Osstem/Hiossen
TS DR Standard
Implant library for exocad, TS DR Standard geometry, crown and bridge design
Osstem/Hiossen — exocad DentalCAD — Implants
97 libraries
Osstem/Hiossen — 97 libraries for exocad DentalCAD — Implants in the catalog.
Osstem/Hiossen is one of the most widely used dental implant systems, and its exocad DentalCAD libraries in this catalog cover the titanium-base, abutment and multi-unit geometries needed to design implant-supported restorations. The collection spans ninety-seven product lines — including Osstem/Hiossen ET-type Regular, Osstem/Hiossen ET SBO CU and Osstem/Hiossen Hybrid-Hiossen HIO — giving CAD technicians reference shapes for screw-retained crowns, bridges and full-arch restorations on Osstem fixtures.
Osstem/Hiossen
TS Temporary stock
Temporary abutment library for designing provisional implant-supported restorations in exocad.
Osstem/Hiossen
SS DR Minus20
Implant geometry library for SS DR position, offset -20, exocad.
Osstem/Hiossen
SS SBO LI
Implant library with SS SBO LI connection for restoration design in exocad.
Osstem/Hiossen
TS DR Minus40
exocad implant library for tilted implants with -40° angle correction.
Osstem/Hiossen
TS DR Plus30
Implant library with +30 angulation for implant-supported restoration design in exocad.
Osstem/Hiossen
KS SBO CU
KS SBO CU connection geometry library for prosthetic design in exocad DentalCAD.
Osstem/Hiossen
OSS TSIII NP Custom-TiBase T3
Ti-Base geometry with TSIII NP interface for custom restorations in exocad.
Osstem/Hiossen
OSS TSIII RP Custom-TiBase T5
Ti-Base geometry, straight custom base T5, regular platform TSIII, exocad.
Osstem/Hiossen
SS SBO CU
Implant library for exocad, SS SBO CU connection, designing implant-supported restorations.
Osstem/Hiossen
TS LinkV1 stock
TS LinkV1 stock implant library for designing restorations in exocad.
Osstem/Hiossen
OSS TSIII RP Implant-level
Implant-level components for TSIII regular platform, modeling in exocad.
Osstem/Hiossen
TS DR Plus10
Implant library, TS DR geometry with +10 angulation, for exocad restorations
Osstem/Hiossen
TS SB TR
Implant interface library for TS SB TR connection, prosthetics in exocad DentalCAD.
Osstem/Hiossen
KS SBO LI
Implant geometries for exocad DentalCAD, KS SBO connection in LI variant.
Osstem/Hiossen
OSS TSIII NP Implant-level
Implant-level components for TSIII implant system, narrow platform, for exocad.
Osstem/Hiossen
SS DR Minus30
Implant geometry library for SS DR platform, offset -30, exocad.
Osstem/Hiossen
TS MultiSB MU
Implant library with Multi-Unit component for screw-retained multi-unit restorations, TS MultiSB interface, exocad.
Osstem/Hiossen
TS NE SBO CU
TS implant system non-engaging scanbody library for multi-unit splinted restorations in exocad.
Osstem/Hiossen
US SB CE
Implant library for exocad, US SB CE connection, crown and bridge modeling.
Osstem/Hiossen
Multiangle multiunit
Multi-Unit components for designing screw-retained restorations on multi-unit abutments in exocad.
Osstem/Hiossen
OSS TSIII RP Custom-TiBase-Angled T3
Angled Ti-Base component for TSIII regular platform, exocad library.
Osstem/Hiossen
SS SB CO
exocad implant library: digital interface for designing restorations on implant.
Osstem/Hiossen
TS DR Minus10
Implant library for exocad, TS DR variant with −10 angle offset.
Osstem/Hiossen
TS DR Plus80
Implant library for designing single crowns and bridges in exocad.
Osstem/Hiossen
TS SBO MuATi
Angled titanium multi-unit abutment library for implant-supported restorations in exocad
Osstem/Hiossen
TS SH V1 CU
Implant library for TS SH interface, first revision, exocad DentalCAD.
Osstem/Hiossen
TS TR TR
Implant library with TR connection for restoration modeling in exocad.
Osstem/Hiossen
ET-type Regular
Implant library for exocad with ET-type Regular connection for restoration design.
Osstem/Hiossen
SS SB COP
Implant library for exocad with SS SB COP connection geometry for restorations.
Osstem/Hiossen
SS SB OT
Implant library for the SS SB OT platform, designing implant-supported restorations in exocad.
Osstem/Hiossen
TS DR Minus20
Implant library for exocad, -20° angulated variant for implant-supported restorations.
Osstem/Hiossen
TS DR Minus30
Implant library, TS DR connection, -30° angled abutments for tilted restorations in exocad
Osstem/Hiossen
TS DR Temporary
Implant library for exocad: temporary implant-supported restorations on TS DR interface.
Osstem/Hiossen
TS SB AN
Implant library for exocad: SB AN variant on TS connection, geometry for implant-supported restoration design.
Osstem/Hiossen
TS SBO AN
TS connection library with engaging scanbody for antirotational single-crown indexing in exocad.
Osstem/Hiossen
TS SBO MU
Multi-Unit library for screw-retained restorations on straight and angled abutments, exocad.
Osstem/Hiossen
US SB CU
Implant library with reference geometry for modeling restorations in exocad.
Osstem/Hiossen
US SBO CU
Implant library with US SBO CU connection geometry for exocad.
Osstem/Hiossen
KS SB TR
Implant library for exocad covering KS SB TR connection geometry.
Osstem/Hiossen
SS SBO COP
Implant library for exocad with SS SBO COP connection interface.
Osstem/Hiossen
TS DR Plus20
TS implant library with +20 angled interface for restoration design in exocad.
Osstem/Hiossen
TS SBO LI V1
TS implant connection library, LI reference v1, scanbody-based, for exocad.
Osstem/Hiossen
US SB LI
Implant library for exocad DentalCAD: positioning and modeling implant-supported restorations.
Osstem/Hiossen
TS DR Plus60
TS DR implant library with +60° angled channel for exocad
Osstem/Hiossen
KS SB LI
KS SB geometry library, LI variant, for implant-supported restoration design in exocad.
Osstem/Hiossen
KS TR TR
Implant library with TR TR connection for restoration design in exocad.
Osstem/Hiossen
SS CO CO
Implant library, SS CO CO connection, for implant-supported restorations in exocad.
Osstem/Hiossen
SS DR Minus10
Implant geometry library for SS DR position, -10 offset variant, exocad.
Osstem/Hiossen
SS DR Plus20
Implant library with digital geometries for designing implant-supported restorations in exocad.
Osstem/Hiossen
SS DR Plus40
Implant library for exocad: component geometry for restoration modeling on implant.
Osstem/Hiossen
SS DR Plus80
exocad implant library with digital support geometry for restoration design on implant.
Osstem/Hiossen
TS SBO MuTi
exocad implant library: straight titanium MuTi configuration geometry for restoration design.
Osstem/Hiossen
KS SB CU
Geometry library KS SB, CU variant, for prosthetic design in exocad DentalCAD.
Osstem/Hiossen
SS DR Minus60
Implant geometry library, SS DR platform, -60 offset variant, for exocad.
Osstem/Hiossen
TS SB CU
Implant library for exocad: connection geometry for implant-supported restoration design.
Osstem/Hiossen
US CE CE
Implant library with US CE connection for designing restorations in exocad.
Osstem/Hiossen
US SH CU
Implant library with geometry for aligning and designing restorations in exocad.
Osstem/Hiossen
OSS TSIII NP Custom-TiBase T5
Ti-Base geometry for TSIII NP interface, T5 variant, custom restoration design in exocad.
Osstem/Hiossen
SS DR Standard
Implant library for exocad with SS DR Standard connection geometry.
Osstem/Hiossen
SS SB CO G002
Implant interface library for designing restorations on SS SB CO platform in exocad.
Osstem/Hiossen
OSS TSIII RP Custom-TiBase T3
Ti-Base component: straight custom T3 titanium base, TSIII regular platform, exocad.
Osstem/Hiossen
OSS TSIII RP Custom-TiBase-Angled T5
Ti-Base geometry for angled custom T5 configuration, TSIII RP platform, exocad.
Osstem/Hiossen
TS SBO CU
exocad implant library with TS scanbody interface for crowns and bridges
Osstem/Hiossen
TS Transfer stock
Library with TS-connection stock transfer component geometry for implant-supported restorations in exocad.
Osstem/Hiossen
ET SBO TR
Implant library for exocad with ET SBO TR connection geometries for restoration design.
Osstem/Hiossen
SS COP COP
Implant library with SS COP COP connection for designing crowns and bridges in exocad.
Osstem/Hiossen
SS DR Temporary
SS DR temporary component with Osstem connection for exocad DentalCAD.
Osstem/Hiossen
SS SB CU
Implant library for exocad with interface geometry for implant-supported restoration design.
Osstem/Hiossen
TS LinkSB LI V1
Implant library with TS LinkSB LI interface for designing restorations in exocad.
Osstem/Hiossen
TS SBO LI V2
Implant library for exocad, TS platform, designing implant-supported restorations geometry.
Osstem/Hiossen
multiunit support
Implant library for exocad with Multi-Unit geometries for screw-retained bridges and full arches
Osstem/Hiossen
TS SB LI V2
exocad implant library for restorations on TS SB LI interface, second revision.
Osstem/Hiossen
TS SB MU
Multi-Unit abutment library, TS SB platform, screw-retained full-arch bridges, exocad
Osstem/Hiossen
TS SBO TR
Implant library for exocad, restorations on TS SBO TR connection.
Osstem/Hiossen
ET SBO CU
Implant library for exocad, ET SBO CU interface, implant-supported restorations.
Osstem/Hiossen
Hybrid-Hiossen HIO
Implant library for designing implant-supported restorations on HIO connection in exocad
Osstem/Hiossen
multiunit
Multi-Unit implant library for screw-retained bridges and full-arch restorations in exocad.
Osstem/Hiossen
SS SB LI
Implant library for SS SB LI connection, designing restorations in exocad.
Osstem/Hiossen
US SBO LI
Implant library for exocad providing geometry for modeling implant-supported crowns and bridges.
Osstem/Hiossen
KS SBO TR
KS SBO connection geometry library, TR variant, for prosthetic design in exocad.
Osstem/Hiossen
SS CO CO G002
Implant library, SS CO connection, G002 interface, for exocad restoration design.
Osstem/Hiossen
SS DR Plus10
Implant geometry library, SS DR platform, +10 offset variant, for exocad.
Osstem/Hiossen
TS DR Minus60
Implant library for TS DR geometry with -60 angulation, exocad.
Osstem/Hiossen
TS DR Plus40
Implant library with TS DR geometry, +40 angular offset, for exocad restorations.
Osstem/Hiossen
OSS TSIII RP Implant-level-Angled
TSIII implant library, RP platform, angled implant-level interface for exocad.
Osstem/Hiossen
SS DR Minus40
Implant geometry library for SS DR platform, -40 offset, for exocad DentalCAD.
Osstem/Hiossen
SS DR Plus30
Implant library for exocad with reference geometry for prosthetic restoration on this platform.
Osstem/Hiossen
SS DR Plus60
Implant library with digital geometry for designing implant-supported restorations in exocad.
Osstem/Hiossen
SS SBO CO
Implant library with SS SBO connection for restoration design in exocad
Osstem/Hiossen
SS SBO CO G002
Implant library, SS SBO CO interface, for implant-supported restoration design in exocad.
Osstem/Hiossen
SS SBO OT
Implant library geometry for designing implant-supported crowns and bridges in exocad.
Osstem/Hiossen
SS SH CU
Implant library for exocad: SS SH CU connection geometry for implant-supported restorations.
Osstem/Hiossen
TS MultiSB MuTi
Implant library with multi-unit scanbody for exocad; prostheses on multi-unit abutments, single and full-arch.
Osstem/Hiossen
TS NE SB CU
Non-engaging TS interface library on scanbody for splinted bridges, exocad.
Osstem/Hiossen
TS SB LI V1
Implant library for exocad DentalCAD defining connection geometry for implant-supported restorations.
Osstem/Hiossen
US SBO CE
Implant library with SBO CE geometry and connection for exocad.
Nothing found
FAQ — Osstem/Hiossen
How do I install an Osstem/Hiossen library in exocad DentalCAD?
After signing in, the Download button delivers the file directly. Unzip the archive and place the library folder into the exocad DentalCAD implant library directory, or add it through exocad Library Manager, then restart DentalCAD so the Osstem/Hiossen components appear in the implant selection.
How many Osstem/Hiossen libraries are in the catalog?
The catalog holds ninety-seven Osstem/Hiossen product lines, including Osstem/Hiossen ET-type Regular, Osstem/Hiossen ET SBO CU, Osstem/Hiossen ET SBO TR and Osstem/Hiossen Hybrid-Hiossen HIO, covering the ET and hybrid system geometries for DentalCAD.
What are Osstem/Hiossen libraries used for in the DentalCAD workflow?
They supply the titanium-base, abutment and multi-unit reference geometries used to design screw-retained crowns, bridges and full-arch restorations on Osstem and Hiossen implants, ensuring the digital design matches the physical prosthetic components.
What format do the Osstem/Hiossen libraries come in?
Each library is delivered as a ZIP archive containing exocad DentalCAD-compatible files, ready to be extracted into the DentalCAD implant library folder or imported through exocad Library Manager.