on multiple CONELOG implants, choosing the most convenient screw access.

The geometry corresponds to the original Camlog Ti-Base interface for an accurate fit of the milled mesostructure. The library is intended for laboratories producing multi-unit CAD/CAM work on CONELOG and can be downloaded from the catalog.

Camlog CONELOG Gingividual-basic for Ti-base-CADCAM-free
Report an error
#exocad-implant#implant#camlog
Helpful resources
PRO

Unlock PRO access

All popular brands and every catalog update. Pay by card, SBP or crypto.

$50 $30 · 30 days −40%
МИР СБП ₿ Secure payment: MIR card, SBP or crypto
Get PRO
Pay after installation

We install any version of digital dentistry software

exocad, exoplan, exocad DentalCAD, RealGUIDE and more — installed and configured on your computer. Pay after installation.

Contact support

FAQ

How do I install the Camlog CONELOG Gingividual-basic for Ti-base-CADCAM-free library in exocad DentalCAD — Implants?
Download the archive with the Download button, unzip it and place the library folder into DentalCADApp\library\implant inside your exocad folder, then restart the program. exocad is portable, so the path is relative to its folder.
What is inside the camlog_CONELOG_Gingividual-basic_for_Ti-base-CADCAM-free.zip archive?
The camlog_CONELOG_Gingividual-basic_for_Ti-base-CADCAM-free.zip archive (8.8 МБ) contains the Camlog CONELOG Gingividual-basic for Ti-base-CADCAM-free library files for exocad DentalCAD — Implants.
Which connection does Camlog CONELOG Gingividual-basic for Ti-base-CADCAM-free support?
The library is designed for the Conical connection. Analogues with the same connection type are listed on the connection page in the catalog.
Is the download paid?
Most libraries in the catalog are free after signing in. Some popular libraries are part of the PRO subscription — the current status is shown on the download button.

Analogs — same connection

Conical →

Similar libraries